Bogie

This article is about wheeled chassis for vehicles. For carriages, see railroad car. For other uses, see Bogie (disambiguation) and Bogey.

Not to be confused with Boogie or Bogi.

A bogie (/ˈboʊɡi/ BOH-ghee) (or truck in North American English) is a chassis or framework that carries a wheelset, attached to a vehicle—a modular subassembly of wheels and axles. Bogies take various forms in various modes of transport. A bogie may remain normally attached (as on many railroad cars and semi-trailers) or be quickly detachable (as the dolly in a road train or in railway bogie exchange); it may contain a suspension within it (as most rail and trucking bogies do), or be solid and in turn be suspended (as most bogies of tracked vehicles are); it may be mounted on a swivel, as traditionally on a railway carriage or locomotive, additionally jointed and sprung (as in the landing gear of an airliner), or held in place by other means (centreless bogies).

A railway bogie

In Scotland, the term is used for a child’s (usually home-made) wooden cart.

While bogie is the preferred spelling and first-listed variant in various dictionaries,^[1][2][3] bogey and bogy are also used.^[1][2]

Railway

A bogie in the UK, or a railroad truck, wheel truck, or simply truck in North America, is a structure underneath a railway vehicle (wagon, coach or locomotive) to which axles (and, hence, wheels) are attached through bearings. In Indian English, bogie may also refer to an entire railway carriage.^[4] In South Africa, the term bogie is often alternatively used to refer to a freight or goods wagon (shortened from bogie wagon).

 

The first rolling stock with a bogie, a locomotive built in 1832

The bogie was invented by John B. Jervis along with the 4-2-0 locomotive to support the smokebox on it in the early 1830s, but it didn't get accepted for decades. The first standard gauge British railway to build coaches with bogies, instead of rigidly mounted axles, was the Midland Railway in 1874.^[5]

Purpose

 

Bogies allow the wheelsets to more closely follow the direction of the rails when travelling around a curve in the railroad

 

Displacements of a bogie

Bogies serve a number of purposes:^[6]

• Support of the rail vehicle body
• Stability on both straight and curved track
• Improve ride quality by absorbing vibration and minimizing the impact of centrifugal forces when the train runs on curves at high speed
• Minimizing generation of track irregularities and rail abrasion

Usually, two bogies are fitted to each carriage, wagon or locomotive, one at each end. Another configuration is often used in articulated vehicles, which places the bogies (often Jacobs bogies) under the connection between the carriages or wagons.

Most bogies have two axles,^[6] but some cars designed for heavy loads have more axles per bogie. Heavy-duty cars may have more than two bogies using span bolsters to equalize the load and connect the bogies to the cars.

Usually, the train floor is at a level above the bogies, but the floor of the car may be lower between bogies, such as for a bilevel rail car to increase interior space while staying within height restrictions, or in easy-access, stepless-entry, low-floor trains.

Components

Main article: List of railroad truck parts

 

A diagram of an American-style truck showing the names of its parts and showing the journal boxes to be integral parts of the side frame^[7][8][9] The journal boxes house plain bearings

Key components of a bogie include:^[6]

• The bogie frame: This can be of inside frame type where the main frame and bearings are between the wheels, or (more commonly) of outside frame type where the main frame and bearings are outside the wheels.
• Suspension to absorb shocks between the bogie frame and the rail vehicle body. Common types are coil springs, leaf springs and rubber airbags.
• At least one wheelset, composed of an axle with bearings and a wheel at each end.
• The bolster, the main crossmember, connected to the bogie frame through the secondary suspension. The railway car is supported at the pivot point on the bolster.
• Axle box suspensions absorb shocks between the axle bearings and the bogie frame. The axle box suspension usually consists of a spring between the bogie frame and axle bearings to permit up-and-down movement, and sliders to prevent lateral movement. A more modern design uses solid rubber springs.
• Brake equipment: Two main types are used: brake shoes that are pressed against the tread of the wheel, and disc brakes and pads.
• In powered vehicles, some form of transmission, usually electrically powered traction motors with a single speed gearbox or a hydraulically powered torque converter.

The connections of the bogie with the rail vehicle allow a certain degree of rotational movement around a vertical axis pivot (bolster), with side bearers preventing excessive movement. More modern, bolsterless bogie designs omit these features, instead taking advantage of the sideways movement of the suspension to permit rotational movement.^[6]

Locomotives

Diesel and electric

Main articles: UIC classification of locomotive axle arrangements and AAR wheel arrangement

Modern diesel and electric locomotives are mounted on bogies. Those commonly used in the North America include Type A, Blomberg, HT-C and Flexicoil trucks.^[10]

Steam

On a steam locomotive, the leading and trailing wheels may be mounted on bogies like pony trucks or Bissel bogies. Articulated locomotives (e.g. Fairlie, Garratt or Mallet locomotives) have power bogies similar to those on diesel and electric locomotives.

