Tungsten disulfide

"Tungsten sulfide" redirects here. Not to be confused with Tungsten trisulfide.

Tungsten disulfide is an inorganic chemical compound composed of tungsten and sulfur with the chemical formula WS₂. This compound is part of the group of materials called the transition metal dichalcogenides. It occurs naturally as the rare mineral tungstenite. This material is a component of certain catalysts used for hydrodesulfurization and hydrodenitrification.

Tungsten disulfide

Left: WS2 film on sapphire. Right: dark exfoliated WS2 film floating on water
Names
IUPAC names Tungsten sulfur Bis(sulfanylidene)tungsten
Systematic IUPAC name Dithioxotungsten
Other names Tungsten(IV) sulfide Tungstenite
Identifiers
CAS Number	12138-09-9^Y
3D model (JSmol)	Interactive image
ChEBI	CHEBI:30521^Y
ChemSpider	74837^Y
ECHA InfoCard	100.032.027
EC Number	235-243-3
PubChem CID	82938
CompTox Dashboard (EPA)	DTXSID2065256
InChI InChI=1S/2S.W^Y Key: ITRNXVSDJBHYNJ-UHFFFAOYSA-N^Y InChI=1S/2S.W Key: ITRNXVSDJBHYNJ-UHFFFAOYSA-N
SMILES S=[W]=S
Properties
Chemical formula	WS2
Molar mass	247.98 g/mol
Appearance	Blue-gray powder^[1]
Density	7.5 g/cm^3, solid^[1]
Melting point	1,250 °C (2,280 °F; 1,520 K) decomposes^[1]
Solubility in water	Slightly soluble
Band gap	~1.35 eV (optical, indirect, bulk)^[2]^[3] ~2.05 eV (optical, direct, monolayer)^[4]
Magnetic susceptibility (χ)	+5850·10^−6 cm^3/mol^[5]
Structure
Crystal structure	Molybdenite
Coordination geometry	Trigonal prismatic (W^IV) Pyramidal (S^2−)
Related compounds
Other anions	Tungsten(IV) oxide Tungsten diselenide Tungsten ditelluride
Other cations	Molybdenum disulfide Tantalum disulfide Rhenium disulfide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is ^YN ?) Infobox references

WS₂ adopts a layered structure similar, or isotypic with MoS₂, instead with W atoms situated in trigonal prismatic coordination sphere (in place of Mo atoms). Owing to this layered structure, WS₂ forms non-carbon nanotubes, which were discovered after heating a thin sample of WS₂ in 1992.^[6]

Structure and physical properties

 

Atomic image (top) and model (bottom) of Nb-doped WS₂. Blue, red, and yellow spheres indicate W, Nb, and S atoms, respectively. Nb doping allows to reduce the WS₂ bandgap.^[7]

Bulk WS₂ forms dark gray hexagonal crystals with a layered structure. Like the closely related MoS₂, it exhibits properties of a dry lubricant.

Although it has long been thought that WS₂ is relatively stable in ambient air, recent reports on the ambient air oxidation of monolayer WS₂ have found this to not be the case. In the monolayer form, WS₂ is converted rather rapidly (over the course of days in ambient light and atmosphere) to tungsten oxide via a photo-oxidation reaction involving visible wavelengths of light readily absorbed by monolayer WS₂ (< ~660 nm; > ~1.88 eV).^[8] In addition to light of suitable wavelength, the reaction likely requires both oxygen and water to proceed, with the water thought to act as a catalyst for oxidation. The products of the reaction likely include various tungsten oxide species and sulfuric acid. The oxidation of other semiconductor transition metal dichalcogenides (S-TMDs) such as MoS₂, has similarly been observed to occur in ambient light and atmospheric conditions.^[9]

WS₂ is also attacked by a mixture of nitric and hydrofluoric acid. When heated in oxygen-containing atmosphere, WS₂ converts to tungsten trioxide. When heated in absence of oxygen, WS₂ does not melt but decomposes to tungsten and sulfur, but only at 1250 °C.^[1]

Historically monolayer WS₂ was isolated using chemical exfoliation via intercalation with lithium from n-butyl lithium (in hexane), followed by exfoliation of the Li intercalated compound by sonication in water.^[10] WS₂ also undergoes exfoliation by treatment with various reagents such as chlorosulfonic acid^[11] and the lithium halides.^[12]

Synthesis

WS₂ is produced by a number of methods.^[1][13] Many of these methods involve treating oxides with sources of sulfide or hydrosulfide, supplied as hydrogen sulfide or generated in situ.

