Pyrite

Not to be confused with Synthetic gold.

"Fool's Gold" redirects here. For other uses, see Fool's Gold (disambiguation).

This article is about iron pyrite. For other pyrite minerals, see Pyrite group.

The mineral pyrite (/ˈpaɪraɪt/ PY-ryte),^[6] or iron pyrite, also known as fool's gold, is an iron sulfide with the chemical formula FeS₂ (iron (II) disulfide). Pyrite is the most abundant sulfide mineral.^[7]

Pyrite
Intergrowth of lustrous, cubic crystals of pyrite, with some surfaces showing characteristic striations, from Huanzala mine, Ancash, Peru. Specimen size: 7.0 × 5.0 × 2.5 cm
General
Category	Sulfide mineral
Formula (repeating unit)	FeS2
IMA symbol	Py^[1]
Strunz classification	2.EB.05a
Dana classification	2.12.1.1
Crystal system	Cubic
Crystal class	Diploidal (m3) H-M symbol: (2/m 3)
Space group	Pa3
Unit cell	a = 5.417 Å, Z = 4
Identification
Formula mass	119.98 g/mol
Color	Pale brass-yellow reflective; tarnishes darker and iridescent
Crystal habit	Cubic, faces may be striated, but also frequently octahedral and pyritohedral. Often inter-grown, massive, radiated, granular, globular, and stalactitic.
Twinning	Penetration and contact twinning
Cleavage	Indistinct on {001}; partings on {011} and {111}
Fracture	Very uneven, sometimes conchoidal
Tenacity	Brittle
Mohs scale hardness	6–6.5
Luster	Metallic, glistening
Streak	Greenish-black to brownish-black
Diaphaneity	Opaque
Specific gravity	4.95–5.10
Density	4.8–5 g/cm^3
Fusibility	2.5–3 to a magnetic globule
Solubility	Insoluble in water
Other characteristics	paramagnetic
References	^[2]^[3]^[4]^[5]

Pyrite cubic crystals on marl from Navajún, La Rioja, Spain (size: 95 by 78 millimetres [3.7 by 3.1 in], 512 grams [18.1 oz]; main crystal: 31 millimetres [1.2 in] on edge)

Pyrite's metallic luster and pale brass-yellow hue give it a superficial resemblance to gold, hence the well-known nickname of fool's gold. The color has also led to the nicknames brass, brazzle, and brazil, primarily used to refer to pyrite found in coal.^[8][9]

The name pyrite is derived from the Greek πυρίτης λίθος (pyritēs lithos), 'stone or mineral which strikes fire',^[10] in turn from πῦρ (pyr), 'fire'.^[11] In ancient Roman times, this name was applied to several types of stone that would create sparks when struck against steel; Pliny the Elder described one of them as being brassy, almost certainly a reference to what is now called pyrite.^[12]

By Georgius Agricola's time, c. 1550, the term had become a generic term for all of the sulfide minerals.^[13]

Pyrite under normal and polarized light

Pyrite is usually found associated with other sulfides or oxides in quartz veins, sedimentary rock, and metamorphic rock, as well as in coal beds and as a replacement mineral in fossils, but has also been identified in the sclerites of scaly-foot gastropods.^[14] Despite being nicknamed "fool's gold", pyrite is sometimes found in association with small quantities of gold. A substantial proportion of the gold is "invisible gold" incorporated into the pyrite (see Carlin-type gold deposit). It has been suggested that the presence of both gold and arsenic is a case of coupled substitution but as of 1997 the chemical state of the gold remained controversial.^[15]

Uses

 

An abandoned pyrite mine near Pernek in Slovakia

Pyrite enjoyed brief popularity in the 16th and 17th centuries as a source of ignition in early firearms, most notably the wheellock, where a sample of pyrite was placed against a circular file to strike the sparks needed to fire the gun.^[16]

Pyrite is used with flintstone and a form of tinder made of stringybark by the Kaurna people, people of South Australia, as a traditional method of starting fires.^[17]

Pyrite has been used since classical times to manufacture copperas (ferrous sulfate). Iron pyrite was heaped up and allowed to weather (an example of an early form of heap leaching). The acidic runoff from the heap was then boiled with iron to produce iron sulfate. In the 15th century, new methods of such leaching began to replace the burning of sulfur as a source of sulfuric acid. By the 19th century, it had become the dominant method.^[18]

