Metallurgy during the Copper Age in Europe

The Copper Age, also called the Eneolithic or the Chalcolithic Age, has been traditionally understood as a transitional period between the Neolithic and the Bronze Age, in which a gradual introduction of the metal (native copper) took place, while stone was still the main resource utilized. Recent archaeology has found that the metal was not introduced so gradually and that this entailed significant social changes, such as developments in the type of habitation (larger villages, launching of fortifications), long-distance trade, and copper metallurgy.

Reconstruction of Ötzi's copper axe (c. 3300 BCE)

Some of the earliest Copper Age artifacts were found in the 5th and 6th millennia BCE archaeological sites of the Vinča culture such as Majdanpek, Jarmovac and Pločnik (including a copper axe from 5500 BCE). Somewhat later, in the 5th millennium BCE, metalwork is attested at Rudna Glava mine in Serbia, and at Ai Bunar mine in Bulgaria.^[1]

3rd millennium BCE copper metalwork is attested in places like Palmela (Portugal), Cortes (Navarre), and Stonehenge (England). However, as often happens with the prehistoric times, the limits of the age cannot be clearly defined and vary between different sources.

Inception of metallurgy in Europe

The theory that metallurgy was imported into Europe from the Near East has been practically ruled out. A second hypothesis, that there were two main points of origin of metallurgy in Europe, in southern Spain and in West Bulgaria, is also doubtful due to the existence of sites outside the centers of diffusion where metallurgy was known simultaneously with, or before, those in the ‘original’ nuclei, such as Brixlegg (Tyrol, Austria), while sites closer to the supposed origins of metallurgy, such as in the north of Spain, show fewer metal artifacts than sites in the south and practically no evidence of production.^[2]

Currently, the general opinion is that the development of metallurgy took place independently in different places, at different times, with various techniques. One fact that supports this interpretation is that, although the final products (beads, rings, sickles, swords, axes, etc.) are quite similar throughout Europe, the method of production is not. Thus the use of crucibles was the technique utilized in the south of Spain, whereas central Europe employed a slagging process, but Cabrierés (France) used a primitive oxidizing non-slagging process,^[3] while in the British Isles the absence of debris, slag or ceramic suggests another technique.^[4]

Consequently, the way in which metallurgy was initiated differs considerably depending on the region. There are areas in which copper seems to play a crucial role (i.e., the Balkans), whereas other areas show no interest in it at all. Then there are societies that use copper artifacts, but do not practice metallurgy,^[5] and there are other ones that fully adopt some of the cultural innovations but ignore the rest.^[who?] One example of the latter is Basque country in northern Spain, where splendid large dolmens are present along the Ebro river, but metal is rather infrequent, and when it does appear between the trapping, it is more often bronze or arsenical copper than copper.^[6] According to radiocarbon dating, the Pre-Bell Beaker Chalcolithic with copper metallurgy began on the Iberian Peninsula in the last third of the IV millennium cal. BC, in the Northern Iberian Plateau in 3000 cal. BC and the Bell Beaker Chalcolithic appeared around 2500 cal. BC.^[7][8][9]

Reasons to use copper

Copper is the eighth most abundant metal in the Earth's crust, is available all over the world, and is one of the few that can appear in a pure state.^[10] It is not complicated to work with, and a bare hammering can be enough to transform a nugget into a bead. The eye-catching look of native copper makes it easy to recognize, and even flashier if converted into jewelry, a possible motivation for humankind to start metallurgy with it. An evolutive technological process has been described,^[11] although there are authors like Javinovic,^[12] who think that it is not necessary to pass through the first stages to reach the last one.

Converting copper

 

Sample of native copper.

To start with, the raw material must be obtained. Copper can be found in over 160 different minerals,^[10] but mining activities are entailed to obtain them in large quantities if a reasonable amount of copper is wanted. Some of the most commonly exploited minerals are cuprite, malachite, azurite, chalcopyrite, chrysocolla and tennantite; e.g. malachite was extracted in Rudna Glava (Serbia), Cabrierés (France) or Chinflón (Riotinto, Spain). In fact, one of the possible explanations about what Ötzi the Iceman, the ancient mummy found in the Alps who lived around 3300 years BCE, was doing at 3,210 metres (10,530 ft) of altitude is that he could have been prospecting for new ores of minerals.^[13]

Secondly, the mineral is separated from the gangue. This is only possible by smelting or beneficiation. To do so, it is necessary to use a furnace that is able to reach at least 1,089 °C (1,992 °F).

Lastly, a wide range of specific tools and resources have to be available, such as furnaces, moulds, crucibles, mauls, etc.

