fbpx
Wikipedia

CVV 7 Pinocchio

The CVV 7 Pinocchio was a single seat competition glider designed and built in Italy, first flown in 1952 though designed in 1940. Only one was built.

Pinocchio
Role Single seat competition glider
National origin Italy
Manufacturer Centro Volo a Vela, Milan (CVV)
Designer Ermenegildo Preti
First flight April 1952
Number built 1

Design and development edit

The Pinocchio was designed at the Centro Volo a Vela (CVV), or Experimental Soaring Centre, of the Royal Polytechnic of Milan by Gildo Preti in 1940 and its construction was started but then interrupted by World War II. In 1946 students began its completion, though it was not finished until 1951 and first flew in April 1952 at Linate, piloted by Riccardo Brigliadori.[1]

For an all wood aircraft the Pinocchio had a high aspect ratio wing, cantilevered, straight tapered on both edges and with semi-elliptical tips. This was built around a single spar with a plywood skinned D-box ahead of it and fabric covering behind. Ailerons reached from the tips to about half span and inboard of them there were airbrakes, mounted at mid-chord, which extended above and below the wings.[1]

The Pinocchio was a high wing aircraft, with the wing mounted on top of the rear fuselage. This was slender, circular in cross section and plywood skinned. The cockpit, with a frameless canopy, was placed immediately ahead of the wing leading edge, its top level with the wing's upper surface. Without a landing skid, the Pinocchio landed on a retractable, sprung monowheel and tail bumper. Its horizontal tail was mounted on top of the fuselage, far enough forward to place the trailing edges of the fabric covered elevators at the rudder hinge. The fin was straight edged and small but the rudder was full, curved and balanced.[1]

Only one Pinocchio was built.[1]

Specifications edit

Data from Italian Vintage Sailplanes[1]

General characteristics

  • Crew: One
  • Length: 7.75 m (25 ft 5 in)
  • Wingspan: 18.50 m (60 ft 8 in)
  • Wing area: 18 m2 (190 sq ft)
  • Aspect ratio: 19
  • Airfoil: root: NACA 4415; tip: NACA 2R12(sic)[2]
  • Empty weight: 222 kg (489 lb)
  • Gross weight: 320 kg (705 lb)

Performance

  • Maximum glide ratio: estimated 33:1
  • Wing loading: 17.80 kg/m2 (3.65 lb/sq ft)

References edit

  1. ^ a b c d e Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 111, 126–7. ISBN 978-3-9808838-9-4.
  2. ^ Lednicer, David. "The Incomplete Guide to Airfoil Usage". m-selig.ae.illinois.edu. Retrieved 16 April 2019.

pinocchio, single, seat, competition, glider, designed, built, italy, first, flown, 1952, though, designed, 1940, only, built, pinocchio, role, single, seat, competition, glider, national, origin, italy, manufacturer, centro, volo, vela, milan, designer, ermen. The CVV 7 Pinocchio was a single seat competition glider designed and built in Italy first flown in 1952 though designed in 1940 Only one was built Pinocchio Role Single seat competition glider National origin Italy Manufacturer Centro Volo a Vela Milan CVV Designer Ermenegildo Preti First flight April 1952 Number built 1Design and development editThe Pinocchio was designed at the Centro Volo a Vela CVV or Experimental Soaring Centre of the Royal Polytechnic of Milan by Gildo Preti in 1940 and its construction was started but then interrupted by World War II In 1946 students began its completion though it was not finished until 1951 and first flew in April 1952 at Linate piloted by Riccardo Brigliadori 1 For an all wood aircraft the Pinocchio had a high aspect ratio wing cantilevered straight tapered on both edges and with semi elliptical tips This was built around a single spar with a plywood skinned D box ahead of it and fabric covering behind Ailerons reached from the tips to about half span and inboard of them there were airbrakes mounted at mid chord which extended above and below the wings 1 The Pinocchio was a high wing aircraft with the wing mounted on top of the rear fuselage This was slender circular in cross section and plywood skinned The cockpit with a frameless canopy was placed immediately ahead of the wing leading edge its top level with the wing s upper surface Without a landing skid the Pinocchio landed on a retractable sprung monowheel and tail bumper Its horizontal tail was mounted on top of the fuselage far enough forward to place the trailing edges of the fabric covered elevators at the rudder hinge The fin was straight edged and small but the rudder was full curved and balanced 1 Only one Pinocchio was built 1 Specifications editData from Italian Vintage Sailplanes 1 General characteristicsCrew One Length 7 75 m 25 ft 5 in Wingspan 18 50 m 60 ft 8 in Wing area 18 m2 190 sq ft Aspect ratio 19 Airfoil root NACA 4415 tip NACA 2R12 sic 2 Empty weight 222 kg 489 lb Gross weight 320 kg 705 lb Performance Maximum glide ratio estimated 33 1 Wing loading 17 80 kg m2 3 65 lb sq ft References edit a b c d e Pedrielli Vincenzo Camastra Francesco 2011 Italian Vintage Sailplanes Konigswinter EQIP Werbung amp Verlag GmbH pp 111 126 7 ISBN 978 3 9808838 9 4 Lednicer David The Incomplete Guide to Airfoil Usage m selig ae illinois edu Retrieved 16 April 2019 Portals nbsp Italy nbsp Companies nbsp Aviation Retrieved from https en wikipedia org w index php title CVV 7 Pinocchio amp oldid 1088122229, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.