Pyrite remains in commercial use for the production of sulfur dioxide, for use in such applications as the paper industry, and in the manufacture of sulfuric acid. Thermal decomposition of pyrite into FeS (iron(II) sulfide) and elemental sulfur starts at 540 °C (1,004 °F); at around 700 °C (1,292 °F), p_S2 is about 1 atm.^[19]

A newer commercial use for pyrite is as the cathode material in Energizer brand non-rechargeable lithium metal batteries.^[20]

Pyrite is a semiconductor material with a band gap of 0.95 eV.^[21] Pure pyrite is naturally n-type, in both crystal and thin-film forms, potentially due to sulfur vacancies in the pyrite crystal structure acting as n-dopants.^[22]

During the early years of the 20th century, pyrite was used as a mineral detector in radio receivers, and is still used by crystal radio hobbyists. Until the vacuum tube matured, the crystal detector was the most sensitive and dependable detector available—with considerable variation between mineral types and even individual samples within a particular type of mineral. Pyrite detectors occupied a midway point between galena detectors and the more mechanically complicated perikon mineral pairs. Pyrite detectors can be as sensitive as a modern 1N34A germanium diode detector.^[23][24]

Pyrite has been proposed as an abundant, non-toxic, inexpensive material in low-cost photovoltaic solar panels.^[25] Synthetic iron sulfide was used with copper sulfide to create the photovoltaic material.^[26] More recent efforts are working toward thin-film solar cells made entirely of pyrite.^[22]

Pyrite is used to make marcasite jewelry. Marcasite jewelry, made from small faceted pieces of pyrite, often set in silver, was known since ancient times and was popular in the Victorian era.^[27] At the time when the term became common in jewelry making, "marcasite" referred to all iron sulfides including pyrite, and not to the orthorhombic FeS₂ mineral marcasite which is lighter in color, brittle and chemically unstable, and thus not suitable for jewelry making. Marcasite jewelry does not actually contain the mineral marcasite. The specimens of pyrite, when it appears as good quality crystals, are used in decoration. They are also very popular in mineral collecting. Among the sites that provide the best specimens are Soria and La Rioja provinces (Spain).^[28]

In value terms, China ($47 million) constitutes the largest market for imported unroasted iron pyrites worldwide, making up 65% of global imports. China is also the fastest growing in terms of the unroasted iron pyrites imports, with a CAGR of +27.8% from 2007 to 2016.^[29]

Research

In July 2020 scientists reported that they have observed a voltage-induced transformation of normally diamagnetic pyrite into a ferromagnetic material, which may lead to applications in devices such as solar cells or magnetic data storage.^[30][31]

Researchers at Trinity College Dublin, Ireland have demonstrated that FeS₂ can be exfoliated into few-layers just like other two-dimensional layered materials such as graphene by a simple liquid-phase exfoliation route. This is the first study to demonstrate the production of non-layered 2D-platelets from 3D bulk FeS₂. Furthermore, they have used these 2D-platelets with 20% single walled carbon-nanotube as an anode material in lithium-ion batteries, reaching a capacity of 1000 mAh/g close to the theoretical capacity of FeS₂.^[32]

In 2021, a natural pyrite stone has been crushed and pre-treated followed by liquid-phase exfoliation into two-dimensional nanosheets, which has shown capacities of 1200 mAh/g as an anode in lithium-ion batteries.^[33]

Formal oxidation states for pyrite, marcasite, molybdenite and arsenopyrite

From the perspective of classical inorganic chemistry, which assigns formal oxidation states to each atom, pyrite and marcasite are probably best described as Fe²⁺[S₂]²⁻. This formalism recognizes that the sulfur atoms in pyrite occur in pairs with clear S–S bonds. These persulfide [^–S–S^–] units can be viewed as derived from hydrogen disulfide, H₂S₂. Thus pyrite would be more descriptively called iron persulfide, not iron disulfide. In contrast, molybdenite, MoS₂, features isolated sulfide S²⁻ centers and the oxidation state of molybdenum is Mo⁴⁺. The mineral arsenopyrite has the formula FeAsS. Whereas pyrite has [S₂]^2– units, arsenopyrite has [AsS]^3– units, formally derived from deprotonation of arsenothiol (H₂AsSH). Analysis of classical oxidation states would recommend the description of arsenopyrite as Fe³⁺[AsS]³⁻.^[34]