• Stage A: Although native copper nowadays is frequently displayed in museum showcases of mineral collections, it once occurred copiously during prehistoric times. In Cyprus or Crete, collecting the mineral was once as easy as simply picking it up from the ground. In fact, native copper is no longer as easy to find in that state these days. The treatment of this native mineral was also uncomplicated through cold-hammering. This only permitted the production of a limited range of artifacts like awls, pins, or beads. In larger objects, the metal cracks when it is cold-hammered.
• Stage B: Annealing the metal on an open fire (200–300 °C or 390–570 °F is hot enough) reduces its hardness considerably and gives in malleability. This permits the manufacture of slightly more sophisticated objects, like bracelets, but is still a rather limited technique.
• Stage C: In the first two steps, the material used was native copper that does not actually need specialized technology. Probably, due to the situation that native copper was increasingly difficult to find, copper ore is used in this third step. This is a very significant development. In fact, this is truly the beginning of the metallurgy, as the mineral has to be smelted to separate the copper from the gangue, requiring technology.

Early mining in Europe

 

Polished chrysocolla.

Minerals of copper were known from ancient times. In Crete, little fragments of malachite and azurite were powdered and used as make up or to decorate ceramic as early as 6000 BCE.^[5]

Therefore, the minerals were not collected because people were looking for copper but for virtues like those mentioned or simply because of its brightness and colour, but this knowledge of the minerals is critical since they already knew how to recognize them and where to collect them when, later, they started the systematic search for ores.

Numerous examples of mines are known all over Europe,^[14] from the east: Rudna Glava (Serbia), Ai Bunar (Bulgaria); to the west: Mount Gabriel (Ireland), Great Orme, Alderley Edge (United Kingdom); crossing Central Europe: Mitterberg (Salzach, Austria), Neuchâtel (Switzerland), Cabrierés (France); to the south: Riotinto, Mola Alta de Serelles (Spain); and the Mediterranean: Corsica, Cyprus, and the Cyclades islands. It is remarkable that, usually, it is not a single mine but a complex, with a variable, large number of mineshafts, as in Rudna Glava (30) or Mount Gabriel (31).

Techniques and tools

The techniques observed in all of them are quite similar. Basically they used the thermic alteration or firesetting (Mohen 1992, Craddock 1995, Eiroa et al. 1996, Timberlake 2003). This consists of applying fire to the rock and then pouring water over it: the rapid changes of temperature will cause cracks within the rocks that can be totally broken with the help of mauls and picks. Then the useful masses were selected, crushed and transported to the production centre that could be in the surrounding area (Mitterberg) or far away (Rudna Glava).

The mines were exploited in extremely efficient and clever ways, according to the technology available (Jovanovic 1980, Craddock 1995, Timberlake 2003). The entire convenient mineral was collected and the abandoned shafts carefully refilled with gangue and rocks (Mohen 1992; 85). For example, at Mount Gabriel, it was estimated that they extracted the astonishing number of 32,570.15 tonnes (35,902.44 tons) of rock, gangue and ore. The usable amount of copper was 162.85 tonnes and the final smelting finished metal was 146.56 tonnes (Jackson 1980; 24). The entire process was thoroughly described in 1744 by Lewis Morris, Crown Mineral Agent for Cardiganshire, and, incidentally, antiquarian.^[15]

Their method seems to be this. They make a great fire of wood in the bottom of their rakes which were always open up on that account, and when the rock was sufficiently hot they cast water upon it, which shiver’d it; and then with stone wedges, which they drove in with other stones, they work’d their way through the hardest rocks, tho’ but slowly.

The tools employed are mainly presented in Lewis' observations, but other ones have been recovered in archaeological context:

• Stone tools: The most frequent find are the stone hammers, normally made of hard rocks accessible to the mine, beach or river pebbles.^[16] There is no standardization of these mauls but is common a system of hafting, usually a groove carved in the middle for where a rope was tied to the handle, like the twisted hazel recovered in Copa Hill.^[17]
• Antler and bone tools: Picks and scrapes made of bone and antlers have been found in the majority of the mines.^[18]
• Wood: Evidence of wooden tools are more infrequent. Nevertheless in places like Ai Bunar or Mount Gabriel were recovered shovels and wedges. A rudimentary system of stairs or scaffoldings can be supposed (Mohen 1992).
• Metal: The use of any metallic tool is rather strange and extraordinary. It seems that the copper was not used for the miners' tools. However copper chisels and discarded axes could be utilized as wedges.^[19]
• Other evidence: The presence of coal and charcoal, crucial for the firing (fire-setting) and furnace (fuel), is habitual. Leather sacks (at Ai Bunar) and shoulder baskets (at Copa Hill) were used to transport the crushed mineral.

