Oil shale

For the scientific-technical journal, see Oil Shale (journal).

Not to be confused with Shale oil or Tight oil.

Oil shale is an organic-rich fine-grained sedimentary rock containing kerogen (a solid mixture of organic chemical compounds) from which liquid hydrocarbons can be produced. In addition to kerogen, general composition of oil shales constitutes inorganic substance and bitumens. Based on their deposition environment, oil shales are classified as marine, lacustrine and terrestrial oil shales.^[1][2] Oil shales differ from oil-bearing shales, shale deposits that contain petroleum (tight oil) that is sometimes produced from drilled wells. Examples of oil-bearing shales are the Bakken Formation, Pierre Shale, Niobrara Formation, and Eagle Ford Formation.^[3] Accordingly, shale oil produced from oil shale should not be confused with tight oil, which is also frequently called shale oil.^[3][4][5]

Oil shale

Sedimentary rock
Combustion of oil shale
Composition
Primary	Kerogen Quartz Feldspar Clay Carbonate Pyrite
Secondary	Uranium Iron Vanadium Nickel Molybdenum

Deposits of oil shale occur around the world, including major deposits in the United States. A 2016 estimate of global deposits set the total world resources of oil shale equivalent of 6.05 trillion barrels (962 billion cubic metres) of oil in place.^[6] Oil shale has gained attention as a potential abundant source of oil.^[7][8] However, the various attempts to develop oil shale deposits have had limited success. Only Estonia and China have well-established oil shale industries, and Brazil, Germany, and Russia utilize oil shale to some extent.^[9]

Oil shale can be burned directly in furnaces as a low-grade fuel for power generation and district heating or used as a raw material in chemical and construction-materials processing.^[1] Heating oil shale to a sufficiently high temperature causes the chemical process of pyrolysis to yield a vapor. Upon cooling the vapor, the liquid unconventional oil, called shale oil, is separated from combustible oil-shale gas. Shale oil is a substitute for conventional crude oil; however, extracting shale oil is costlier than the production of conventional crude oil both financially and in terms of its environmental impact.^[10] Oil-shale mining and processing raise a number of environmental concerns, such as land use, waste disposal, water use, waste-water management, greenhouse-gas emissions and air pollution.^[11][12]

Geology

Main article: Oil shale geology

 

Outcrop of Ordovician oil shale (kukersite), northern Estonia

Oil shale, an organic-rich sedimentary rock, belongs to the group of sapropel fuels.^[13] It does not have a definite geological definition nor a specific chemical formula, and its seams do not always have discrete boundaries. Oil shales vary considerably in their mineral content, chemical composition, age, type of kerogen, and depositional history, and not all oil shales would necessarily be classified as shales in the strict sense.^[14][15] According to the petrologist Adrian C. Hutton of the University of Wollongong, oil shales are not "geological nor geochemically distinctive rock but rather 'economic' term".^[16] Their common defining feature is low solubility in low-boiling organic solvents and generation of liquid organic products on thermal decomposition.^[17] Geologists can classify oil shales on the basis of their composition as carbonate-rich shales, siliceous shales, or cannel shales.^[18]

Oil shale differs from bitumen-impregnated rocks (other so-called unconventional resources such as oil sands and petroleum reservoir rocks), humic coals and carbonaceous shale. While oil sands do originate from the biodegradation of oil, heat and pressure have not (yet) transformed the kerogen in oil shale into petroleum, which means its maturation does not exceed early mesocatagenetic.^[17][19][20] Oil shales differ also from oil-bearing shales, shale deposits that contain tight oil that is sometimes produced from drilled wells. Examples of oil-bearing shales are the Bakken Formation, Pierre Shale, Niobrara Formation, and Eagle Ford Formation.^[3] Accordingly, shale oil produced from oil shale should not be confused with tight oil, which is called also frequently shale oil.^[3][4][5]

 

Photomicrographs showing a cannel coal (top) 100% organic matrix and a rich oil shale (bottom) with relatively low mineral content

General composition of oil shales constitutes inorganic matrix, bitumens, and kerogen. While the bitumen portion of oil shales is soluble in carbon disulfide, the kerogen portion is insoluble in carbon disulfide and may contain iron, vanadium, nickel, molybdenum, and uranium.^[21][22] Oil shale contains a lower percentage of organic matter than coal. In commercial grades of oil shale the ratio of organic matter to mineral matter lies approximately between 0.75:5 and 1.5:5. At the same time, the organic matter in oil shale has an atomic ratio of hydrogen to carbon (H/C) approximately 1.2 to 1.8 times lower than for crude oil and about 1.5 to 3 times higher than for coals.^[13][23][24] The organic components of oil shale derive from a variety of organisms, such as the remains of algae, spores, pollen, plant cuticles and corky fragments of herbaceous and woody plants, and cellular debris from other aquatic and land plants.^[23][25] Some deposits contain significant fossils; Germany's Messel Pit has the status of a UNESCO World Heritage Site. The mineral matter in oil shale includes various fine-grained silicates and carbonates.^[1][13] Inorganic matrix can contain quartz, feldspar, clay (mainly illite and chlorite), carbonate (calcite and dolomite), pyrite and some other minerals.^[22]