Rollbock

Main articles: Rollbock and Transporter wagon

A rollbock is a specialized type of bogie that is inserted under the wheels of a rail wagon/car, usually to convert for another track gauge. Transporter wagons carry the same concept to the level of a flatcar specialized to take other cars as its load.

Archbar bogies

In archbar or diamond frame bogies, the side frames are fabricated rather than cast.

• Archbar bogie pool
•  

  Japanese archbar bogie with axleboxes

•  

  Diamond frame bogie, elliptical springs and American style journal boxes

•  

  Diamond frame bogie, coil springs and journal boxes

•  

  Archbar bogie with journal bearings in American style journal boxes, as used on some steam locomotive tenders. Archbar bogies (trucks) were also used on freight cars.

Tramway

Modern

 

Side view of a SEPTA K-Car bogie

Tram bogies are much simpler in design because of their axle load, and the tighter curves found on tramways mean tram bogies almost never have more than two axles. Furthermore, some tramways have steeper gradients and vertical, as well as horizontal, curves, which means tram bogies often need to pivot on the horizontal axis, as well.

Some articulated trams have bogies located under articulations, a setup referred to as a Jacobs bogie. Often, low-floor trams are fitted with nonpivoting bogies and many tramway enthusiasts see this as a retrograde step, as it leads to more wear of both track and wheels and also significantly reduces the speed at which a tram can round a curve.^[11]

Historic

In the past, many different types of bogie (truck) have been used under tramcars (e.g. Brill, Peckham, maximum traction). A maximum traction truck has one driving axle with large wheels and one nondriving axle with smaller wheels. The bogie pivot is located off-centre, so more than half the weight rests on the driving axle.

Hybrid systems

 

Mockup of the pneumatic bogie system of an MP 89 carriage used on the Meteor metro, showing the two special wheelsets^[12]

The retractable stadium roof on Toronto's Rogers Centre used modified off-the-shelf train bogies on a circular rail. The system was chosen for its proven reliability.

Rubber-tyred metro trains use a specialised version of railway bogies. Special flanged steel wheels are behind the rubber-tired running wheels, with additional horizontal guide wheels in front of and behind the running wheels, as well. The unusually large flanges on the steel wheels guide the bogie through standard railroad switches, and in addition keep the train from derailing in case the tires deflate.^[12]

Variable gauge axles

Main article: Variable gauge

To overcome breaks of gauge some bogies are being fitted with variable gauge axles (VGA) so that they can operate on two different gauges. These include the SUW 2000 system from ZNTK Poznań.

Cleminson system

The Cleminson system is not a true bogie, but serves a similar purpose. It was based on a patent of 1883 by James Cleminson,^[13] and was once popular on narrow-gauge rolling stock, e.g. on the Isle of Man and Manx Northern Railways. The vehicle would have three axles and the outer two could pivot to adapt to curvature of the track. The pivoting was controlled by levers attached to the third (centre) axle, which could slide sideways.^[14]

Tracked vehicles

Some tanks and other tracked vehicles have bogies as external suspension components (see armoured fighting vehicle suspension). This type of bogie usually has two or more road wheels and some type of sprung suspension to smooth the ride across rough terrain. Bogie suspensions keep much of their components on the outside of the vehicle, saving internal space. Although vulnerable to antitank fire, they can often be repaired or replaced in the field.

Articulated bogie

 

Articulated bogie on an NCTD Sprinter Siemens Desiro VT642

An articulated bogie is any one of a number of bogie designs that allow railway equipment to safely turn sharp corners, while reducing or eliminating the "screeching" normally associated with metal wheels rounding a bend in the rails. There are a number of such designs, and the term is also applied to train sets that incorporate articulation in the vehicle, as opposed to the bogies themselves.

If one considers a single bogie "up close", it resembles a small rail car with axles at either end. The same effect that causes the bogies to rub against the rails at longer radius causes each of the pairs of wheels to rub on the rails and cause the screeching. Articulated bogies add a second pivot point between the two axles (wheelsets) to allow them to rotate to the correct angle even in these cases.

Articulated lorries (tractor-trailers)

In trucking, a bogie is the subassembly of axles and wheels that supports a semi-trailer, whether permanently attached to the frame (as on a single trailer) or making up the dolly that can be hitched and unhitched as needed when hitching up a second or third semi-trailer (as when pulling doubles or triples).

