Electric field

"Electric fields" redirects here. For the Australian band, see Electric Fields.

An electric field (sometimes E-field^[1]) is the physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them.^[2] It also refers to the physical field for a system of charged particles.^[3] Electric fields originate from electric charges and time-varying electric currents. Electric fields and magnetic fields are both manifestations of the electromagnetic field, one of the four fundamental interactions (also called forces) of nature.

Electric field
Effects of an electric field. The girl is touching an electrostatic generator, which charges her body with a high voltage. Her hair, which is charged with the same polarity, is repelled by the electric field of her head and stands out from her head.
Common symbols	E
SI unit	volt per meter (V/m)
In SI base units	m⋅kg⋅s^−3⋅A^−1

Electric fields are important in many areas of physics, and are exploited in electrical technology. In atomic physics and chemistry, for instance, the electric field is the attractive force holding the atomic nucleus and electrons together in atoms. It is also the force responsible for chemical bonding between atoms that result in molecules.

The electric field is defined as a vector field that associates to each point in space the electrostatic (Coulomb) force per unit of charge exerted on an infinitesimal positive test charge at rest at that point.^[4][5][6] The derived SI unit for the electric field is the volt per meter (V/m), which is equal to the newton per coulomb (N/C).^[7]

Description

 

Electric field of a positive point electric charge suspended over an infinite sheet of conducting material. The field is depicted by electric field lines, lines which follow the direction of the electric field in space.

The electric field is defined at each point in space as the force per unit charge that would be experienced by a vanishingly small positive test charge if held stationary at that point.^{[8]: 469–70} As the electric field is defined in terms of force, and force is a vector (i.e. having both magnitude and direction), it follows that an electric field is a vector field.^{[8]: 469–70} Fields that may be defined in this manner are sometimes referred to as force fields. The electric field acts between two charges similarly to the way the gravitational field acts between two masses, as they both obey an inverse-square law with distance.^[9] This is the basis for Coulomb's law, which states that, for stationary charges, the electric field varies with the source charge and varies inversely with the square of the distance from the source. This means that if the source charge were doubled, the electric field would double, and if you move twice as far away from the source, the field at that point would be only one-quarter its original strength.

The electric field can be visualized with a set of lines whose direction at each point is the same as the field's, a concept introduced by Michael Faraday,^[10] whose term 'lines of force' is still sometimes used. This illustration has the useful property that the field's strength is proportional to the density of the lines.^[11] Field lines due to stationary charges have several important properties, including always originating from positive charges and terminating at negative charges, they enter all good conductors at right angles, and they never cross or close in on themselves.^[8]: 479 The field lines are a representative concept; the field actually permeates all the intervening space between the lines. More or fewer lines may be drawn depending on the precision to which it is desired to represent the field.^[10] The study of electric fields created by stationary charges is called electrostatics.

Faraday's law describes the relationship between a time-varying magnetic field and the electric field. One way of stating Faraday's law is that the curl of the electric field is equal to the negative time derivative of the magnetic field.^[12]: 327 In the absence of time-varying magnetic field, the electric field is therefore called conservative (i.e. curl-free).^{[12]: 24, 90–91} This implies there are two kinds of electric fields: electrostatic fields and fields arising from time-varying magnetic fields.^{[12]: 305–307} While the curl-free nature of the static electric field allows for a simpler treatment using electrostatics, time-varying magnetic fields are generally treated as a component of a unified electromagnetic field. The study of time varying magnetic and electric fields is called electrodynamics.

Mathematical formulation

Main article: Mathematical descriptions of the electromagnetic field

Electric fields are caused by electric charges, described by Gauss's law,^[13] and time varying magnetic fields, described by Faraday's law of induction.^[14] Together, these laws are enough to define the behavior of the electric field. However, since the magnetic field is described as a function of electric field, the equations of both fields are coupled and together form Maxwell's equations that describe both fields as a function of charges and currents.

 

Evidence of an electric field: styrofoam peanuts clinging to a cat's fur due to static electricity. The triboelectric effect causes an electrostatic charge to build up on the fur due to the cat's motions. The electric field of the charge causes polarization of the molecules of the styrofoam due to electrostatic induction, resulting in a slight attraction of the light plastic pieces to the charged fur. This effect is also the cause of static cling in clothes.

