Continuous or discrete variable

Not to be confused with Discrete-time and continuous-time variables.

In mathematics and statistics, a quantitative variable may be continuous or discrete if they are typically obtained by measuring or counting, respectively.^[1] If it can take on two particular real values such that it can also take on all real values between them (including values that are arbitrarily or infinitesimally close together), the variable is continuous in that interval.^[2] If it can take on a value such that there is a non-infinitesimal gap on each side of it containing no values that the variable can take on, then it is discrete around that value.^[3] In some contexts a variable can be discrete in some ranges of the number line and continuous in others.

Variables can be divided into two main categories: qualitative (categorical) and quantitative (numerical). Continuous and discrete variables are subcategories of quantitative variables. Note that this schematic is not exhaustive in terms of the types of variables.

Continuous variable

A continuous variable is a variable whose value is obtained by measuring, i.e., one which can take on an uncountable set of values.

For example, a variable over a non-empty range of the real numbers is continuous, if it can take on any value in that range. The reason is that any range of real numbers between ${\displaystyle a}$  and ${\displaystyle b}$  with ${\displaystyle a,b\in \mathbb {R} ;a\neq b}$  is uncountable, with infinitely many values within the range.^[4]

Methods of calculus are often used in problems in which the variables are continuous, for example in continuous optimization problems.^[5]

In statistical theory, the probability distributions of continuous variables can be expressed in terms of probability density functions.^[6]

In continuous-time dynamics, the variable time is treated as continuous, and the equation describing the evolution of some variable over time is a differential equation.^[7] The instantaneous rate of change is a well-defined concept that takes the ratio of the change in the dependent variable to the independent variable at a specific instant.

 

This is an image of vials with different amounts of liquid. A continuous variable could be the volume of liquid in the vials. A discrete variable could be the number of vials.

Discrete variable

In contrast, a variable is a discrete variable if and only if there exists a one-to-one correspondence between this variable and ${\displaystyle \mathbb {N} }$ , the set of natural numbers.^[8] In other words; a discrete variable over a particular interval of real values is one for which, for any value in the range that the variable is permitted to take on, there is a positive minimum distance to the nearest other permissible value. The value of a discrete variable can be obtained by counting, and the number of permitted values is either finite or countably infinite. Common examples are variables that must be integers, non-negative integers, positive integers, or only the integers 0 and 1.^[9]

Methods of calculus do not readily lend themselves to problems involving discrete variables. Especially in multivariable calculus, many models rely on the assumption of continuity.^[10] Examples of problems involving discrete variables include integer programming.

In statistics, the probability distributions of discrete variables can be expressed in terms of probability mass functions.^[6]

In discrete time dynamics, the variable time is treated as discrete, and the equation of evolution of some variable over time is called a difference equation.^[11] For certain discrete-time dynamical systems, the system response can be modeled by solving the difference equation for an analytical solution.

In econometrics and more generally in regression analysis, sometimes some of the variables being empirically related to each other are 0-1 variables, being permitted to take on only those two values.^[12] The purpose of the discrete values of 0 and 1 is to use the dummy variable as a ‘switch’ that can ‘turn on’ and ‘turn off’ by assigning the two values to different parameters in an equation. A variable of this type is called a dummy variable. If the dependent variable is a dummy variable, then logistic regression or probit regression is commonly employed. In the case of regression analysis, a dummy variable can be used to represent subgroups of the sample in a study (e.g. the value 0 corresponding to a constituent of the control group).^[13]

Mixture of continuous and discrete variables

A mixed multivariate model can contain both discrete and continuous variables. For instance, a simple mixed multivariate model could have a discrete variable ${\displaystyle x}$ , which only takes on values 0 or 1, and a continuous variable ${\displaystyle y}$ .^[14] An example of a mixed model could be a research study on the risk of psychological disorders based on one binary measure of psychiatric symptoms and one continuous measure of cognitive performance.^[15] Mixed models may also involve a single variable that is discrete over some range of the number line and continuous at another range.