Another classification, known as the van Krevelen diagram, assigns kerogen types, depending on the hydrogen, carbon, and oxygen content of oil shales' original organic matter.^[15] The most commonly used classification of oil shales, developed between 1987 and 1991 by Adrian C. Hutton, adapts petrographic terms from coal terminology. This classification designates oil shales as terrestrial, lacustrine (lake-bottom-deposited), or marine (ocean bottom-deposited), based on the environment of the initial biomass deposit.^[1][2] Known oil shales are predominantly of aquatic (marine, lacustrine) origin.^[17][2] Hutton's classification scheme has proven useful in estimating the yield and composition of the extracted oil.^[26]

Resource

Main article: Oil shale reserves

 

Fossils in Ordovician oil shale (kukersite), northern Estonia

As source rocks for most conventional oil reservoirs, oil shale deposits are found in all world oil provinces, although most of them are too deep to be exploited economically.^[27] As with all oil and gas resources, analysts distinguish between oil shale resources and oil shale reserves. "Resources" refer to all oil shale deposits, while "reserves" represent those deposits from which producers can extract oil shale economically using existing technology. Since extraction technologies develop continuously, planners can only estimate the amount of recoverable kerogen.^[10][1] Although resources of oil shale occur in many countries, only 33 countries possess known deposits of potential economic value.^[28][29] Well-explored deposits, potentially classifiable as reserves, include the Green River deposits in the western United States, the Tertiary deposits in Queensland, Australia, deposits in Sweden and Estonia, the El-Lajjun deposit in Jordan, and deposits in France, Germany, Brazil, China, southern Mongolia and Russia. These deposits have given rise to expectations of yielding at least 40 liters of shale oil per tonne of oil shale, using the Fischer Assay.^[1][15]

A 2016 estimate set the total world resources of oil shale equivalent to yield of 6.05 trillion barrels (962 billion cubic metres) of shale oil, with the largest resource deposits in the United States accounting more than 80% of the world total resource.^[6] For comparison, at the same time the world's proven oil reserves are estimated to be 1.6976 trillion barrels (269.90 billion cubic metres).^[30] The largest deposits in the world occur in the United States in the Green River Formation, which covers portions of Colorado, Utah, and Wyoming; about 70% of this resource lies on land owned or managed by the United States federal government.^[31] Deposits in the United States constitute more than 80% of world resources; other significant resource holders being China, Russia, and Brazil.^[6] The amount of economically recoverable oil shale is unknown.^[27]

History

Main article: History of the oil shale industry

 

Production of oil shale in millions of metric tons, from 1880 to 2010. Source: Pierre Allix, Alan K. Burnham.^[32]

Humans have used oil shale as a fuel since prehistoric times, since it generally burns without any processing.^[33] Around 3000 BC, "rock oil" was used in Mesopotamia for road construction and making architectural adhesives.^[34] Britons of the Iron Age used tractable oil shales to fashion cists for burial,^[35] or just polish it to create ornaments.^[36]

In the 10th century, the Arab physician Masawaih al-Mardini (Mesue the Younger) described a method of extraction of oil from "some kind of bituminous shale".^[37] The first patent for extracting oil from oil shale was British Crown Patent 330 granted in 1694 to Martin Eele, Thomas Hancock and William Portlock, who had "found a way to extract and make great quantities of pitch, tarr, and oyle out of a sort of stone".^[34][38][39]

Modern industrial mining of oil shale began in 1837 in Autun, France, followed by exploitation in Scotland, Germany, and several other countries.^[40][41] Operations during the 19th century focused on the production of kerosene, lamp oil, and paraffin; these products helped supply the growing demand for lighting that arose during the Industrial Revolution, supplied from Scottish oil shales.^[42] Fuel oil, lubricating oil and grease, and ammonium sulfate were also produced.^[43] Scottish production peaked in around 1913, operating 120 oil shale works,^[44] producing 3,332,000 tonnes of oil shale, generating around 2% of the global production of petroleum.^[45] The Scottish oil-shale industry expanded immediately before World War I partly because of limited access to conventional petroleum resources and the mass production of automobiles and trucks, which accompanied an increase in gasoline consumption; but mostly because the British Admiralty required a reliable fuel source for their fleet as war in Europe loomed.

 

Autun oil shale mines

Although the Estonian and Chinese oil-shale industries continued to grow after World War II, most other countries abandoned their projects because of high processing costs and the availability of cheaper petroleum.^{[1][41][46][47]} Following the 1973 oil crisis, world production of oil shale reached a peak of 46 million tonnes in 1980 before falling to about 16 million tonnes in 2000, because of competition from cheap conventional petroleum in the 1980s.^[11][28]

On 2 May 1982, known in some circles as "Black Sunday", Exxon canceled its US$5 billion Colony Shale Oil Project near Parachute, Colorado, because of low oil prices and increased expenses, laying off more than 2,000 workers and leaving a trail of home foreclosures and small business bankruptcies.^[48] In 1986, President Ronald Reagan signed into law the Consolidated Omnibus Budget Reconciliation Act of 1985, which among other things abolished the United States' Synthetic Liquid Fuels Program.^[49]

The global oil-shale industry began to revive at the beginning of the 21st century. In 2003, an oil-shale development program restarted in the United States. Authorities introduced a commercial leasing program permitting the extraction of oil shale and oil sands on federal lands in 2005, in accordance with the Energy Policy Act of 2005.^[50][51]

Industry

Main article: Oil shale industry

 