Society

 

Elite male tomb, Varna culture (Bulgaria), 4500 BCE

The information available about the people of the Copper Age has not substantially increased along with the number of archaeological sites. Several ideas have been proffered, one of the most followed is that the metal itself did not bring abrupt transformation into the people's life,^[20] or even more that early copper does not produce anything useful at all,^[21] meaning with this that with the copper, they produced mainly jewellery and, overall, weapons that obviously were not within reach of the majority of the population but only to privileged individuals. In other words, the real importance of the metal is not utilitarian but social. This is a suitable explanation about the rising of Great Cultures of Metal such as Vinča culture (Ex-Yugoslavia) Tiszapolgar and Unetice culture (Central Europe), Remedello and Rinaldone (Italy), Montagne Noire (France), El Argar and Targas (Spain), etc.

As the period moved forward, especially around the 3rd millennium, new and complex realities would appear strongly linked to the metal, like the impressive fortified villages of Los Millares (Spain), Vila Nova de Sao Pedro (Portugal) or the more modest cairn next to Copa Hill in the United Kingdom destinated to control the centres of extraction, or the equally and generalized cultural phenomenons of Megalithism, Rock Art, Bell Beakers Vessels that are known from Scandinavia to the South of Spain and from Scotland to Turkey.

See also

• Copper
• Copper Age
• Copper metallurgy in Africa
• Metallurgy
• Native copper

Notes

1. Radivojević, Miljana; Roberts, Benjamin W. (2021). "Early Balkan Metallurgy: Origins, Evolution and Society, 6200–3700 BC". Journal of World Prehistory (34). Retrieved 11 June 2022.
2. Pérez Arrondo 1987, pp. 159–180.
3. Bourgarit et al. 2003, p. 431–440.
4. Craddock 1995, pp. 23–31.
5. Mohen 1992, p. ^{[page needed]}.
6. Almuzara 1984, pp. 51–156.
7. Marcos Saiz (2006), pp. 225–270.
8. Marcos Saiz (2016), pp. 686–696.
9. Marcos Saiz & Díez (2017), pp. 45–67.
10. Atkinson 1987, p. 3.
11. Coghlan 1975, pp. 162–165.
12. Mohen 1992, p. 52.
13. Peroni 1996, p. 336.
14. Bartelheim et al. 2002, pp. 33–82.
15. Timberlake 2003, p. 22.
16. Jovanovic 1980, p. ^{[page needed]}.
17. Timberlake 2003, p. 32-33.
18. Craddock 1995, p. ^{[page needed]}.
19. Craddock 1995, p. 97.
20. Cunliffe 1998, p. 170.
21. Renfrew 1986, p. 146.