Thin films and monolayers

Widely used techniques for the growth of monolayer WS₂ include chemical vapor deposition (CVD), physical vapor deposition (PVD) or metal organic chemical vapor deposition (MOCVD), though most current methods produce sulfur vacancy defects in excess of 1×10¹³ cm⁻².^[14] Other routes entail thermolysis of tungsten(VI) sulfides (e.g., (R₄N)₂WS₄) or the equivalent (e.g., WS₃).^[13]

Freestanding WS₂ films can be produced as follows. WS₂ is deposited on a hydrophilic substrate, such as sapphire, and then coated with a polymer, such as polystyrene. After dipping the sample in water for a few minutes, the hydrophobic WS₂ film spontaneously peels off.^[15]

Applications

WS₂ is used, in conjunction with other materials, as catalyst for hydrotreating of crude oil.^[13] In recent years it has also found applications as a saturable for passively mode locked fibre lasers resulting in femtosecond pulses being produced.

Lamellar tungsten disulphide is used as a dry lubricant for fasteners, bearings, and molds,^[16] as well as having significant use in aerospace and military industries.^{[17][failed verification]} WS₂ can be applied to a metal surface without binders or curing, via high-velocity air impingement. The most recent official standard for this process is laid out in the SAE International specification AMS2530A.^[18]

Research

Like MoS₂, nanostructured WS₂ is actively studied for potential applications, such as storage of hydrogen and lithium.^[11] WS₂ also catalyses hydrogenation of carbon dioxide:^[11][19][20]

CO₂ + H₂ → CO + H₂O

Nanotubes

Tungsten disulfide is the first material which was found to form non-carbon nanotubes, in 1992.^[6] This ability is related to the layered structure of WS₂, and macroscopic amounts of WS₂ have been produced by the methods mentioned above.^[13] WS₂ nanotubes have been investigated as reinforcing agents to improve the mechanical properties of polymeric nanocomposites. In a study, WS₂ nanotubes reinforced biodegradable polymeric nanocomposites of polypropylene fumarate (PPF) showed significant increases in the Young's modulus, compression yield strength, flexural modulus and flexural yield strength, compared to single- and multi-walled carbon nanotubes reinforced PPF nanocomposites, suggesting that WS₂ nanotubes may be better reinforcing agents than carbon nanotubes.^[21] The addition of WS₂ nanotubes to epoxy resin improved adhesion, fracture toughness and strain energy release rate. The wear of the nanotubes-reinforced epoxy is lower than that of pure epoxy.^[22] WS₂ nanotubes were embedded into a poly(methyl methacrylate) (PMMA) nanofiber matrix via electrospinning. The nanotubes were well dispersed and aligned along fiber axis. The enhanced stiffness and toughness of PMMA fiber meshes by means of non-carbon nanotubes addition may have potential uses as impact-absorbing materials, e.g. for ballistic vests.^[23][24]

WS₂ nanotubes are hollow and can be filled with another material, to preserve or guide it to a desired location, or to generate new properties in the filler material which is confined within a nanometer-scale diameter. To this goal, non-carbon nanotube hybrids were made by filling WS₂ nanotubes with molten lead, antimony or bismuth iodide salt by a capillary wetting process, resulting in PbI₂@WS₂, SbI₃@WS₂ or BiI₃@WS₂ core–shell nanotubes.^[25]

Nanosheets

See also: Transition metal dichalcogenide monolayers

WS₂ can also exist in the form of atomically thin sheets.^[26] Such materials exhibit room-temperature photoluminescence in the monolayer limit.^[27]

Transistors

Taiwan Semiconductor Manufacturing Company (TSMC) is investigating use of WS
₂ as a channel material in field effect transistors. The approximately 6-layer thick material is created using chemical vapor deposition (CVD).^[28]

References

 

Wikimedia Commons has media related to Tungsten disulfide.