Shell's experimental in-situ oil-shale facility, Piceance Basin, Colorado, US

As of 2008^[update], oil shale is utilized primarily in Brazil, China, Estonia and to some extent in Germany, and Russia. Several additional countries started assessing their reserves or had built experimental production plants, while others had phased out their oil shale industry.^[9] Oil shale serves for oil production in Estonia, Brazil, and China; for power generation in Estonia, China, and Germany; for cement production in Estonia, Germany, and China; and for use in chemical industries in China, Estonia, and Russia.^{[9][47][52][53]}

As of 2009^[update], 80% of oil shale used globally is extracted in Estonia, mainly because Estonia uses several oil-shale-fired power plants,^[52][54] which has an installed capacity of 2,967 megawatts (MW). By comparison, China's oil shale power plants have an installed capacity of 12 MW, and Germany's have 9.9 MW.^[28][55] A 470 MW oil shale power plant in Jordan is under construction as of 2020.^[56] Israel, Romania and Russia have in the past run power plants fired by oil shale but have shut them down or switched to other fuel sources such as natural gas.^[9][28][57] Other countries, such as Egypt, have had plans to construct power plants fired by oil shale, while Canada and Turkey had plans to burn oil shale along with coal for power generation.^[28][58] Oil shale serves as the main fuel for power generation only in Estonia, where 90.3% of country's electrical generation in 2016 was produced from oil shale.^[59]

According to the World Energy Council, in 2008 the total production of shale oil from oil shale was 930,000 tonnes, equal to 17,700 barrels per day (2,810 m³/d), of which China produced 375,000 tonnes, Estonia 355,000 tonnes, and Brazil 200,000 tonnes.^[60] In comparison, production of the conventional oil and natural gas liquids in 2008 amounted 3.95 billion tonnes or 82.1 million barrels per day (13.1×10^⁶ m³/d).^[61]

Extraction and processing

Main article: Shale oil extraction

 

Overview of shale oil extraction

 

Mining of oil shale. VKG Ojamaa.

Most exploitation of oil shale involves mining followed by shipping elsewhere, after which the shale is burned directly to generate electricity or undertakes further processing. The most common methods of mining involve open-pit mining and strip mining. These procedures remove most of the overlying material to expose the deposits of oil shale and become practical when the deposits occur near the surface. Underground mining of oil shale, which removes less of the overlying material, employs the room-and-pillar method.^[62]

The extraction of the useful components of oil shale usually takes place above ground (ex-situ processing), although several newer technologies perform this underground (on-site or in-situ processing).^[63] In either case, the chemical process of pyrolysis converts the kerogen in the oil shale to shale oil (synthetic crude oil) and oil shale gas. Most conversion technologies involve heating shale in the absence of oxygen to a temperature at which kerogen decomposes (pyrolyses) into gas, condensable oil, and a solid residue. This usually takes place between 450 °C (842 °F) and 500 °C (932 °F).^[10] The process of decomposition begins at relatively low temperatures (300 °C or 572 °F) but proceeds more rapidly and more completely at higher temperatures.^[64]

In-situ processing involves heating the oil shale underground. Such technologies can potentially extract more oil from a given area of land than ex-situ processes, since they can access the material at greater depths than surface mines can. Several companies have patented methods for in-situ retorting. However, most of these methods remain in the experimental phase. Two in-situ processes could be used: true in-situ processing does not involve mining the oil shale, while modified in-situ processing involves removing part of the oil shale and bringing it to the surface for modified in-situ retorting in order to create permeability for gas flow in a rubble chimney. Explosives rubblize the oil-shale deposit.^[65]

Hundreds of patents for oil shale retorting technologies exist;^[66] however, only a few dozen have undergone testing. By 2006, only four technologies remained in commercial use: Kiviter, Galoter, Fushun, and Petrosix.^[67]

Applications and products

Oil shale is utilized as a fuel for thermal power-plants, burning it (like coal) to drive steam turbines; some of these plants employ the resulting heat for district heating of homes and businesses. In addition to its use as a fuel, oil shale may also serve in the production of specialty carbon fibers, adsorbent carbons, carbon black, phenols, resins, glues, tanning agents, mastic, road bitumen, cement, bricks, construction and decorative blocks, soil-additives, fertilizers, rock-wool insulation, glass, and pharmaceutical products.^[52] However, oil shale use for production of these items remains small or only in experimental development.^[1][68] Some oil shales yield sulfur, ammonia, alumina, soda ash, uranium, and nahcolite as shale-oil extraction byproducts. Between 1946 and 1952, a marine type of Dictyonema shale served for uranium production in Sillamäe, Estonia, and between 1950 and 1989 Sweden used alum shale for the same purposes.^[1] Oil shale gas has served as a substitute for natural gas, but as of 2009^[update], producing oil shale gas as a natural-gas substitute remained economically infeasible.^[69][70]