Crystallography

 

Crystal structure of pyrite. In the center of the cell a S₂²⁻ pair is seen in yellow

Iron-pyrite FeS₂ represents the prototype compound of the crystallographic pyrite structure. The structure is simple cubic and was among the first crystal structures solved by X-ray diffraction.^[35] It belongs to the crystallographic space group Pa3 and is denoted by the Strukturbericht notation C2. Under thermodynamic standard conditions the lattice constant ${\displaystyle a}$  of stoichiometric iron pyrite FeS₂ amounts to 541.87 pm.^[36] The unit cell is composed of a Fe face-centered cubic sublattice into which the S
₂ ions are embedded. (Note though that the iron atoms in the faces are not equivalent by translation alone to the iron atoms at the corners.) The pyrite structure is also seen in other MX₂ compounds of transition metals M and chalcogens X = O, S, Se and Te. Certain dipnictides with X standing for P, As and Sb etc. are also known to adopt the pyrite structure.^[37]

The Fe atoms are bonded to six S atoms, giving a distorted octahedron. The material is a semiconductor. The Fe ions is usually considered to be low spin divalent state (as shown by Mössbauer spectroscopy as well as XPS). The material as a whole behaves as a Van Vleck paramagnet, despite its low-spin divalency.^[38]

The sulfur centers occur in pairs, described as S₂²⁻.^[39] Reduction of pyrite with potassium gives potassium dithioferrate, KFeS₂. This material features ferric ions and isolated sulfide (S^2-) centers.

The S atoms are tetrahedral, being bonded to three Fe centers and one other S atom. The site symmetry at Fe and S positions is accounted for by point symmetry groups C_3i and C₃, respectively. The missing center of inversion at S lattice sites has important consequences for the crystallographic and physical properties of iron pyrite. These consequences derive from the crystal electric field active at the sulfur lattice site, which causes a polarization of S ions in the pyrite lattice.^[40] The polarisation can be calculated on the basis of higher-order Madelung constants and has to be included in the calculation of the lattice energy by using a generalised Born–Haber cycle. This reflects the fact that the covalent bond in the sulfur pair is inadequately accounted for by a strictly ionic treatment.^[41]

Arsenopyrite has a related structure with heteroatomic As–S pairs rather than S-S pairs. Marcasite also possesses homoatomic anion pairs, but the arrangement of the metal and diatomic anions differ from that of pyrite. Despite its name, chalcopyrite (CuFeS
₂) does not contain dianion pairs, but single S²⁻ sulfide anions.

Crystal habit

 

Pyritohedron-shaped crystals from Italy

Pyrite usually forms cuboid crystals, sometimes forming in close association to form raspberry-shaped masses called framboids. However, under certain circumstances, it can form anastomosing filaments or T-shaped crystals.^[42] Pyrite can also form shapes almost the same as a regular dodecahedron, known as pyritohedra, and this suggests an explanation for the artificial geometrical models found in Europe as early as the 5th century BC.^{[43][clarification needed]}

Varieties

Cattierite (CoS₂), vaesite (NiS₂) and hauerite (MnS₂), as well as sperrylite (PtAs₂) are similar in their structure and belong also to the pyrite group.

Bravoite is a nickel-cobalt bearing variety of pyrite, with > 50% substitution of Ni²⁺ for Fe²⁺ within pyrite. Bravoite is not a formally recognised mineral, and is named after the Peruvian scientist Jose J. Bravo (1874–1928).^[44]

Distinguishing similar minerals

Pyrite is distinguishable from native gold by its hardness, brittleness and crystal form. Pyrite fractures are very uneven, sometimes conchoidal because it does not cleave along a preferential plane. Native gold nuggets, or glitters, do not break but deform in a ductile way. Pyrite is brittle, gold is malleable.