1. Eagleson, Mary (1994). Concise encyclopedia chemistry. Walter de Gruyter. p. 1129. ISBN 978-3-11-011451-5.
2. Kam KK, Parkinson BA (February 1982). "Detailed photocurrent spectroscopy of the semiconducting group VIB transition metal dichalcogenides". Journal of Physical Chemistry. 86 (4): 463–467. doi:10.1021/j100393a010.
3. Baglio JA, Calabrese GS, Kamieniecki E, Kershaw R, Kubiak CP, Ricco AJ, et al. (July 1982). "Characterization of n-Type Semiconducting Tungsten Disulfide Photoanodes in Aqueous and Nonaqueous Electrolyte Solutions Photo-oxidation of Halides with High Efficiency". J. Electrochem. Soc. 129 (7): 1461–1472. Bibcode:1982JElS..129.1461B. doi:10.1149/1.2124184.
4. Gutiérrez H, Perea-López N, Elías AL, Berkdemir A, Wang B, Lv R, et al. (November 2012). "Extraordinary Room-Temperature Photoluminescence in Triangular WS2 Monolayers". Nano Letters. 13 (8): 3447–3454. arXiv:1208.1325. Bibcode:2013NanoL..13.3447G. doi:10.1021/nl3026357. PMID 23194096. S2CID 207597527.
5. Haynes WM, ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, FL: CRC Press. p. 4.136. ISBN 1-4398-5511-0.
6. Tenne R, Margulis L, Genut M, Hodes G (1992). "Polyhedral and cylindrical structures of tungsten disulphide". Nature. 360 (6403): 444–446. Bibcode:1992Natur.360..444T. doi:10.1038/360444a0. S2CID 4309310.
7. Sasaki S, Kobayashi Y, Liu Z, Suenaga K, Maniwa Y, Miyauchi Y, et al. (2016). "Growth and optical properties of Nb-doped WS₂ monolayers". Applied Physics Express. 9 (7): 071201. Bibcode:2016APExp...9g1201S. doi:10.7567/APEX.9.071201. 
8. Kotsakidis JC, Zhang Q, Vazquez de Parga AL, Currie M, Helmerson K, Gaskill DK, et al. (July 2019). "Oxidation of Monolayer WS2 in Ambient Is a Photoinduced Process". Nano Letters. 19 (8): 5205–5215. arXiv:1906.00375. Bibcode:2019NanoL..19.5205K. doi:10.1021/acs.nanolett.9b01599. PMID 31287707. S2CID 173990948.
9. Gao J, Li B, Tan J, Chow P, Lu TM, Koratker N (January 2016). "Aging of Transition Metal Dichalcogenide Monolayers". ACS Nano. 10 (2): 2628–2635. doi:10.1021/acsnano.5b07677. PMID 26808328. S2CID 18010466.
10. Joensen P, Frindt RF, Morrison SR (1986). "Single-layer MoS2". Materials Research Bulletin. 21 (4): 457–461. doi:10.1016/0025-5408(86)90011-5.
11. Bhandavat R, David L, Singh G (2012). "Synthesis of Surface-Functionalized WS₂ Nanosheets and Performance as Li-Ion Battery Anodes". The Journal of Physical Chemistry Letters. 3 (11): 1523–30. doi:10.1021/jz300480w. PMID 26285632.
12. Ghorai A, Midya A, Maiti R, Ray SK (2016). "Exfoliation of WS2 in the semiconducting phase using a group of lithium halides: a new method of Li intercalation". Dalton Transactions. 45 (38): 14979–14987. doi:10.1039/C6DT02823C. PMID 27560159.
13. Panigrahi, Pravas Kumar, Pathak, Amita (2008). "Microwave-assisted synthesis of WS₂ nanowires through tetrathiotungstate precursors" (free download). Sci. Technol. Adv. Mater. 9 (4): 045008. Bibcode:2008STAdM...9d5008P. doi:10.1088/1468-6996/9/4/045008. PMC 5099650. PMID 27878036.