Electrostatics

Main article: Coulomb's law

In the special case of a steady state (stationary charges and currents), the Maxwell-Faraday inductive effect disappears. The resulting two equations (Gauss's law ${\displaystyle \nabla \cdot \mathbf {E} ={\frac {\rho }{\varepsilon _{0}}}}$  and Faraday's law with no induction term ${\displaystyle \nabla \times \mathbf {E} =0}$ ), taken together, are equivalent to Coulomb's law, which states that a particle with electric charge ${\displaystyle q_{1}}$  at position ${\displaystyle \mathbf {x} _{1}}$  exerts a force on a particle with charge ${\displaystyle q_{0}}$  at position ${\displaystyle \mathbf {x} _{0}}$  of:^[15]

$${\displaystyle \mathbf {F} ={\frac {1}{4\pi \varepsilon _{0}}}{\frac {q_{1}q_{0}}{(\mathbf {x} _{1}-\mathbf {x} _{0})^{2}}}{\hat {\mathbf {r} }}_{1,0}\,,}$$

 

where ${\displaystyle {\hat {\mathbf {r} }}_{1,0}}$  is the unit vector in the direction from point ${\displaystyle \mathbf {x} _{1}}$  to point ${\displaystyle \mathbf {x} _{0}}$ , and ε₀ is the electric constant (also known as "the absolute permittivity of free space") with the unit C²⋅m⁻²⋅N⁻¹.

Note that ${\displaystyle \varepsilon _{0}}$ , the vacuum electric permittivity, must be substituted with ${\displaystyle \varepsilon }$ , permittivity, when charges are in non-empty media. When the charges ${\displaystyle q_{0}}$  and ${\displaystyle q_{1}}$  have the same sign this force is positive, directed away from the other charge, indicating the particles repel each other. When the charges have unlike signs the force is negative, indicating the particles attract. To make it easy to calculate the Coulomb force on any charge at position ${\displaystyle \mathbf {x} _{0}}$  this expression can be divided by ${\displaystyle q_{0}}$  leaving an expression that only depends on the other charge (the source charge)^[16][6]

$${\displaystyle \mathbf {E} (\mathbf {x} _{0})={\frac {\mathbf {F} }{q_{0}}}={\frac {1}{4\pi \varepsilon _{0}}}{\frac {q_{1}}{(\mathbf {x} _{1}-\mathbf {x} _{0})^{2}}}{\hat {\mathbf {r} }}_{1,0}}$$

 

This is the electric field at point ${\displaystyle \mathbf {x} _{0}}$  due to the point charge ${\displaystyle q_{1}}$ ; it is a vector-valued function equal to the Coulomb force per unit charge that a positive point charge would experience at the position ${\displaystyle \mathbf {x} _{0}}$ . Since this formula gives the electric field magnitude and direction at any point ${\displaystyle \mathbf {x} _{0}}$  in space (except at the location of the charge itself, ${\displaystyle \mathbf {x} _{1}}$ , where it becomes infinite) it defines a vector field. From the above formula it can be seen that the electric field due to a point charge is everywhere directed away from the charge if it is positive, and toward the charge if it is negative, and its magnitude decreases with the inverse square of the distance from the charge.

The Coulomb force on a charge of magnitude ${\displaystyle q}$  at any point in space is equal to the product of the charge and the electric field at that point

$${\displaystyle \mathbf {F} =q\mathbf {E} }$$

 

The SI unit of the electric field is the newton per coulomb (N/C), or volt per meter (V/m); in terms of the SI base units it is kg⋅m⋅s⁻³⋅A⁻¹.

