fbpx
Wikipedia

Maximum elevation figure

Maximum elevation figure (MEF) is a type of visual flight rule (VFR) information that indicates the elevation of the highest geographical feature within a GEOREF quadrangle area. It is of interest to pilots, who want to be aware of the highest mountain peaks and tall towers nearby, so that they can fly above them to avoid controlled flight into terrain. ("Features" includes terrain, trees, towers, and other obstacles.)

MEF's of 4700 and 3300 feet are shown on this excerpt from the FAA's Los Angeles sectional aeronautical chart.

Much like the minimum safe altitude (MSA) used for flight under instrument flight rules, the MEF includes a margin for aircraft clearance above the terrain and altimeter error.[1]

In a VFR flight, the MEF is commonly referred to as a "quadrantal altitude" (not to be confused with an IFR minimum sector altitude).[clarification needed]

United States

In the US, the Federal Aviation Administration issues sectional charts. Each rectangular area covering one degree of latitude and one degree of longitude is divided into four smaller areas called quadrangles (in accordance with the World Geographic Reference System, or GEOREF), each spanning half a degree of latitude and half a degree of longitude. Each quadrangle has its MEF printed in it in thousands and hundreds of feet above mean sea level. For example, 105, means that the highest elevation is 10,500 feet within that quadrangle.

MEFs are determined by taking the highest of the following: 1) The point of highest terrain within a quadrangle, adding 200 ft for obstacles which are not required to be portrayed, and then adding 100 feet for vertical error and then rounding up to the next hundred feet; or 2) The height of the highest manmade obstacle in the quadrangle, adding 100 feet for vertical error and then rounding up to the next hundred feet.[2]

Canadian VNCs

The MEF on Canadian VFR navigation charts is calculated by taking the higher value of:

  • the top elevation of the highest obstacle plus the vertical accuracy (a variable number of feet) of the terrain source data; or
  • the elevation of the highest terrain plus 328 feet plus the vertical accuracy variable of the terrain source data.[1]

Australia

In Australia, Visual Navigation Charts (VNCs) and Visual Terminal Charts (VTCs) usually indicate MEF information by use of bold elevation figures for each grid. Pilots are also required to ensure their planned route does not contravene the minimum flying altitude regulations contained in CAR 167. This restriction is normally 1000FT above populated or built-up areas and 500FT elsewhere.

Procedures are different when flights are conducted under IFR, where LSALT is commonly used. LSALT may be determined in a number of ways as explained in the Australian Aeronautical Information Publication or AIP.

See also

References

  1. ^ a b Aeronautical Information Circular 26/11 VFR Navigation Charts—Clarification of the Maximum Elevation Figure
  2. ^ "Aeronautical Chart User's Guide" (PDF). Federal Aviation Administration. Retrieved 30 November 2021.{{cite web}}: CS1 maint: url-status (link)


maximum, elevation, figure, confused, with, area, minimum, altitude, this, article, needs, additional, citations, verification, please, help, improve, this, article, adding, citations, reliable, sources, unsourced, material, challenged, removed, find, sources,. Not to be confused with Area minimum altitude This article needs additional citations for verification Please help improve this article by adding citations to reliable sources Unsourced material may be challenged and removed Find sources Maximum elevation figure news newspapers books scholar JSTOR December 2008 Learn how and when to remove this template message Maximum elevation figure MEF is a type of visual flight rule VFR information that indicates the elevation of the highest geographical feature within a GEOREF quadrangle area It is of interest to pilots who want to be aware of the highest mountain peaks and tall towers nearby so that they can fly above them to avoid controlled flight into terrain Features includes terrain trees towers and other obstacles MEF s of 4700 and 3300 feet are shown on this excerpt from the FAA s Los Angeles sectional aeronautical chart Much like the minimum safe altitude MSA used for flight under instrument flight rules the MEF includes a margin for aircraft clearance above the terrain and altimeter error 1 In a VFR flight the MEF is commonly referred to as a quadrantal altitude not to be confused with an IFR minimum sector altitude clarification needed Contents 1 United States 2 Canadian VNCs 3 Australia 4 See also 5 ReferencesUnited States EditIn the US the Federal Aviation Administration issues sectional charts Each rectangular area covering one degree of latitude and one degree of longitude is divided into four smaller areas called quadrangles in accordance with the World Geographic Reference System or GEOREF each spanning half a degree of latitude and half a degree of longitude Each quadrangle has its MEF printed in it in thousands and hundreds of feet above mean sea level For example 105 means that the highest elevation is 10 500 feet within that quadrangle MEFs are determined by taking the highest of the following 1 The point of highest terrain within a quadrangle adding 200 ft for obstacles which are not required to be portrayed and then adding 100 feet for vertical error and then rounding up to the next hundred feet or 2 The height of the highest manmade obstacle in the quadrangle adding 100 feet for vertical error and then rounding up to the next hundred feet 2 Canadian VNCs EditThe MEF on Canadian VFR navigation charts is calculated by taking the higher value of the top elevation of the highest obstacle plus the vertical accuracy a variable number of feet of the terrain source data or the elevation of the highest terrain plus 328 feet plus the vertical accuracy variable of the terrain source data 1 Australia EditIn Australia Visual Navigation Charts VNCs and Visual Terminal Charts VTCs usually indicate MEF information by use of bold elevation figures for each grid Pilots are also required to ensure their planned route does not contravene the minimum flying altitude regulations contained in CAR 167 This restriction is normally 1000FT above populated or built up areas and 500FT elsewhere Procedures are different when flights are conducted under IFR where LSALT is commonly used LSALT may be determined in a number of ways as explained in the Australian Aeronautical Information Publication or AIP See also EditMinimum safe altitude for IFR flight including area minimum altitudes AMA References Edit a b Aeronautical Information Circular 26 11 VFR Navigation Charts Clarification of the Maximum Elevation Figure Aeronautical Chart User s Guide PDF Federal Aviation Administration Retrieved 30 November 2021 a href Template Cite web html title Template Cite web cite web a CS1 maint url status link This aviation related article is a stub You can help Wikipedia by expanding it vte This cartography or mapping term article is a stub You can help Wikipedia by expanding it vte Retrieved from https en wikipedia org w index php title Maximum elevation figure amp oldid 1110536324, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.