The shale oil derived from oil shale does not directly substitute for crude oil in all applications. It may contain higher concentrations of olefins, oxygen, and nitrogen than conventional crude oil.^[49] Some shale oils may have higher sulfur or arsenic content. By comparison with West Texas Intermediate, the benchmark standard for crude oil in the futures-contract market, the Green River shale oil sulfur content ranges from near 0% to 4.9% (in average 0.76%), where West Texas Intermediate's sulfur content has a maximum of 0.42%.^[71] The sulfur content in shale oil from Jordan's oil shales may be as high as 9.5%.^[72] The arsenic content, for example, becomes an issue for Green River formation oil shale. The higher concentrations of these materials means that the oil must undergo considerable upgrading (hydrotreating) before serving as oil-refinery feedstock.^[73] Above-ground retorting processes tended to yield a lower API gravity shale oil than the in situ processes. Shale oil serves best for producing middle-distillates such as kerosene, jet fuel, and diesel fuel. Worldwide demand for these middle distillates, particularly for diesel fuels, increased rapidly in the 1990s and 2000s.^[49][74] However, appropriate refining processes equivalent to hydrocracking can transform shale oil into a lighter-range hydrocarbon (gasoline).^[49]

Economics

 

360° panoramic view of a Enefit280 plant in Estonia, that processes 280 tonnes of oil shale in an hour

Main article: Oil shale economics

The various attempts to develop oil shale deposits have succeeded only when the cost of shale-oil production in a given region comes in below the price of crude oil or its other substitutes (break-even price). According to a 2005 survey, conducted by the RAND Corporation, the cost of producing a barrel of oil at a surface retorting complex in the United States (comprising a mine, retorting plant, upgrading plant, supporting utilities, and spent shale reclamation), would range between US$70–95 ($440–600/m³, adjusted to 2005 values). This estimate considers varying levels of kerogen quality and extraction efficiency. In order to run a profitable operation, the price of crude oil would need to remain above these levels. The analysis also discussed the expectation that processing costs would drop after the establishment of the complex. The hypothetical unit would see a cost reduction of 35–70% after producing its first 500 million barrels (79 million cubic metres). Assuming an increase in output of 25 thousand barrels per day (4.0×10^³ m³/d) during each year after the start of commercial production, RAND predicted the costs would decline to $35–48 per barrel ($220–300/m³) within 12 years. After achieving the milestone of 1 billion barrels (160 million cubic metres), its costs would decline further to $30–40 per barrel ($190–250/m³).^[52][62] In 2010, the International Energy Agency estimated, based on the various pilot projects, that investment and operating costs would be similar to those of Canadian oil sands, that means would be economic at prices above $60 per barrel at current costs. This figure does not account carbon pricing, which will add additional cost.^[27] According to the New Policies Scenario introduced in its World Energy Outlook 2010, a price of $50 per tonne of emitted CO₂ adds additional $7.50 cost per barrel of shale oil.^[27] As of November 2021, the price of tonne of CO₂ exceeded $60.

A 1972 publication in the journal Pétrole Informations (ISSN 0755-561X) compared shale-based oil production unfavorably with coal liquefaction. The article portrayed coal liquefaction as less expensive, generating more oil, and creating fewer environmental impacts than extraction from oil shale. It cited a conversion ratio of 650 liters (170 U.S. gal; 140 imp gal) of oil per one ton of coal, as against 150 liters (40 U.S. gal; 33 imp gal) of shale oil per one ton of oil shale.^[41]

A critical measure of the viability of oil shale as an energy source lies in the ratio of the energy produced by the shale to the energy used in its mining and processing, a ratio known as "energy return on investment" (EROI). A 1984 study estimated the EROI of the various known oil-shale deposits as varying between 0.7–13.3,^[75] although known oil-shale extraction development projects assert an EROI between 3 and 10. According to the World Energy Outlook 2010, the EROI of ex-situ processing is typically 4 to 5 while of in-situ processing it may be even as low as 2. However, according to the IEA most of used energy can be provided by burning the spent shale or oil-shale gas.^[27] To increase efficiency when retorting oil shale, researchers have proposed and tested several co-pyrolysis processes.^[76][77][78]

Environmental considerations

Main article: Environmental impact of the oil shale industry

Mining oil shale involves numerous environmental impacts, more pronounced in surface mining than in underground mining.^[79] These include acid drainage induced by the sudden rapid exposure and subsequent oxidation of formerly buried materials; the introduction of metals including mercury^[80] into surface-water and groundwater; increased erosion, sulfur-gas emissions; and air pollution caused by the production of particulates during processing, transport, and support activities.^[11][12]

Oil-shale extraction can damage the biological and recreational value of land and the ecosystem in the mining area. Combustion and thermal processing generate waste material. In addition, the atmospheric emissions from oil shale processing and combustion include carbon dioxide, a greenhouse gas. Environmentalists oppose production and usage of oil shale, as it creates even more greenhouse gases than conventional fossil fuels.^[81] Experimental in situ conversion processes and carbon capture and storage technologies may reduce some of these concerns in the future, but at the same time they may cause other problems, including groundwater pollution.^[82] Among the water contaminants commonly associated with oil shale processing are oxygen and nitrogen heterocyclic hydrocarbons. Commonly detected examples include quinoline derivatives, pyridine, and various alkyl homologues of pyridine, such as picoline and lutidine.^[83]

Water concerns are sensitive issues in arid regions, such as the western U.S. and Israel's Negev Desert, where plans exist to expand oil-shale extraction despite a water shortage.^[84] Depending on technology, above-ground retorting uses between one and five barrels of water per barrel of produced shale-oil.^{[62][85][86][87]} A 2008 programmatic environmental impact statement issued by the U.S. Bureau of Land Management stated that surface mining and retort operations produce 2 to 10 U.S. gallons (7.6 to 37.9 L; 1.7 to 8.3 imp gal) of waste water per 1 short ton (0.91 t) of processed oil shale.^[85] In situ processing, according to one estimate, uses about one-tenth as much water.^[88]