Natural gold tends to be anhedral (irregularly shaped without well defined faces), whereas pyrite comes as either cubes or multifaceted crystals with well developed and sharp faces easy to recognise. Well crystallised pyrite crystals are euhedral (i.e., with nice faces). Pyrite can often be distinguished by the striations which, in many cases, can be seen on its surface. Chalcopyrite (CuFeS₂) is brighter yellow with a greenish hue when wet and is softer (3.5–4 on Mohs' scale).^[45] Arsenopyrite (FeAsS) is silver white and does not become more yellow when wet.

Hazards

 

A pyrite cube (center) has dissolved away from a host rock, leaving behind trace gold

Iron pyrite is unstable when exposed to the oxidizing conditions prevailing at the Earth's surface: iron pyrite in contact with atmospheric oxygen and water, or damp, ultimately decomposes into iron oxyhydroxides (ferrihydrite, FeO(OH)) and sulfuric acid (H
₂SO
₄). This process is accelerated by the action of Acidithiobacillus bacteria which oxidize pyrite to first produce ferrous ions (Fe²⁺
), sulfate ions (SO²⁻
₄), and release protons ( H⁺, or H₃O⁺). In a second step, the ferrous ions (Fe²⁺
) are oxidized by O₂ into ferric ions (Fe³⁺
) which hydrolyze also releasing  H⁺ ions and producing FeO(OH). These oxidation reactions occur more rapidly when pyrite is finely dispersed (framboidal crystals initially formed by sulfate reducing bacteria (SRB) in argillaceous sediments or dust from mining operations).

Pyrite oxidation and acid mine drainage

Main article: Acid mine drainage

Pyrite oxidation by atmospheric O₂ in the presence of moisture (H₂O) initially produces ferrous ions (Fe²⁺
) and sulfuric acid which dissociates into sulfate ions and protons, leading to acid mine drainage (AMD). An example of acid rock drainage caused by pyrite is the 2015 Gold King Mine waste water spill.

${\displaystyle {\ce {2FeS2{\scriptstyle (s)}+7O2{\scriptstyle (g)}+2H2O{\scriptstyle (l)}->2Fe^{2+}{\scriptstyle (aq)}+4SO4^{2-}{\scriptstyle (aq)}+4H+{\scriptstyle (aq)}}}}$ .^[46]

Dust explosions

Pyrite oxidation is sufficiently exothermic that underground coal mines in high-sulfur coal seams have occasionally had serious problems with spontaneous combustion.^[47] The solution is the use of buffer blasting and the use of various sealing or cladding agents to hermetically seal the mined-out areas to exclude oxygen.^[48]

In modern coal mines, limestone dust is sprayed onto the exposed coal surfaces to reduce the hazard of dust explosions. This has the secondary benefit of neutralizing the acid released by pyrite oxidation and therefore slowing the oxidation cycle described above, thus reducing the likelihood of spontaneous combustion. In the long term, however, oxidation continues, and the hydrated sulfates formed may exert crystallization pressure that can expand cracks in the rock and lead eventually to roof fall.^[49]

Weakened building materials

Main articles: Concrete degradation and Sulfate attack in concrete and mortar

Building stone containing pyrite tends to stain brown as pyrite oxidizes. This problem appears to be significantly worse if any marcasite is present.^[50] The presence of pyrite in the aggregate used to make concrete can lead to severe deterioration as pyrite oxidizes.^[51] In early 2009, problems with Chinese drywall imported into the United States after Hurricane Katrina were attributed to pyrite oxidation, followed by microbial sulfate reduction which released hydrogen sulfide gas (H₂S). These problems included a foul odor and corrosion of copper wiring.^[52] In the United States, in Canada,^[53] and more recently in Ireland,^[54][55][56] where it was used as underfloor infill, pyrite contamination has caused major structural damage. Concrete exposed to sulfate ions, or sulfuric acid, degrades by sulfate attack: the formation of expansive mineral phases, such as ettringite (small needle crystals exerting a huge crystallization pressure inside the concrete pores) and gypsum creates inner tensile forces in the concrete matrix which destroy the hardened cement paste, form cracks and fissures in concrete, and can lead to the ultimate ruin of the structure. Normalized tests for construction aggregate^[57] certify such materials as free of pyrite or marcasite.