Superposition principle

Due to the linearity of Maxwell's equations, electric fields satisfy the superposition principle, which states that the total electric field, at a point, due to a collection of charges is equal to the vector sum of the electric fields at that point due to the individual charges.^[6] This principle is useful in calculating the field created by multiple point charges. If charges ${\displaystyle q_{1},q_{2},\dots ,q_{n}}$  are stationary in space at points ${\displaystyle \mathbf {x} _{1},\mathbf {x} _{2},\dots ,\mathbf {x} _{n}}$ , in the absence of currents, the superposition principle says that the resulting field is the sum of fields generated by each particle as described by Coulomb's law:

$${\displaystyle {\begin{aligned}\mathbf {E} (\mathbf {x} )&=\mathbf {E} _{1}(\mathbf {x} )+\mathbf {E} _{2}(\mathbf {x} )+\mathbf {E} _{3}(\mathbf {x} )+\cdots \\[2pt]&={1 \over 4\pi \varepsilon _{0}}{q_{1} \over (\mathbf {x} _{1}-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}_{1}+{1 \over 4\pi \varepsilon _{0}}{q_{2} \over (\mathbf {x} _{2}-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}_{2}+{1 \over 4\pi \varepsilon _{0}}{q_{3} \over (\mathbf {x} _{3}-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}_{3}+\cdots \\[2pt]&={1 \over 4\pi \varepsilon _{0}}\sum _{k=1}^{N}{q_{k} \over (\mathbf {x} _{k}-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}_{k}\end{aligned}}}$$

 

where ${\displaystyle \mathbf {{\hat {r}}_{k}} }$  is the unit vector in the direction from point ${\displaystyle \mathbf {x} _{k}}$  to point ${\displaystyle \mathbf {x} }$ .

Continuous charge distributions

The superposition principle allows for the calculation of the electric field due to a continuous distribution of charge ${\displaystyle \rho (\mathbf {x} )}$  (where ${\displaystyle \rho }$  is the charge density in coulombs per cubic meter). By considering the charge ${\displaystyle \rho (\mathbf {x} ')dV}$  in each small volume of space ${\displaystyle dV}$  at point ${\displaystyle \mathbf {x} '}$  as a point charge, the resulting electric field, ${\displaystyle d\mathbf {E} (\mathbf {x} )}$ , at point ${\displaystyle \mathbf {x} }$  can be calculated as

$${\displaystyle d\mathbf {E} (\mathbf {x} )={\frac {1}{4\pi \varepsilon _{0}}}{\frac {\rho (\mathbf {x} ')dV}{(\mathbf {x} '-\mathbf {x} )^{2}}}{\hat {\mathbf {r} }}'}$$

 

where ${\displaystyle {\hat {\mathbf {r} }}'}$  is the unit vector pointing from ${\displaystyle \mathbf {x} '}$  to ${\displaystyle \mathbf {x} }$ . The total field is then found by "adding up" the contributions from all the increments of volume by integrating over the volume of the charge distribution ${\displaystyle V}$ :

$${\displaystyle \mathbf {E} (\mathbf {x} )={\frac {1}{4\pi \varepsilon _{0}}}\iiint _{V}\,{\rho (\mathbf {x} ')dV \over (\mathbf {x} '-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}'}$$

 

Similar equations follow for a surface charge with continuous charge distribution ${\displaystyle \sigma (\mathbf {x} )}$  where ${\displaystyle \sigma }$  is the charge density in coulombs per square meter

$${\displaystyle \mathbf {E} (\mathbf {x} )={\frac {1}{4\pi \varepsilon _{0}}}\iint _{S}\,{\sigma (\mathbf {x} ')dA \over (\mathbf {x} '-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}'}$$

 

and for line charges with continuous charge distribution ${\displaystyle \lambda (\mathbf {x} )}$  where ${\displaystyle \lambda }$  is the charge density in coulombs per meter.

$${\displaystyle \mathbf {E} (\mathbf {x} )={\frac {1}{4\pi \varepsilon _{0}}}\int _{P}\,{\lambda (\mathbf {x} ')dL \over (\mathbf {x} '-\mathbf {x} )^{2}}{\hat {\mathbf {r} }}'}$$

 

Electric potential

Main article: Electric potential

See also: Helmholtz decomposition and Conservative vector field § Irrotational vector fields

If a system is static, such that magnetic fields are not time-varying, then by Faraday's law, the electric field is curl-free. In this case, one can define an electric potential, that is, a function ${\displaystyle \Phi }$  such that ${\displaystyle \mathbf {E} =-\nabla \Phi }$ .^[17] This is analogous to the gravitational potential. The difference between the electric potential at two points in space is called the potential difference (or voltage) between the two points.