Environmental activists, including members of Greenpeace, have organized strong protests against the oil shale industry. In one result, Queensland Energy Resources put the proposed Stuart Oil Shale Project in Australia on hold in 2004.^[11][89]

Extraterrestrial oil shale

Some comets contain massive amounts of an organic material almost identical to high grade oil shale, the equivalent of cubic kilometers of such mixed with other material;^[90] for instance, corresponding hydrocarbons were detected in a probe fly-by through the tail of Halley's Comet in 1986.^[91]

See also

•  Energy portal
•  Earth sciences portal

• Core Research Center – U.S. Geological Survey facility in Colorado – a United States Geological Survey facility dedicated to preserving valuable rock-samples threatened with disposal or destruction – including oil shales
• Kukersite – Light-brown marine type oil shale of Ordovician age – a well-analyzed marine oil shale found in the Baltic Sea basin
• Mitigation of peak oil – Gradual reduction of the use and production of fossil fuelsPages displaying short descriptions of redirect targets – discussion of attempts to delay and minimize the impact of "peak oil" (the point in time of maximum global petroleum production), including the development of unconventional oil resources
• Oil reserves – Industry concept of crude oil and natural gas reserves and resourcesPages displaying short descriptions of redirect targets – discussion of global crude-oil supplies
• Oil sands – Type of unconventional oil deposit
• Tasmanite – Sedimentary rock – a marine oil shale found in Tasmania
• Torbanite – Type of fine-grained black oil shale – a lacustrine oil shale found in Scotland
• World energy consumption – Global production and usage of energyPages displaying short descriptions of redirect targets
• Spent shale
• Les Télots Mine