Occurrence

Pyrite is the most common of sulfide minerals and is widespread in igneous, metamorphic, and sedimentary rocks. It is a common accessory mineral in igneous rocks, where it also occasionally occurs as larger masses arising from an immiscible sulfide phase in the original magma. It is found in metamorphic rocks as a product of contact metamorphism. It also forms as a high-temperature hydrothermal mineral, though it occasionally forms at lower temperatures.^[2]

Pyrite occurs both as a primary mineral, present in the original sediments, and as a secondary mineral, deposited during diagenesis.^[2] Pyrite and marcasite commonly occur as replacement pseudomorphs after fossils in black shale and other sedimentary rocks formed under reducing environmental conditions.^[58] Pyrite is common as an accessory mineral in shale, where it is formed by precipitation from anoxic seawater, and coal beds often contain significant pyrite.^[59]

Notable deposits are found as lenticular masses in Virginia, U.S., and in smaller quantities in many other locations. Large deposits are mined at Rio Tinto in Spain and elsewhere in the Iberian Peninsula.

Cultural beliefs

In the beliefs of the Thai people (especially the southerner), pyrite is known as Khao tok Phra Ruang, Khao khon bat Phra Ruang (ข้าวตอกพระร่วง, ข้าวก้นบาตรพระร่วง) or Phet na tang, Hin na tang (เพชรหน้าทั่ง, หินหน้าทั่ง). It is believed to be a sacred item that has the power to prevent evil, black magic or demons.^[60][61]

Images

•  
  As a replacement mineral in an ammonite from France
•  
  Pyrite from Ampliación a Victoria Mine, Navajún, La Rioja, Spain
•  
  Pyrite from the Sweet Home Mine, with golden striated cubes intergrown with minor tetrahedrite, on a bed of transparent quartz needles
•  
  Radiating form of pyrite
•  
  Paraspirifer bownockeri in pyrite
•  
  Pink fluorite perched between pyrite on one side and metallic galena on the other side
•  
  SEM image of intergrowth of pyrite cuboctahedral crystals (yellow) and pyrrhotite (pinkish yellow)