References

• Atkinson, R. Lesley (1987). Copper and copper mining. Princes Risborough: Shire. ISBN 0-85263-895-7.
• Almuzara, Ana Cava (1984). "La industria lítica en los dólmenes del País Vasco meridional" [The lithic industry in the dolmens of the southern Basque Country]. Veleia: Revista de prehistoria, historia antigua, arqueología y filología clásicas (in Spanish). No. 1. ISSN 0213-2095.
• Bourgarit, David; Mille, Benoît; Ambert, Paul; Prange, M.; Hauptmann, Andreas (2003). Chalcolithic Fahlore Smelting at Cabrières:Reconstruction of Smelting Processes by Archaeometallurgical Finds. Archaeometallurgy in Europe : International Conference : 24-25-26 September 2003, Milan, Italy : proceedings (pdf) (2nd ed.). Milano: Associazione Italiana di Metallurgia. ISBN 88-85298-50-8.
• Bartelheim, Martin; Eckstein, K.; Huijsmans, M.; Krauß, R.; Pernicka, Ernst (2002). Kupferzeitliche Metallgewinnung in Brixlegg, Österreich [Chalcolithic Metal Extraction in Brixlegg, Austria]. Archaeometallurgy in Europe : International Conference : 24-25-26 September 2003, Milan, Italy : proceedings (pdf) (in German). Vol. 1. Milano: Associacione Italiana di Metallurgia.
• Coghlan, Herbert Henery (1975). Notes on the Prehistoric Metallurgy of Copper and Bronze in the Old World, Including an examination of specimens from the Pitt Rivers Museum and bronze casting in ancient moulds by E. Voce and contributions by P.R.S. Moorey and T.K. Penniman. Vol. 26 (2nd ed.). Oxford: Pitt Rivers Museum, University of Oxford. doi:10.1017/S0003598X00023942. ISBN 0-902793-12-8. ISSN 0003-598X.
• Cvekic, Ljilja (2007) Prehistoric women had passion for fashion.
• Craddock, P.T. (1986). "Bronze Age Metallurgy in Britain". Current Anthropology. 9 (4): 106–109.
• Craddock, Paul T. (1995). Early metal mining and production. Edinburgh: Edinburgh University Press. ISBN 0-7486-0498-7.
• Cunliffe, Barry W. (1998). Prehistoric Europe : Prehistoric Europe: An Illustrated History. Oxford: Oxford University Press. ISBN 0-19-288063-2.
• Eiroa, J.J. et alii (1999): Nociones de tecnología y tipología en Prehistoria. Barcelona. Ariel.
• Jackson, J.S. (1980). "Bronze Age copper mining in Counties Cork and Kerry, Ireland". In Craddock, P.T. (ed.). Scientific studies in early mining and extractive metallurgy. London: British Museum. pp. 9–30.
• Jovanovic, B. (1980). "Primary copper mining and the production of copper". In Craddock, P.T. (ed.). Scientific studies in early mining and extractive metallurgy. London: British Museum. pp. 31–40.
• Marcos Saiz, F. Javier (2006). La Sierra de Atapuerca y el Valle del Arlanzón. Patrones de asentamiento prehistóricos. Editorial Dossoles. Burgos, Spain. ISBN 9788496606289.
• Marcos Saiz, F. Javier (2016). La Prehistoria Reciente del entorno de la Sierra de Atapuerca (Burgos, España). British Archaeological Reports (Oxford, U.K.), BAR International Series 2798. ISBN 9781407315195.
• Marcos Saiz, F.J.; Díez, J.C. (2017). "The Holocene archaeological research around Sierra de Atapuerca (Burgos, Spain) and its projection in a GIS geospatial database". Quaternary International. 433 (A): 45–67. Bibcode:2017QuInt.433...45M. doi:10.1016/j.quaint.2015.10.002.
• Mohen, Jean-Pierre (1992). Metalurgia prehistórica : introducción a la paleometalurgia [Prehistoric metallurgy: introduction to paleometallurgy] ([1a. ed.] ed.). Barcelona: Masson. ISBN 84-311-0605-0.
• Mohen J.P, Peroni, R, Katinchorov R. and Tasié R, Eccedy I. and Kovacs T, Merpert J.M, Briard J., Thrane H., Kaelas L. (1996) Europe in the Copper Age, in History of humanity: scientific and cultural development Vol.2, From the third millennium to the seventh century BC, edited by Dani A.H., J.-P. Mohen. London: Routledge; Paris: UNESCO, pages 320-391.
• Moreno A, et al. (2003) Metallurgical control and social power. The Bronze Age Communities of High Guadalquivir in Archeometallurgy in Europe (International Conference) vol. 1 Milano: Associacione Italiana di Metallurgia, pages 625-634.
• Ortiz T., L. et al. (1990): El hábitat en la Prehistoria en el valle del Río Rojo (Álava) "Cuaderno de Sección Prehistoria-Arqueología", núm. 3, San Sebastián.
• Pérez Arrondo, Carlos Lázar (1987). El fenómeno megalítico en la margen derecha del Ebro [The megalithic phenomenon on the right bank of the Ebro] (1. ed.). Madrid: Ministerio de Cultura, Dirección General de Bellas Artes y Archivos, Subdirección General de Arqueología y Etnología. ISBN 84-505-6553-7.
• Peroni, Renato (1996). L'Italia alle soglie della storia [Italy on the threshold of history] (in Italian) (1.] ed.). Rome: Laterza. ISBN 88-420-5018-0.
• Renfrew, C. (1986). "Varna and the emergence of wealth in prehistoric Europe". In Appaduri, Anjuin (ed.). The social life of things. Cambridge University Press.
• Ruiz-Taboada, A. & Montero-Ruiz, I., "The oldest metallurgy in western Europe" in Antiquity by Crawford, Osbert Guy Stanhope, 73(282), Princeton University Press for the Research Institute on International Change, Columbia University, 1999, pages 897-903.
• Shennan, S., "Cost, benefit and value in the organization of early European copper production" in Antiquity by Crawford, Osbert Guy Stanhope, 73(280), Princeton University Press for the Research Institute on International Change, Columbia University, 1999, pages 352-363.
• Tasić, Nikola (1995). Eneolithic cultures of central and west Balkans. Belgrade: Draganić. ISBN 86-441-0117-X.
• Timberlake, Simon (2003). "Early mining research in Britain: The Developments of the Last Ten Years". In Craddock, P. T; Lang, Janet (eds.). Mining and metal production through the ages. British Museum. pp. 22–42.