In general, however, the electric field cannot be described independently of the magnetic field. Given the magnetic vector potential, A, defined so that ${\displaystyle \mathbf {B} =\nabla \times \mathbf {A} }$ , one can still define an electric potential ${\displaystyle \Phi }$  such that:

$${\displaystyle \mathbf {E} =-\nabla \Phi -{\frac {\partial \mathbf {A} }{\partial t}}}$$

 

where ${\displaystyle \nabla \Phi }$  is the gradient of the electric potential and ${\displaystyle {\frac {\partial \mathbf {A} }{\partial t}}}$  is the partial derivative of A with respect to time.

Faraday's law of induction can be recovered by taking the curl of that equation ^[18]

$${\displaystyle \nabla \times \mathbf {E} =-{\frac {\partial (\nabla \times \mathbf {A} )}{\partial t}}=-{\frac {\partial \mathbf {B} }{\partial t}}}$$

 

which justifies, a posteriori, the previous form for E.

Continuous vs. discrete charge representation

Main article: Charge density

The equations of electromagnetism are best described in a continuous description. However, charges are sometimes best described as discrete points; for example, some models may describe electrons as point sources where charge density is infinite on an infinitesimal section of space.

A charge ${\displaystyle q}$  located at ${\displaystyle \mathbf {r} _{0}}$  can be described mathematically as a charge density ${\displaystyle \rho (\mathbf {r} )=q\delta (\mathbf {r} -\mathbf {r} _{0})}$ , where the Dirac delta function (in three dimensions) is used. Conversely, a charge distribution can be approximated by many small point charges.

Electrostatic fields

Main article: Electrostatics

 

Illustration of the electric field surrounding a positive (red) and a negative (blue) charge

Electrostatic fields are electric fields that do not change with time. Such fields are present when systems of charged matter are stationary, or when electric currents are unchanging. In that case, Coulomb's law fully describes the field.^[19]

Parallels between electrostatic and gravitational fields

Coulomb's law, which describes the interaction of electric charges:

$${\displaystyle \mathbf {F} =q\left({\frac {Q}{4\pi \varepsilon _{0}}}{\frac {\mathbf {\hat {r}} }{|\mathbf {r} |^{2}}}\right)=q\mathbf {E} }$$

 

is similar to Newton's law of universal gravitation:

$${\displaystyle \mathbf {F} =m\left(-GM{\frac {\mathbf {\hat {r}} }{|\mathbf {r} |^{2}}}\right)=m\mathbf {g} }$$

 

(where ${\textstyle \mathbf {\hat {r}} =\mathbf {\frac {r}{|r|}} }$ ).

This suggests similarities between the electric field E and the gravitational field g, or their associated potentials. Mass is sometimes called "gravitational charge".^[20]

Electrostatic and gravitational forces both are central, conservative and obey an inverse-square law.

Uniform fields

 

Illustration of the electric field between two parallel conductive plates of finite size (known as a parallel plate capacitor). In the middle of the plates, far from any edges, the electric field is very nearly uniform.

A uniform field is one in which the electric field is constant at every point. It can be approximated by placing two conducting plates parallel to each other and maintaining a voltage (potential difference) between them; it is only an approximation because of boundary effects (near the edge of the planes, electric field is distorted because the plane does not continue). Assuming infinite planes, the magnitude of the electric field E is:

$${\displaystyle E=-{\frac {\Delta V}{d}}}$$

 

where ΔV is the potential difference between the plates and d is the distance separating the plates. The negative sign arises as positive charges repel, so a positive charge will experience a force away from the positively charged plate, in the opposite direction to that in which the voltage increases. In micro- and nano-applications, for instance in relation to semiconductors, a typical magnitude of an electric field is in the order of 10⁶ V⋅m⁻¹, achieved by applying a voltage of the order of 1 volt between conductors spaced 1 µm apart.