References

1. Dyni, John R. (2006). "Geology and resources of some world oil shale deposits" (PDF). Scientific Investigations Report 2005–5294. Scientific Investigations Report. United States Department of the Interior, United States Geological Survey. doi:10.3133/sir29955294. Retrieved 9 July 2007.
2. Hutton, A.C. (1987). "Petrographic classification of oil shales". International Journal of Coal Geology. 8 (3). Amsterdam: Elsevier: 203–231. doi:10.1016/0166-5162(87)90032-2. ISSN 0166-5162.
3. WEC (2013), p. 2.46
4. IEA (2013), p. 424
5. Reinsalu, Enno; Aarna, Indrek (2015). "About technical terms of oil shale and shale oil" (PDF). Oil Shale. A Scientific-Technical Journal. 32 (4): 291–292. doi:10.3176/oil.2015.4.01. ISSN 0208-189X. Retrieved 16 January 2016.
6. WEC (2016), p. 16
7. (PDF) (Report). Estonian Foreign Policy Institute. September 2006. Archived from the original (PDF) on 8 January 2012. Retrieved 20 October 2007.
8. "Oil Shale and Other Unconventional Fuels Activities". United States Department of Energy. Retrieved 9 February 2014.
9. Dyni (2010), pp. 103–122
10. Youngquist, Walter (1998). "Shale Oil – The Elusive Energy" (PDF). Hubbert Center Newsletter (4). Colorado School of Mines. Retrieved 17 April 2008.
11. Burnham, A. K. (20 August 2003). (PDF). Lawrence Livermore National Laboratory. UCRL-ID-155045. Archived from the original (PDF) on 16 February 2017. Retrieved 28 June 2007.
12. "Environmental Impacts from Mining" (PDF). The Abandoned Mine Site Characterization and Cleanup Handbook. United States Environmental Protection Agency. August 2000. pp. 3/1–3/11. Retrieved 21 June 2010.
13. Ots, Arvo (12 February 2007). (PDF). Energetika. 53 (2). Lithuanian Academy of Sciences Publishers: 8–18. Archived from the original (PDF) on 29 October 2016. Retrieved 6 May 2011.
14. EIA (2006), p. 53
15. Altun, N. E.; Hiçyilmaz, C.; Hwang, J.-Y.; Suat Bağci, A.; Kök, M. V. (2006). "Oil shales in the world and Turkey; reserves, current situation and future prospects: a review" (PDF). Oil Shale. A Scientific-Technical Journal. 23 (3). Estonian Academy Publishers: 211–227. doi:10.3176/oil.2006.3.02. ISSN 0208-189X. S2CID 53395288. Retrieved 16 June 2007.
16. Hutton, Adrian C. (1994). (PDF). Energeia. 5 (5). University of Kentucky. Archived from the original (PDF) on 4 October 2013. Retrieved 19 December 2012.
17. Urov, K.; Sumberg, A. (1999). "Characteristics of oil shales and shale-like rocks of known deposits and outcrops" (PDF). Oil Shale. A Scientific-Technical Journal. 16 (3 Special). Estonian Academy Publishers: 1–64. doi:10.3176/oil.1999.3S. ISBN 978-9985-50-274-7. ISSN 0208-189X. S2CID 252572686. Retrieved 22 September 2012.
18. Lee (1990), p. 10
19. Nield, Ted (17 February 2007). "Shale of the century?". Geoscientist. 17 (2). Geological Society of London. Retrieved 4 February 2018.
20. O'Neil, William D. (11 June 2001). Oil as a strategic factor. The supply of oil in the first half of the 21st century, and its strategic implications for the U.S. (PDF) (Report). CNA Corporation. pp. 94–95. Retrieved 19 April 2008.
21. Ferriday, Tim; Montenari, Michael (2016). "Chemostratigraphy and Chemofacies of Source Rock Analogues: A High-Resolution Analysis of Black Shale Successions from the Lower Silurian Formigoso Formation (Cantabrian Mountains, NW Spain)". Stratigraphy & Timescales. 1: 123–255. doi:10.1016/bs.sats.2016.10.004 – via Elsevier Science Direct.
22. Cane, R.F. (1976). "The origin and formation of oil shale". In Teh Fu Yen; Chilingar, George V. (eds.). Oil Shale. Amsterdam: Elsevier. pp. 1–12, 56. ISBN 978-0-444-41408-3. Retrieved 5 June 2009.
23. Dyni (2010), p. 94
24. van Krevelen (1993), p. ?
25. Alali, Jamal (7 November 2006). (PDF). International Oil Shale Conference. Amman, Jordan. Archived from the original (PDF) on 27 May 2008. Retrieved 4 March 2008.
26. Dyni (2010), p. 95
27. IEA (2010), pp. 165–169
28. Brendow, K. (2003). "Global oil shale issues and perspectives. Synthesis of the Symposium on Oil Shale. 18–19 November, Tallinn" (PDF). Oil Shale. A Scientific-Technical Journal. 20 (1). Estonian Academy Publishers: 81–92. doi:10.3176/oil.2003.1.09. ISSN 0208-189X. S2CID 252652047. Retrieved 21 July 2007.
29. Qian, Jialin; Wang, Jianqiu; Li, Shuyuan (2003). "Oil Shale Development in China" (PDF). Oil Shale. A Scientific-Technical Journal. 20 (3). Estonian Academy Publishers: 356–359. doi:10.3176/oil.2003.3S.08. ISSN 0208-189X. S2CID 130553387. Retrieved 16 June 2007.
30. WEC (2016), p. 14
31. . Argonne National Laboratory. Archived from the original on 13 October 2007. Retrieved 20 October 2007.
32. Allix, Pierre; Burnham, Alan K. (1 December 2010). . Oilfield Review. 22 (4). Schlumberger: 6. Archived from the original (PDF) on 6 January 2015. Retrieved 18 April 2012.
33. Non-synfuel uses of oil shale. Oil shale symposium. Golden, CO: United States Department of Energy. 21 April 1987. OSTI 6567632.
34. Moody, Richard (20 April 2007). UK Oil and Gas Shales—Definitions and Distribution in Time and Space. History of On-Shore Hydrocarbon Use in the UK. Weymouth: Geological Society of London. pp. 1–2. Retrieved 6 September 2014.
35. Cadell, Henry M (1925). The Rocks of West Lothian. An Account of the Geological and Mining History of the West Lothian District (1st ed.). Edinburgh: Oliver and Boyd. p. 390.
36. West, Ian (6 January 2008). "Kimmeridge – The Blackstone – Oil Shale". University of Southampton. Retrieved 9 February 2014.
37. Forbes, Robert James (1970). A Short History of the Art of Distillation from the Beginnings Up to the Death of Cellier Blumenthal. Brill Publishers. pp. 41–42. ISBN 978-90-04-00617-1.
38. Mushrush (1995), p. 39
39. Cane (1976), p. 56
40. Dyni (2010), p. 96
41. Laherrère, Jean (2005). (PDF). Hubbert Peak. Archived from the original (PDF) on 28 September 2007. Retrieved 17 June 2007.
42. Doscher, Todd M. . MSN Encarta. Archived from the original on 21 April 2008. Retrieved 22 April 2008.
43. "Oil Shale Committee-EMD". American Association of Petroleum Geologists. Retrieved 4 February 2018.
44. Cadell, Henry (1901). "The geology of the oil-shale fields of the Lothians". Transactions of the Edinburgh Geological Society. 8: 116–163. doi:10.1144/transed.8.1.116. S2CID 176768495.
45. . Museum of the Scottish Shale Oil Industry. Archived from the original on 25 September 2019. Retrieved 7 July 2012.
46. Dyni (2010), p. 97
47. Yin, Liang (7 November 2006). (PDF). International Oil Shale Conference. Amman, Jordan. Archived from the original (PDF) on 28 September 2007. Retrieved 29 June 2007.
48. Collier, Robert (4 September 2006). "Coaxing oil from huge U.S. shale deposits". San Francisco Chronicle. Retrieved 19 December 2012.
49. Andrews, Anthony (13 April 2006). Oil Shale: History, Incentives, and Policy (PDF) (Report). Congressional Research Service. Retrieved 25 June 2007.
50. (Press release). Bureau of Land Management. 20 September 2005. Archived from the original on 16 September 2008. Retrieved 10 July 2007.
51. . Oil Shale and Tar Sands Leasing Programmatic EIS Information Center. Archived from the original on 3 July 2007. Retrieved 10 July 2007.