In probability theory and statistics, the probability distribution of a mixed random variable consists of both discrete and continuous components. A mixed random variable does not have a cumulative distribution function that is discrete or everywhere-continuous. An example of a mixed type random variable is the probability of wait time in a queue. The likelihood of a customer experiencing a zero wait time is discrete, while non-zero wait times are evaluated on a continuous time scale.^[16]

See also

• Continuous or discrete spectrum
• Continuous function
• Count data
• Discrete mathematics
• Continuous spectrum
• Discrete spectrum
• Discrete time and continuous time
• Continuous-time stochastic process
• Discrete-time stochastic process
• Continuous modelling
• Discrete modelling
• Continuous geometry
• Discrete geometry
• Continuous series representation
• Discrete series representation
• Discretization
• Interpolation
• Discrete measure
• Discrete space

References

1. Ali, Zulfiqar; Bhaskar, S. Bala (September 2016). "Basic statistical tools in research and data analysis". Indian Journal of Anaesthesia. 60 (9): 662–669. doi:10.4103/0019-5049.190623. PMC 5037948.
2. Kaliyadan, Feroze; Kulkarni, Vinay (January 2019). "Types of Variables, Descriptive Statistics, and Sample Size". Indian Dermatology Online Journal. 10 (1): 82–86. doi:10.4103/idoj.IDOJ_468_18. PMC 6362742. PMID 30775310.
3. K.D. Joshi, Foundations of Discrete Mathematics, 1989, New Age International Limited, [1], page 7.
4. Brzychczy, Stanisaw; Gorniewicz, Lech (2011). "Continuous and discrete models of neural systems in infinite-dimensional abstract spaces". Neurocomputing. 74 (17): 2711-2715. doi:10.1016/j.neucom.2010.11.005.
5. Griva, Igor; Nash, Stephen; Sofer, Ariela (2009). Linear and nonlinear optimization (2nd ed.). Philadelphia: Society for Industrial and Applied Mathematics. p. 7. ISBN 978-0-89871-661-0. OCLC 236082842.
6. Dekking, Frederik Michel; Kraaikamp, Cornelis; Lopuhaä, Hendrik Paul; Meester, Ludolf Erwin (2005). "A Modern Introduction to Probability and Statistics". Springer Texts in Statistics. doi:10.1007/1-84628-168-7. ISBN 978-1-85233-896-1. ISSN 1431-875X.
7. Poyton, A. A.; Varziri, Mohammad Saeed; McAuley, Kimberley B.; MclellanPat James, Pat James; Ramsay, James O. (February 15, 2006). "Parameter estimation in continuous-time dynamic models using principal differential analysis". Computers & Chemical Engineering. 30 (4): 698-708. doi:10.1016/j.compchemeng.2005.11.008.
8. Odifreddi, Piergiorgio (February 18, 1992). Classical Recursion Theory: The Theory of Functions and Sets of Natural Numbers. North Holland Publishing Company. p. 18. ISBN 978-0444894830.
9. van Douwen, Eric (1984). Handbook of Set-Theoretic Topology. North Holland: Elsevier. pp. 113–167. ISBN 978-0-444-86580-9.
10. Clogg, Clifford C.; Shockey, James W. (1988). Handbook of Multivariate Experimental Psychology. Boston, Massachusetts: Springer Publishing Company. p. 337-365. ISBN 978-1-4613-0893-5.
11. Thyagarajan, K.S. (2019). Introduction to Digital Signal Processing Using MATLAB with Application to Digital Communications (1 ed.). Springer Publishing Company. p. 21-63. ISBN 978-3319760285.
12. Miller, Jerry L.L.; Erickson, Maynard L. (May 1974). "On Dummy Variable Regression Analysis". Sociological Methods & Research. 2 (4): 395-519. doi:10.1177/004912417400200402.
13. Hardy, Melissa A. (February 25, 1993). Regression with Dummy Variables (Quantitative Applications in the Social Sciences) (1st ed.). Newbury Park: Sage Publications, Inc. p. v. ISBN 0803951280.
14. Olkin, Ingram; Tate, Robert (June 1961). "Multivariate Correlation Models with Mixed Discrete and Continuous Variables". The Annals of Mathematical Statistics. 32 (2): 448-465. doi:10.1214/aoms/1177705052.
15. Fitzmaurice, Garrett M.; Laird, Nan M. (March 1997). "Regression Models for Mixed Discrete and Continuous Responses with Potentially Missing Values". Biometrics. 53 (1): 110-122. doi:10.2307/2533101.
16. Sharma, Shalendra D. (March 1975). "On a Continuous/Discrete Time Queueing System with Arrivals in Batches of Variable Size and Correlated Departures". Journal of Applied Probability. 12 (1): 115-129. doi:10.2307/3212413.