See also

• Iron–sulfur world hypothesis
• Sulfur isotope biogeochemistry

References

1. Warr, L.N. (2021). "IMA–CNMNC approved mineral symbols". Mineralogical Magazine. 85 (3): 291–320. Bibcode:2021MinM...85..291W. doi:10.1180/mgm.2021.43. S2CID 235729616.
2. Hurlbut, Cornelius S.; Klein, Cornelis (1985). Manual of Mineralogy (20th ed.). New York, NY: John Wiley and Sons. pp. 285–286. ISBN 978-0-471-80580-9.
3. "Pyrite". Webmineral.com. Retrieved 2011-05-25.
4. "Pyrite". Mindat.org. Retrieved 2011-05-25.
5. Anthony, John W.; Bideaux, Richard A.; Bladh, Kenneth W.; Nichols, Monte C., eds. (1990). "Pyrite" (PDF). Handbook of Mineralogy. Vol. I (Elements, Sulfides, Sulfosalts). Chantilly, Virginia, US: Mineralogical Society of America. ISBN 978-0962209734.
6. "Pyrite | meaning in the Cambridge English Dictionary". dictionary.cambridge.org.
7. Vernon J. Hurst; Thomas J. Crawford (1970). Sulfide Deposits in the Coosa Valley Area, Georgia. Economic Development Administration, Technical Assistance Project, U. S. Department of Commerce. p. 137.
8. Jackson, Julia A.; Mehl, James; Neuendorf, Klaus (2005). Glossary of Geology. American Geological Institute. p. 82. ISBN 9780922152766 – via Google Books.
9. Fay, Albert H. (1920). A Glossary of the Mining and Mineral Industry. United States Bureau of Mines. pp. 103–104 – via Google Books.
10. πυρίτης. Liddell, Henry George; Scott, Robert; A Greek–English Lexicon at the Perseus Project.
11. πῦρ in Liddell and Scott.
12. Dana, James Dwight; Dana, Edward Salisbury (1911). Descriptive Mineralogy (6th ed.). New York: Wiley. p. 86.
13. "De re metallica". The Mining Magazine. Translated by Hoover, H.C.; Hoover, L.H. London: Dover. 1950 [1912]. see footnote on p 112.
14. . news.nationalgeographic.com. Washington, DC: National Geographic Society. Archived from the original on November 10, 2003. Retrieved 2016-08-29.
15. Fleet, M. E.; Mumin, A. Hamid (1997). "Gold-bearing arsenian pyrite and marcasite and arsenopyrite from Carlin Trend gold deposits and laboratory synthesis" (PDF). American Mineralogist. 82 (1–2): 182–193. Bibcode:1997AmMin..82..182F. doi:10.2138/am-1997-1-220. S2CID 55899431.
16. Larson, Bruce (2003). "Firearms". An Interpretation of Firearms in the Archaeological Record in Virginia 1607-1625. Dissertations, Theses, and Masters Projects. Vol. 1. pp. 413–418.
17. Schultz, Chester (22 October 2018). "Place Name Summary 6/23: Brukangga and Tindale's uses of the word bruki" (PDF). Adelaide Research & Scholarship. University of Adelaide. Retrieved 16 November 2020.
18. "Industrial England in the Middle of the Eighteenth Century". Nature. 83 (2113): 264–268. 1910-04-28. Bibcode:1910Natur..83..264.. doi:10.1038/083264a0. hdl:2027/coo1.ark:/13960/t63497b2h. S2CID 34019869.
19. Rosenqvist, Terkel (2004). Principles of extractive metallurgy (2nd ed.). Tapir Academic Press. p. 52. ISBN 978-82-519-1922-7.
20. "Cylindrical Primary Lithium [battery]". Lithium-Iron Disulfide (Li-FeS₂) (PDF). Handbook and Application Manual. Energizer Corporation. 2017-09-19. Retrieved 2018-04-20.
21. Ellmer, K. & Tributsch, H. (2000-03-11). . Proceedings of the 12th Workshop on Quantum Solar Energy Conversion – (QUANTSOL 2000). Archived from the original on 2010-01-15.
22. Xin Zhang & Mengquin Li (2017-06-19). "Potential resolution to the doping puzzle in iron pyrite: Carrier type determination by Hall effect and thermopower". Physical Review Materials. 1 (1): 015402. Bibcode:2017PhRvM...1a5402Z. doi:10.1103/PhysRevMaterials.1.015402.
23. The Principles Underlying Radio Communication. U.S. Army Signal Corps. Radio Pamphlet. Vol. 40. 1918. section 179, pp 302–305 – via Google Books.
24. Thomas H. Lee (2004). The Design of Radio Frequency Integrated Circuits (2nd ed.). Cambridge, UK: Cambridge University Press. pp. 4–6. ISBN 9780521835398 – via Google Books.