Electrodynamic fields

 

The electric field (lines with arrows) of a charge (+) induces surface charges (red and blue areas) on metal objects due to electrostatic induction.

Main article: Lorentz force

See also: Electrodynamics and Electromagnetic field

Electrodynamic fields are electric fields which do change with time, for instance when charges are in motion. In this case, a magnetic field is produced in accordance with Ampère's circuital law (with Maxwell's addition), which, along with Maxwell's other equations, defines the magnetic field, ${\displaystyle \mathbf {B} }$ , in terms of its curl:

$${\displaystyle \nabla \times \mathbf {B} =\mu _{0}\left(\mathbf {J} +\varepsilon _{0}{\frac {\partial \mathbf {E} }{\partial t}}\right),}$$

 

where ${\displaystyle \mathbf {J} }$  is the current density, ${\displaystyle \mu _{0}}$  is the vacuum permeability, and ${\displaystyle \varepsilon _{0}}$  is the vacuum permittivity.

That is, both electric currents (i.e. charges in uniform motion) and the (partial) time derivative of the electric field directly contributes to the magnetic field. In addition, the Maxwell–Faraday equation states

$${\displaystyle \nabla \times \mathbf {E} =-{\frac {\partial \mathbf {B} }{\partial t}}.}$$

 

These represent two of Maxwell's four equations and they intricately link the electric and magnetic fields together, resulting in the electromagnetic field. The equations represent a set of four coupled multi-dimensional partial differential equations which, when solved for a system, describe the combined behavior of the electromagnetic fields. In general, the force experienced by a test charge in an electromagnetic field is given by the Lorentz force law:

$${\displaystyle \mathbf {F} =q\mathbf {E} +q\mathbf {v} \times \mathbf {B} }$$

 

Energy in the electric field

The total energy per unit volume stored by the electromagnetic field is^[21]

$${\displaystyle u_{\text{EM}}={\frac {\varepsilon }{2}}|\mathbf {E} |^{2}+{\frac {1}{2\mu }}|\mathbf {B} |^{2}}$$

 

where ε is the permittivity of the medium in which the field exists, ${\displaystyle \mu }$  its magnetic permeability, and E and B are the electric and magnetic field vectors.

As E and B fields are coupled, it would be misleading to split this expression into "electric" and "magnetic" contributions. In particular, an electrostatic field in any given frame of reference in general transforms into a field with a magnetic component in a relatively moving frame. Accordingly, decomposing the electromagnetic field into an electric and magnetic component is frame-specific, and similarly for the associated energy.

The total energy U_EM stored in the electromagnetic field in a given volume V is

$${\displaystyle U_{\text{EM}}={\frac {1}{2}}\int _{V}\left(\varepsilon |\mathbf {E} |^{2}+{\frac {1}{\mu }}|\mathbf {B} |^{2}\right)dV\,.}$$

 

The electric displacement field

Main article: electric displacement field

Definitive equation of vector fields

See also: Defining equation (physics) and List of electromagnetism equations

In the presence of matter, it is helpful to extend the notion of the electric field into three vector fields:^[22]

$${\displaystyle \mathbf {D} =\varepsilon _{0}\mathbf {E} +\mathbf {P} }$$

 

where P is the electric polarization – the volume density of electric dipole moments, and D is the electric displacement field. Since E and P are defined separately, this equation can be used to define D. The physical interpretation of D is not as clear as E (effectively the field applied to the material) or P (induced field due to the dipoles in the material), but still serves as a convenient mathematical simplification, since Maxwell's equations can be simplified in terms of free charges and currents.

Constitutive relation

Main article: Constitutive equation

The E and D fields are related by the permittivity of the material, ε.^[23][22]

For linear, homogeneous, isotropic materials E and D are proportional and constant throughout the region, there is no position dependence:

$${\displaystyle \mathbf {D} (\mathbf {r} )=\varepsilon \mathbf {E} (\mathbf {r} )}$$

 

For inhomogeneous materials, there is a position dependence throughout the material:^[24]

$${\displaystyle \mathbf {D} (\mathbf {r} )=\varepsilon (\mathbf {r} )\mathbf {E} (\mathbf {r} )}$$

 

For anisotropic materials the E and D fields are not parallel, and so E and D are related by the permittivity tensor (a 2nd order tensor field), in component form:

$${\displaystyle D_{i}=\varepsilon _{ij}E_{j}}$$

 

For non-linear media, E and D are not proportional. Materials can have varying extents of linearity, homogeneity and isotropy.