Bogie (aircraft)

Main article: Landing gear

Radial steering truck

Radial steering trucks, also known as radial bogies, allow the individual axles to align with curves in addition to the bogie frame as a whole pivoting. For non-radial bogies, the more axles in the assembly, the more difficulty it has negotiating curves, due to wheel flange to rail friction. For radial bogies, the wheel sets actively "steer" through curves, thus reducing wear at the wheel flange to rail interface and improving adhesion.

In the USA, this has been implemented for locomotives both by EMD and GE. The EMD version, designated HTCR, was made standard equipment for the SD70 series, first sold in 1993. However, the HTCR in actual operation had mixed results and relatively high purchase and maintenance costs. Thus EMD introduced the HTSC truck in 2003, which basically is the HTCR stripped of radial components. GE introduced their version in 1995 as a buyer option for the AC4400CW and later Evolution Series locomotives. However it also met with limited acceptance due to relatively high purchase and maintenance costs, and customers have generally chosen GE Hi-Ad standard trucks for newer and rebuilt locomotives.

•  

  EMD HTCR radial steering trucks on an EMD SD9043MAC

•  

  GE radial steering trucks on a GE AC4400CW

See also

Articles on bogies and trucks

• Arnoux system
• Bissel bogie
• Blomberg B
• Gölsdorf axle
• ICF Bogie
• Jacobs bogie
• Krauss-Helmholtz bogie
• Lateral motion device
• Mason Bogie
• Pony truck
• Rocker-bogie
• Scheffel bogie
• Schwartzkopff-Eckhardt II bogie
• Syntegra

Related topics

• Caster
• Dolly
• Flange
• List of railroad truck parts
• Luttermöller axle
• Road–rail vehicle
• Skateboard truck
• Spring (device)
• Timmis system, an early form of coil spring used on railway axles.
• Trailing wheel
• Wheel arrangement
• Wheelbase
• Wheelset

References

1. Merriam-Webster, Merriam-Webster's Collegiate Dictionary, Merriam-Webster.
2. Houghton Mifflin Harcourt, (5th ed.), Houghton Mifflin Harcourt, archived from the original on 2015-07-14, retrieved 2014-11-24.
3. Oxford Dictionaries Online, , Oxford University Press, archived from the original on 2014-12-02.
4. . www.oxfordadvancedlearnersdictionary.com. Archived from the original on 2011-08-07. Retrieved 8 May 2018.
5. Jenkinson, David (1988). British Railway Carriages of the 20th Century - Volume 1: The end of an era, 1901-22. London: Guild Publishing. p. 10. CN 8130.
6. Isao Okamoto (December 1998). (PDF). Japan Railway & Transport Review (18): 52–61. Archived from the original (PDF) on 2007-09-27. Retrieved 2018-11-30.
7. "Bogie truck for railway and like vehicles". google.com. from the original on 8 May 2018. Retrieved 8 May 2018.
8. . ColumbusCastings.com. Columbus, Ohio: Columbus Castings. Archived from the original on 2014-10-19. Retrieved 19 November 2014.
9. (PDF). SCTCO.com. Standard Car Truck Company. January 2000. Archived from the original (PDF) on 4 March 2016. Retrieved 19 November 2014.
10. "trucks". www.hosam.com. from the original on 9 April 2016. Retrieved 8 May 2018.
11. (PDF). Archived from the original (PDF) on 2011-07-18. Retrieved 2010-05-12.
12. Dery, Bernard. "Truck (bogie) - Visual Dictionary". www.infovisual.info. from the original on 16 June 2016. Retrieved 8 May 2018.
13. "Obituary. James Lyons-Cleminson, 1840-1896". Minutes of the Proceedings of the Institution of Civil Engineers. ICE Virtual Library. 127 (1897): 379–380. 1897. doi:10.1680/imotp.1897.19461. Retrieved 2022-01-28.
14. "Cleminson flexible six-wheeled waggon - Festipedia". www.festipedia.org.uk. from the original on 17 March 2016. Retrieved 8 May 2018.

Further reading

• Baur, Karl Gerhard (2006). Drehgestelle - Bogies. Freiburg i.B.: EK-Verlag. ISBN 978-3-88255-147-1. (in German and English)

External links

 

Wikimedia Commons has media related to Bogie.

 

Look up bogie in Wiktionary, the free dictionary.

• "Bogie" . Encyclopædia Britannica. Vol. 4 (11th ed.). 1911.
• Truck (bogie) with tyres
• Bogies/Trucks
• Suspension systems
• Locomotive’s Bogies & Components