25. Wadia, Cyrus; Alivisatos, A. Paul; Kammen, Daniel M. (2009). "Materials availability expands the opportunity for large-scale photovoltaics deployment". Environmental Science & Technology. 43 (6): 2072–7. Bibcode:2009EnST...43.2072W. doi:10.1021/es8019534. PMID 19368216. S2CID 36725835.
26. Sanders, Robert (17 February 2009). "Cheaper materials could be key to low-cost solar cells". Berkeley, CA: University of California – Berkeley.
27. Hesse, Rayner W. (2007). Jewelrymaking Through History: An Encyclopedia. Greenwood Publishing Group. p. 15. ISBN 978-0-313-33507-5.
28. Calvo, Miguel; Sevillano, Emilia (1989). "Pyrite crystals from Soria and La Rioja provinces, Spain". The Mineralogical Record. 20 (6): 451–456.
29. "Which Country Imports the Most Unroasted Iron Pyrites in the World? – IndexBox". www.indexbox.io. Retrieved 2018-09-11.
30. "'Fool's gold' may be valuable after all". phys.org. Retrieved 17 August 2020.
31. Walter, Jeff; Voigt, Bryan; Day-Roberts, Ezra; Heltemes, Kei; Fernandes, Rafael M.; Birol, Turan; Leighton, Chris (1 July 2020). "Voltage-induced ferromagnetism in a diamagnet". Science Advances. 6 (31): eabb7721. Bibcode:2020SciA....6.7721W. doi:10.1126/sciadv.abb7721. ISSN 2375-2548. PMC 7439324. PMID 32832693.
32. Kaur, Harneet; Tian, Ruiyuan; Roy, Ahin; McCrystall, Mark; Horváth, Dominik V.; Onrubia, Guillermo L.; Smith, Ross; Ruether, Manuel; Griffin, Aideen; Backes, Claudia; Nicolosi, Valeria; Coleman, Jonathan N. (22 September 2020). "Production of Quasi-2D Platelets of Non-Layered Iron Pyrite (FeS₂) by Liquid-Phase Exfoliation for High Performance Battery Electrodes". ACS Nano. 14 (10): 13418–13432. doi:10.1021/acsnano.0c05292. hdl:2262/93605. PMID 32960568. S2CID 221864018.
33. Kaur, Harneet; Tian, Ruiyuan; Roy, Ahin; McCrystall, Mark; Smith, Ross; Horváth, Dominik V.; Nicolosi, Valeria; Coleman, Jonathan N. (November 2021). "2D nanosheets from fool's gold by LPE:High performance lithium-ion battery anodes made from stone". FlatChem. 30 (10): 13418–13432. doi:10.1016/j.flatc.2021.100295. hdl:2262/98387. S2CID 243657098.
34. Vaughan, D. J.; Craig, J. R. (1978). Mineral Chemistry of Metal Sulfides. Cambridge, UK: Cambridge University Press. ISBN 978-0-521-21489-6.
35. Bragg, W. L. (1913). "The structure of some crystals as indicated by their diffraction of X-rays". Proceedings of the Royal Society A. 89 (610): 248–277. Bibcode:1913RSPSA..89..248B. doi:10.1098/rspa.1913.0083. JSTOR 93488.
36. Birkholz, M.; Fiechter, S.; Hartmann, A.; Tributsch, H. (1991). "Sulfur deficiency in iron pyrite (FeS_2−x) and its consequences for band structure models". Physical Review B. 43 (14): 11926–11936. Bibcode:1991PhRvB..4311926B. doi:10.1103/PhysRevB.43.11926. PMID 9996968.
37. Brese, Nathaniel E.; von Schnering, Hans Georg (1994). "Bonding Trends in Pyrites and a Reinvestigation of the Structure of PdAs₂, PdSb₂, PtSb₂ and PtBi₂". Z. Anorg. Allg. Chem. 620 (3): 393–404. doi:10.1002/zaac.19946200302.
38. Burgardt, P.; Seehra, M. S. (1977-04-01). "Magnetic susceptibility of iron pyrite (FeS2) between 4.2 and 620 K". Solid State Communications. 22 (2): 153–156. Bibcode:1977SSCom..22..153B. doi:10.1016/0038-1098(77)90422-7. ISSN 0038-1098.
39. Hulliger, F. (December 1963). "Electrical Properties of Pyrite-Type and Related Compounds with Zero Spin Moment". Nature. 200 (4911): 1064–1065. Bibcode:1963Natur.200.1064H. doi:10.1038/2001064a0. S2CID 32504249.
40. Birkholz, M. (1992). "The crystal energy of pyrite". J. Phys.: Condens. Matter. 4 (29): 6227–6240. Bibcode:1992JPCM....4.6227B. doi:10.1088/0953-8984/4/29/007. S2CID 250815717.
41. Wood, Robert (August 1962). "Madelung Constants for the Calcium Carbide and Pyrite Crystal Structures". The Journal of Chemical Physics. 37 (3): 598–600. Bibcode:1962JChPh..37..598W. doi:10.1063/1.1701381.