14. Hong J, Hu Z, Probert M, Li K, Lv D, Yang X, et al. (February 2015). "Eploring atomic defects in molybdenum disulphide monolayers". Nature Communications. 6: 6293. Bibcode:2015NatCo...6.6293H. doi:10.1038/ncomms7293. PMC 4346634. PMID 25695374.
15. Yu Y, Fong PW, Wang S, Surya C (2016). "Fabrication of WS2/GaN p-n Junction by Wafer-Scale WS2 Thin Film Transfer". Scientific Reports. 6: 37833. Bibcode:2016NatSR...637833Y. doi:10.1038/srep37833. PMC 5126671. PMID 27897210.
16. French LG, ed. (1967). "Dicronite". Machinery. Vol. 73. Machinery Publications Corporation. p. 101.
17. "Quality Approved Special Processes By Special Process Code". BAE Systems. 2020-07-07.
18. "AMS2530A: Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied". SAE International. Retrieved 2020-07-10.
19. Lassner, Erik, Schubert, Wolf-Dieter (1999). Tungsten: properties, chemistry, technology of the element, alloys, and chemical compounds. Springer. pp. 374–. ISBN 978-0-306-45053-2.
20. Engineer making rechargeable batteries with layered nanomaterials. Science Daily (2013-01-016)
21. Lalwani G (September 2013). "Tungsten disulfide nanotubes reinforced biodegradable polymers for bone tissue engineering". Acta Biomaterialia. 9 (9): 8365–8373. doi:10.1016/j.actbio.2013.05.018. PMC 3732565. PMID 23727293.
22. Zohar, E., et al. (2011). "The Mechanical and Tribological Properties of Epoxy Nanocomposites with WS₂ Nanotubes". Sensors & Transducers Journal. 12 (Special Issue): 53–65.
23. Reddy, C. S., Zak, A., Zussman, E. (2011). "WS₂ nanotubes embedded in PMMA nanofibers as energy absorptive material". J. Mater. Chem. 21 (40): 16086–16093. doi:10.1039/C1JM12700D.
24. Nano-Armor: Protecting the Soldiers of Tomorrow. Physorg.com (2005-12-10). Retrieved on 2016-01-20
25. Kreizman R, Enyashin AN, Deepak FL, Albu-Yaron A, Popovitz-Biro R, Seifert G, et al. (2010). "Synthesis of Core-Shell Inorganic Nanotubes". Adv. Funct. Mater. 20 (15): 2459–2468. doi:10.1002/adfm.201000490. S2CID 136725896.
26. Coleman JN, Lotya M, O'Neill A, Bergin SD, King PJ, Khan U, et al. (2011). "Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials". Science. 331 (6017): 568–71. Bibcode:2011Sci...331..568C. doi:10.1126/science.1194975. hdl:2262/66458. PMID 21292974. S2CID 23576676.
27. Gutiérrez HR, Perea-López N, Elías AL, Berkdemir A, Wang B, Lv R, et al. (2013). "Extraordinary Room-Temperature Photoluminescence in Triangular WS₂ Monolayers". Nano Letters. 13 (8): 3447–54. arXiv:1208.1325. Bibcode:2013NanoL..13.3447G. doi:10.1021/nl3026357. PMID 23194096. S2CID 207597527.
28. Cheng CC, Chung YY, Li UY, Lin CT, Li CF, Chen JH, et al. (2019). "First demonstration of 40-nm channel length top-gate WS2 pFET using channel area-selective CVD growth directly on SiOx/Si substrate". 2019 Symposium on VLSI Technology. IEEE. pp. T244–T245. doi:10.23919/VLSIT.2019.8776498. ISBN 978-4-86348-719-2. S2CID 198931613.