fbpx
Wikipedia

Universal Power Adapter for Mobile Devices

The Universal Power Adapter for Mobile Devices (UPAMD), codename IEEE 1823-2015 (before approval P1823), is an IEEE standard for power supply design intended to cater to the power range of 10–130 W (optionally 240 W) for mobile devices like laptop computers. The power supply was required to have an output capacitive energy of less than 15.1 µJ and an inductive energy at disconnect of less than 5.3 µJ.[1]

Universal Power Adapter for Mobile Devices
Type Power Adapter
Production history
Designer IEEE UPAMD Working Group
Hot pluggable Yes
Daisy chain Yes
Electrical
Signal charging power 10–240 W

The standard defines an AC adapter to power devices requiring from 10 W to 130 W (~20 V × 6.5 A) or (extended voltage option) up to 240 W (60 V × 4 A).[2] A new connector (that does not mate with any previously existing connector) is proposed for a lifetime of about ten years with multiple brands and models.[3] This minimum life of adapter was hoped to reduce electronic waste.[4][5]

A common direct current power plug is intended to make life easier by eliminating the confusion regarding what voltage and current transformer one needs to buy and carry.[6] This can help mobile devices, laptops, many consumer electronic devices, office devices like Ethernet switches/hubs, and wireless routers to use the same power adapter around the world.

This specification defines a communication channel between device and adapter, to negotiate the requirements and supply.

Usage

There seem to be no known examples of commercial deployments of UPAMD in end-user devices. When asked about deployment in 2019, the chair for IEEE 1823 working group wrote the following:

Currently the IT market which 1823 standard was originally intended had been swayed by USB SIG to use type C connector as alternatives. However, EU standard body had made inquiry to see if 1823 should be considered as the preferred connector for the next generation of mobile devices. Also, there are new interests from some automotive industry players that are looking at distributing DC bus inside a car (obvious that 1823 with CAN Bus as control method is preferred than USB type C which was not designed for harsh environment).

As for commercial deployment, unfortunately I don’t have a definite answer for you. Several power supply vendor in Asia had made prototypes about 2 years ago but I did not get any further updates after that.

— Leonard Tsai, "Status for Universal Power Adapter for Mobile Devices (2019)".

History

The Standards Association of the Institute of Electrical and Electronics Engineers (IEEE) approved the Universal Power Adapter for Mobile Devices working group on June 17, 2010.[7] The project was sponsored by the Microprocessor Standards Committee of the IEEE Computer Society.

On 15 May 2015 the standard was published as IEEE Std 1823-2015.[8]

See also

  • USB Power Delivery Rev. 3.1 - includes Standard Power Range (SPR) mode with up to 100 W of power (20 V @ 4 A) and Extended Power Range (EPR) mode with up to 240 W of power (48 V @ 5 A)
  • IEC 62700 "IEC Technical Specification 62700: DC Power supply for notebook computer"
  • Common external power supply for smartphones (EN 62684:2010 / IEC 62684:2011)

References

  1. ^ Bob Davis (March 17, 2011). "UPAMD Low Energy Connect and Disconnect" (PDF). IEEE. Retrieved August 31, 2013. The UPAMD power source, and cable, plus 2 connectors, must have a stored capacitive energy of less than 15.1uJ and a voltage of less than 17V. The stored inductive energy at the time of disconnect should be less than 5.3uJ.
  2. ^ "UPAMD™ / P1823™, Universal Power Adapter for Mobile Devices". IEEE Standards Association. 2010-06-19. Retrieved 2013-03-17.
  3. ^ "UPAMD/P1823 General Goals" (PDF). IEEE UPAMD/P1823 working group. April 26, 2011. Retrieved August 23, 2011.
  4. ^ "Green Plug Lauds Industry Effort to Drive Standards For Smart Power Adapters". News release. Green Plug. October 12, 2010. Retrieved August 23, 2011.
  5. ^ Yen-Shyang Hwang, Taipei; Willie Teng (July 5, 2010). "Taiwan notebook companies support PSU standardization". Digi Times. Retrieved August 31, 2013.
  6. ^
  7. ^ "Project Authorization Request for a New IEEE Standard" (PDF). June 17, 2010. Retrieved August 23, 2011.
  8. ^ IEEE Standard for Universal Power Adapter for Mobile Devices. doi:10.1109/IEEESTD.2015.7106444. ISBN 978-0-7381-9608-4.