Relativistic Effects on electric field

Point charge in uniform motion

The invariance of the form of Maxwell's equations under Lorentz transformation can be used to derive the electric field of a uniformly moving point charge. The charge of a particle is considered frame invariant, as supported by experimental evidence.^[25] Alternatively the electric field of uniformly moving point charges can be derived from the Lorentz transformation of four-force experienced by test charges in the source's rest frame given by Coulomb's law and assigning electric field and magnetic field by their definition given by the form of Lorentz force.^[26] However the following equation is only applicable when no acceleration is involved in the particle's history where Coulomb's law can be considered or symmetry arguments can be used for solving Maxwell's equations in a simple manner. The electric field of such a uniformly moving point charge is hence given by:^[27]

$${\displaystyle \mathbf {E} ={\frac {q}{4\pi \epsilon _{0}r^{3}}}{\frac {1-\beta ^{2}}{(1-\beta ^{2}\sin ^{2}\theta )^{3/2}}}\mathbf {r} }$$

 

where ${\displaystyle q}$  is the charge of the point source, ${\displaystyle \mathbf {r} }$  is the position vector from the point source to the point in space, ${\displaystyle \beta }$  is the ratio of observed speed of the charge particle to the speed of light and ${\displaystyle \theta }$  is the angle between ${\displaystyle \mathbf {r} }$  and the observed velocity of the charged particle.

The above equation reduces to that given by Coulomb's law for non-relativistic speeds of the point charge. Spherically symmetry is not satisfied due to breaking of symmetry in the problem by specification of direction of velocity for calculation of field. To illustrate this, field lines of moving charges are sometimes represented as unequally spaced radial lines which would appear equally spaced in a co-moving reference frame.^[25]

Propagation of disturbances in electric fields

See also: Paradox of radiation of charged particles in a gravitational field

Special theory of relativity imposes the principle of locality, that requires cause and effect to be time-like separated events where the causal efficacy does not travel faster than the speed of light.^[28] Maxwell's laws are found to confirm to this view since the general solutions of fields are given in terms of retarded time which indicate that electromagnetic disturbances travel at the speed of light. Advanced time, which also provides a solution for Maxwell's law are ignored as an unphysical solution.

 

An illustrative example showing bremsstrahlung radiation: Field lines and modulus of the electric field generated by a (negative) charge first moving at a constant speed and then stopping quickly to show the electromagnetic wave generated and propagation of disturbances in electromagnetic field.

For the motion of a charged particle, considering for example the case of a moving particle with the above described electric field coming to an abrupt stop, the electric fields at points far from it do not immediately revert to that classically given for a stationary charge. On stopping, the field around the stationary points begin to revert to the expected state and this effect propagates outwards at the speed of light while the electric field lines far away from this will continue to point radially towards an assumed moving charge. This virtual particle will never be outside the range of propagation of the disturbance in electromagnetic field, since charged particles are restricted to have speeds slower than that of light, which makes it impossible to construct a Gaussian surface in this region that violates Gauss' law. Another technical difficulty that supports this is that charged particles travelling faster than or equal to speed of light no longer have a unique retarded time. Since electric field lines are continuous, an electromagnetic pulse of radiation is generated that connects at the boundary of this disturbance travelling outwards at the speed of light.^[29] In general, any accelerating point charge radiates electromagnetic waves however, non-radiating acceleration is possible in a systems of charges.