52. Francu, Juraj; Harvie, Barbra; Laenen, Ben; Siirde, Andres; Veiderma, Mihkel (May 2007). (PDF) (Report). European Academies Science Advisory Council. pp. 12–13, 18–19, 23–24, 28. Archived from the original (PDF) on 26 July 2011. Retrieved 21 June 2010.
53. Alali, Jamal; Abu Salah, Abdelfattah; Yasin, Suha M.; Al Omari, Wasfi (2006). Oil Shale in Jordan (PDF) (Report). Natural Resources Authority of Jordan. Retrieved 11 June 2017.
54. . Estonian Ministry of Economic Affairs and Communications. 8 June 2009. Archived from the original on 16 July 2011. Retrieved 2 September 2009.
55. Qian, Jialin; Wang, Jianqiu; Li, Shuyuan (15 October 2007). One Year's Progress in the Chinese Oil Shale Business (PDF). 27th Oil Shale Symposium. Golden, Colorado: China University of Petroleum. Retrieved 6 May 2011.
56. Al-Khalidi, Suleiman (16 March 2017). "Jordan moves ahead with $2.1 bln oil shale power plant". Reuters. Retrieved 23 October 2020.
57. Azulai, Yuval (22 March 2011). "We are not drying up the Dead Sea". Globes. Retrieved 9 February 2014.
58. Hamarneh, Yousef; Alali, Jamal; Sawaged, Suzan (1998). Oil Shale Resources Development In Jordan (Report). Amman: Natural Resources Authority of Jordan.
59. Beger, Mariliis, ed. (2017). Estonian Oil Shale Industry. Yearbook 2016 (PDF). Eesti Energia, VKG, KKT, Tallinn University of Technology. p. 18. Retrieved 29 January 2018.
60. Dyni (2010), pp. 101–102
61. Dyni (2010), pp. 59–61
62. Bartis, James T.; LaTourrette, Tom; Dixon, Lloyd; Peterson, D.J.; Cecchine, Gary (2005). Oil Shale Development in the United States. Prospects and Policy Issues. Prepared for the National Energy Technology Laboratory of the U.S. Department of Energy (PDF). RAND Corporation. ISBN 978-0-8330-3848-7. Retrieved 29 June 2007.
63. Burnham, Alan K.; McConaghy, James R. (16 October 2006). (PDF). 26th Oil Shale Symposium. Golden, Colorado: Lawrence Livermore National Laboratory. UCRL-CONF-226717. Archived from the original (PDF) on 13 February 2016. Retrieved 23 June 2007.
64. Koel, Mihkel (1999). "Estonian oil shale". Oil Shale. A Scientific-Technical Journal (Extra). Estonian Academy Publishers. ISSN 0208-189X. Retrieved 21 July 2007.
65. Johnson, Harry R.; Crawford, Peter M.; Bunger, James W. (March 2004). (PDF) (Report). United States Department of Energy. Archived from the original (PDF) on 13 November 2018. Retrieved 24 September 2017.
66. "Process for the recovery of hydrocarbons from oil shale". FreePatentsOnline. Retrieved 3 November 2007.
67. Qian, Jialin; Wang, Jianqiu (7 November 2006). (PDF). International Conference on Oil Shale: Recent Trends In Oil Shale. Amman, Jordan. Archived from the original (PDF) on 27 May 2008. Retrieved 29 June 2007.
68. Dyni (2010), p. 98
69. Schora, F. C.; Tarman, P. B.; Feldkirchner, H. L.; Weil, S. A. (1976). "Hydrocarbon fuels from oil shale". Proceedings. 1. American Institute of Chemical Engineers: 325–330. Bibcode:1976iece.conf..325S. A77-12662 02-44.
70. Valgma, Ingo. . Mining Institute of Tallinn Technical University. Archived from the original on 17 August 2014. Retrieved 21 July 2007.
71. Dyni, John R. (1 April 1983). "Distribution and origin of sulfur in Colorado oil shale". 16th Oil Shale Symposium Proceedings. U.S. Geological Survey: 144–159. OSTI 5232531. CONF-830434-.
72. Al-Harahsheh, Adnan; Al-Otoom, Awni Y.; Shawabkeh, Reyad A. (16 October 2003). "Sulfur distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil Shale". Energy. 30 (15) (published November 2005): 2784–2795. doi:10.1016/j.energy.2005.01.013.
73. Lee (1990), p. 6
74. "Statement Of Daniel Yergin, Chairman of Cambridge Energy Research Associates, Before The Committee On Energy And Commerce/U.S. House Of Representatives". United States House of Representatives. 4 May 2006. Retrieved 19 December 2012.
75. Cleveland, Cutler J.; Costanza, Robert; Hall, Charles A. S.; Kaufmann, Robert (31 August 1984). "Energy and the U.S. Economy: A Biophysical Perspective". Science. 225 (4665). American Association for the Advancement of Science: 890–897. Bibcode:1984Sci...225..890C. doi:10.1126/science.225.4665.890. ISSN 0036-8075. PMID 17779848. S2CID 2875906.
76. Tiikma, Laine; Johannes, Ille; Luik, Hans (March 2006). "Fixation of chlorine evolved in pyrolysis of PVC waste by Estonian oil shales". Journal of Analytical and Applied Pyrolysis. 75 (2): 205–210. doi:10.1016/j.jaap.2005.06.001.
77. Veski, R.; Palu, V.; Kruusement, K. (2006). "Co-liquefaction of kukersite oil shale and pine wood in supercritical water" (PDF). Oil Shale. A Scientific-Technical Journal. 23 (3). Estonian Academy Publishers: 236–248. doi:10.3176/oil.2006.3.04. ISSN 0208-189X. S2CID 59478829. Retrieved 16 June 2007.
78. Aboulkas, A.; El Harfi, K.; El Bouadili, A.; Benchanaa, M.; Mokhlisse, A.; Outzourit, A. (2007). "Kinetics of co-pyrolysis of Tarfaya (Morocco) oil shale with high-density polyethylene" (PDF). Oil Shale. A Scientific-Technical Journal. 24 (1). Estonian Academy Publishers: 15–33. doi:10.3176/oil.2007.1.04. ISSN 0208-189X. S2CID 55932225. Retrieved 16 June 2007.
79. Mittal, Anu K. (10 May 2012). "Unconventional Oil and Gas Production. Opportunities and Challenges of Oil Shale Development" (PDF). Government Accountability Office. Retrieved 22 December 2012.
80. Western Oil Shale Has a High Mercury Content http://www.westernresearch.org/uploadedFiles/Energy_and_Environmental_Technology/Unconventional_Fuels/Oil_Shale/MercuryinOilShale.pdf 19 July 2011 at the Wayback Machine
81. Driving It Home. Choosing the Right Path for Fueling North America's Transportation Future (PDF) (Report). Natural Resources Defense Council. June 2007. Retrieved 19 April 2008.
82. Bartis, Jim (26 October 2006). (PDF). World Oil Conference. Association for the Study of Peak Oil & Gas – USA. Archived from the original (PDF) on 21 July 2011. Retrieved 28 June 2007.
83. Sims, G. K. and E.J. O'Loughlin. 1989. Degradation of pyridines in the environment. CRC Critical Reviews in Environmental Control. 19(4): 309–340.
84. Speckman, Stephen (22 March 2008). . Deseret Morning News. Archived from the original on 16 November 2010. Retrieved 6 May 2011.
85. (PDF). Proposed Oil Shale and Tar Sands Resource Management Plan Amendments to Address Land Use Allocations in Colorado, Utah, and Wyoming and Final Programmatic Environmental Impact Statement. Bureau of Land Management. September 2008. pp. 4‑3. FES 08-32. Archived from the original (PDF) on 27 May 2010. Retrieved 7 August 2010.
86. . U.S. Water News Online. July 2007. Archived from the original on 18 June 2008. Retrieved 1 April 2008.
87. Al-Ayed, Omar (2008). . Al-Balqa` Applied University. Archived from the original on 3 June 2008. Retrieved 15 August 2008.
88. Fischer, Perry A. (August 2005). . World Oil Magazine. Gulf Publishing Company. Archived from the original on 9 November 2006. Retrieved 1 April 2008.
89. "Greenpeace happy with part closure of shale oil plant". Australian Broadcasting Corporation. 22 July 2004. Retrieved 19 May 2008.
90. Dr. A. Zuppero, U.S. Department of Energy, Idaho National Engineering Laboratory. Discovery Of Water Ice Nearly Everywhere In The Solar System
91. Huebner, Walter F., ed. (1990). Physics and Chemistry of Comets. Springer-Verlag. ISBN 978-3-642-74805-9.