42. Bonev, I. K.; Garcia-Ruiz, J. M.; Atanassova, R.; Otalora, F.; Petrussenko, S. (2005). "Genesis of filamentary pyrite associated with calcite crystals". European Journal of Mineralogy. 17 (6): 905–913. Bibcode:2005EJMin..17..905B. CiteSeerX 10.1.1.378.3304. doi:10.1127/0935-1221/2005/0017-0905.
43. The pyritohedral form is described as a dodecahedron with pyritohedral symmetry; Dana J. et al., (1944), System of mineralogy, New York, p 282
44. Mindat – bravoite. Mindat.org (2011-05-18). Retrieved on 2011-05-25.
45. Pyrite on. Minerals.net (2011-02-23). Retrieved on 2011-05-25.
46. "Acid Mine Drainage".
47. Deng, Jun; Ma, Xiaofeng; Zhang, Yutao; Li, Yaqing; Zhu, Wenwen (December 2015). "Effects of pyrite on the spontaneous combustion of coal". International Journal of Coal Science & Technology. 2 (4): 306–311. doi:10.1007/s40789-015-0085-y.
48. Onifade, Moshood; Genc, Bekir (17 November 2019). "A review of spontaneous combustion studies – South African context". International Journal of Mining, Reclamation and Environment. 33 (8): 527–547. doi:10.1080/17480930.2018.1466402. S2CID 116125498.
49. Zodrow, E (2005). "Colliery and surface hazards through coal-pyrite oxidation (Pennsylvanian Sydney Coalfield, Nova Scotia, Canada)". International Journal of Coal Geology. 64 (1–2): 145–155. Bibcode:2005IJCG...64..145Z. doi:10.1016/j.coal.2005.03.013.
50. Bowles, Oliver (1918) The structural and ornamental stones of Minnesota. Bulletin 663, United States Geological Survey, Washington. p. 25.
51. Tagnithamou, A; Sariccoric, M; Rivard, P (2005). "Internal deterioration of concrete by the oxidation of pyrrhotitic aggregates". Cement and Concrete Research. 35: 99–107. doi:10.1016/j.cemconres.2004.06.030.
52. Angelo, William (28 January 2009) A material odor mystery over foul-smelling drywall. Engineering News-Record.
53. "Pyrite and your house, what home-owners should know 2012-01-06 at the Wayback Machine" – ISBN 2-922677-01-X – Legal deposit – National Library of Canada, May 2000
54. Shrimer, F. and Bromley, AV (2012) "Pyritic Heave in Ireland". Proceedings of the Euroseminar on Building Materials. International Cement Microscopy Association (Halle Germany)
55. Homeowners in protest over pyrite damage to houses. The Irish Times (11 June 2011
56. Brennan, Michael (22 February 2010) Devastating 'pyrite epidemic' hits 20,000 newly built houses. Irish Independent
57. I.S. EN 13242:2002 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction 2018-08-02 at the Wayback Machine
58. Briggs, D. E. G.; Raiswell, R.; Bottrell, S. H.; Hatfield, D.; Bartels, C. (1996-06-01). "Controls on the pyritization of exceptionally preserved fossils; an analysis of the Lower Devonian Hunsrueck Slate of Germany". American Journal of Science. 296 (6): 633–663. Bibcode:1996AmJS..296..633B. doi:10.2475/ajs.296.6.633. ISSN 0002-9599.
59. Nesse, William D. (2000). Introduction to mineralogy. New York: Oxford University Press. p. 390. ISBN 9780195106916.
60. "ไขข้อข้องใจ'เพชรหน้าทั่ง' สรรพคุณรองจาก'เหล็กไหล'" [Solve the question of 'Phet na tang', secondary properties after 'Lek Lai']. Daily News (in Thai). 2019-10-11. Retrieved 2021-08-26.
61. "ของดีหายาก "ข้าวตอกพระร่วง-ข้าวก้นบาตรพระร่วง" หินศักดิ์สิทธิ์แห่งกรุงสุโขทัย" [A rare good item "Khao tok Phra Ruang - Khao khon bat Phra Ruang", a sacred stone of Sukhothai kingdom]. Komchadluek (in Thai). 2021-02-17. Retrieved 2021-08-26.

Further reading

• American Geological Institute, 2003, Dictionary of Mining, Mineral, and Related Terms, 2nd ed., Springer, New York, ISBN 978-3-540-01271-9.
• David Rickard, Pyrite: A Natural History of Fool's Gold, Oxford, New York, 2015, ISBN 978-0-19-020367-2.

External links

 

Wikimedia Commons has media related to Pyrite.

• "Pyrite oxidation under room conditions".
• Poliakoff, Martyn (2009). "Fool's Gold". The Periodic Table of Videos. University of Nottingham.