External links

  • IEEE 1823-2015 - IEEE Standard for Universal Power Adapter for Mobile Devices - IEEE

universal, power, adapter, mobile, devices, upamd, codename, ieee, 1823, 2015, before, approval, p1823, ieee, standard, power, supply, design, intended, cater, power, range, optionally, mobile, devices, like, laptop, computers, power, supply, required, have, o. The Universal Power Adapter for Mobile Devices UPAMD codename IEEE 1823 2015 before approval P1823 is an IEEE standard for power supply design intended to cater to the power range of 10 130 W optionally 240 W for mobile devices like laptop computers The power supply was required to have an output capacitive energy of less than 15 1 µJ and an inductive energy at disconnect of less than 5 3 µJ 1 Universal Power Adapter for Mobile DevicesTypePower AdapterProduction historyDesignerIEEE UPAMD Working GroupHot pluggableYesDaisy chainYesElectricalSignalcharging power 10 240 WThe standard defines an AC adapter to power devices requiring from 10 W to 130 W 20 V 6 5 A or extended voltage option up to 240 W 60 V 4 A 2 A new connector that does not mate with any previously existing connector is proposed for a lifetime of about ten years with multiple brands and models 3 This minimum life of adapter was hoped to reduce electronic waste 4 5 A common direct current power plug is intended to make life easier by eliminating the confusion regarding what voltage and current transformer one needs to buy and carry 6 This can help mobile devices laptops many consumer electronic devices office devices like Ethernet switches hubs and wireless routers to use the same power adapter around the world This specification defines a communication channel between device and adapter to negotiate the requirements and supply Contents 1 Usage 2 History 3 See also 4 References 5 External linksUsage EditThere seem to be no known examples of commercial deployments of UPAMD in end user devices When asked about deployment in 2019 the chair for IEEE 1823 working group wrote the following Currently the IT market which 1823 standard was originally intended had been swayed by USB SIG to use type C connector as alternatives However EU standard body had made inquiry to see if 1823 should be considered as the preferred connector for the next generation of mobile devices Also there are new interests from some automotive industry players that are looking at distributing DC bus inside a car obvious that 1823 with CAN Bus as control method is preferred than USB type C which was not designed for harsh environment As for commercial deployment unfortunately I don t have a definite answer for you Several power supply vendor in Asia had made prototypes about 2 years ago but I did not get any further updates after that Leonard Tsai Status for Universal Power Adapter for Mobile Devices 2019 History EditThe Standards Association of the Institute of Electrical and Electronics Engineers IEEE approved the Universal Power Adapter for Mobile Devices working group on June 17 2010 7 The project was sponsored by the Microprocessor Standards Committee of the IEEE Computer Society On 15 May 2015 the standard was published as IEEE Std 1823 2015 8 See also EditUSB Power Delivery Rev 3 1 includes Standard Power Range SPR mode with up to 100 W of power 20 V 4 A and Extended Power Range EPR mode with up to 240 W of power 48 V 5 A IEC 62700 IEC Technical Specification 62700 DC Power supply for notebook computer Common external power supply for smartphones EN 62684 2010 IEC 62684 2011 References Edit Bob Davis March 17 2011 UPAMD Low Energy Connect and Disconnect PDF IEEE Retrieved August 31 2013 The UPAMD power source and cable plus 2 connectors must have a stored capacitive energy of less than 15 1uJ and a voltage of less than 17V The stored inductive energy at the time of disconnect should be less than 5 3uJ UPAMD P1823 Universal Power Adapter for Mobile Devices IEEE Standards Association 2010 06 19 Retrieved 2013 03 17 UPAMD P1823 General Goals PDF IEEE UPAMD P1823 working group April 26 2011 Retrieved August 23 2011 Green Plug Lauds Industry Effort to Drive Standards For Smart Power Adapters News release Green Plug October 12 2010 Retrieved August 23 2011 Yen Shyang Hwang Taipei Willie Teng July 5 2010 Taiwan notebook companies support PSU standardization Digi Times Retrieved August 31 2013 IEEE plans to end the power adapter plague Project Authorization Request for a New IEEE Standard PDF June 17 2010 Retrieved August 23 2011 IEEE Standard for Universal Power Adapter for Mobile Devices doi 10 1109 IEEESTD 2015 7106444 ISBN 978 0 7381 9608 4 External links EditIEEE 1823 2015 IEEE Standard for Universal Power Adapter for Mobile Devices IEEE Retrieved from https en wikipedia org w index php title Universal Power Adapter for Mobile Devices amp oldid 1117664593, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.