Bibliography

• Cane, R.F. (1976). "The origin and formation of oil shale". In Teh Fu Yen; Chilingar, George V. (eds.). Oil Shale. Amsterdam: Elsevier. pp. 1–12, 56. ISBN 978-0-444-41408-3.
• Dyni, John R. (2010). "Oil Shale". In Clarke, Alan W.; Trinnaman, Judy A. (eds.). Survey of energy resources (PDF) (22 ed.). World Energy Council. ISBN 978-0-946121-02-1. (PDF) from the original on 4 March 2012.
• "Unconventional oil". World Energy Resources 2013 Survey (PDF). 2013. p. 2.46. ISBN 9780946121298. (PDF) from the original on 21 February 2014. {{cite book}}: |work= ignored (help)
• Annual Energy Outlook 2006 (PDF). Energy Information Administration. February 2006.
• World Energy Outlook 2010. Paris: OECD. 2010. ISBN 978-92-64-08624-1. {{cite book}}: |work= ignored (help)
• World Energy Outlook 2013. OECD. 2013. ISBN 978-92-64-20130-9. {{cite book}}: |work= ignored (help)
• Lee, Sunggyu (1991). Oil Shale Technology. CRC Press. ISBN 978-0-8493-4615-6.
• Mushrush, George (1995). Petroleum Products: Instability And Incompatibility. Applied energy technology. CRC Press. ISBN 9781560322979.
• van Krevelen, Dirk Willem (1993). Coal--typology, physics, chemistry, constitution. Coal Science and Technology Series (3 ed.). Elsevier. ISBN 978-0-444-89586-8.
• World energy resources. Oil 2016 (PDF). World Energy Council. 2016. ISBN 978-0-946121-62-5.

External links

Listen to this article (29 minutes)

 

This audio file was created from a revision of this article dated 26 May 2008 (2008-05-26), and does not reflect subsequent edits.

(Audio help · More spoken articles)

 

Wikimedia Commons has media related to Oil shale.

 

Wikisource has the text of the 1905 New International Encyclopedia article "Bituminous Shales".

• "Oil Shale. A Scientific-Technical Journal". Bulletin des Sciences. Estonian Academy Publishers. ISSN 0208-189X. Retrieved 22 April 2008.