Arbitrarily moving point charge

See also: Jefimenko's equations § Heaviside–Feynman formula

For arbitrarily moving point charges, propagation of potential fields such as Lorenz gauge fields at the speed of light needs to be accounted for by using Liénard–Wiechert potential.^[30] Since the potentials satisfy Maxwell's equations, the fields derived for point charge also satisfy Maxwell's equations. The electric field is expressed as:^[31]

$${\displaystyle \mathbf {E} (\mathbf {r} ,\mathbf {t} )={\frac {1}{4\pi \varepsilon _{0}}}\left({\frac {q(\mathbf {n} _{s}-{\boldsymbol {\beta }}_{s})}{\gamma ^{2}(1-\mathbf {n} _{s}\cdot {\boldsymbol {\beta }}_{s})^{3}|\mathbf {r} -\mathbf {r} _{s}|^{2}}}+{\frac {q\mathbf {n} _{s}\times {\big (}(\mathbf {n} _{s}-{\boldsymbol {\beta }}_{s})\times {\dot {{\boldsymbol {\beta }}_{s}}}{\big )}}{c(1-\mathbf {n} _{s}\cdot {\boldsymbol {\beta }}_{s})^{3}|\mathbf {r} -\mathbf {r} _{s}|}}\right)_{t=t_{r}}}$$

 

where ${\displaystyle q}$  is the charge of the point source, ${\textstyle {t_{r}}}$  is retarded time or the time at which the source's contribution of the electric field originated, ${\textstyle {r}_{s}(t)}$  is the position vector of the particle, ${\textstyle {n}_{s}(\mathbf {r} ,t)}$  is a unit vector pointing from charged particle to the point in space, ${\textstyle {\boldsymbol {\beta }}_{s}(t)}$  is the velocity of the particle divided by the speed of light, and ${\textstyle \gamma (t)}$  is the corresponding Lorentz factor. The retarded time is given as solution of:

${\displaystyle t_{r}=\mathbf {t} -{\frac {|\mathbf {r} -\mathbf {r} _{s}(t_{r})|}{c}}}$ 

The uniqueness of solution for ${\textstyle {t_{r}}}$  for given ${\displaystyle \mathbf {t} }$ , ${\displaystyle \mathbf {r} }$  and ${\displaystyle r_{s}(t)}$  is valid for charged particles moving slower than speed of light. Electromagnetic radiation of accelerating charges is known to be caused by the acceleration dependent term in the electric field from which relativistic correction for Larmor formula is obtained.^[31]

There exist yet another set of solutions for Maxwell's equation of the same form but for advanced time ${\textstyle {t_{a}}}$  instead of retarded time given as a solution of:

${\displaystyle t_{a}=\mathbf {t} +{\frac {|\mathbf {r} -\mathbf {r} _{s}(t_{a})|}{c}}}$ 

Since the physical interpretation of this indicates that the electric field at a point is governed by the particle's state at a point of time in the future, it is considered as an unphysical solution and hence neglected. However, there have been theories exploring the advanced time solutions of Maxwell's equations, such as Feynman Wheeler absorber theory.

The above equation, although consistent with that of uniformly moving point charges as well as its non-relativistic limit, are not corrected for quantum-mechanical effects.

Some common electric field values

• Infinite wire having uniform charge density ${\displaystyle \lambda }$  has electric field at a distance ${\displaystyle x}$  from it as ${\displaystyle {\frac {2K\lambda }{x}}{\hat {x}}}$ 
• Infinitely large surface having charge density ${\displaystyle \sigma }$  has electric field at a distance ${\displaystyle x}$  from it as ${\displaystyle {\frac {\sigma }{2\epsilon _{0}}}{\hat {x}}}$ 
• Infinitely long cylinder having Uniform charge density ${\displaystyle \lambda }$  that is charge contained along unit length of the cylinder has electric field at a distance ${\displaystyle x}$  from it as ${\displaystyle {\frac {2K\lambda }{x}}{\hat {x}}}$  while it is ${\displaystyle 0}$  everywhere inside the cylinder
• Uniformly charged non-conducting sphere of radius ${\displaystyle R}$ , volume charge density ${\displaystyle \rho }$  and total charge ${\displaystyle Q}$  has electric field at a distance ${\displaystyle x}$  from it as ${\displaystyle {\frac {KQ}{x^{2}}}{\hat {x}}}$  while the electric field at a point ${\displaystyle {\vec {r}}}$  inside sphere from its center is given by ${\displaystyle {\frac {KQ}{R^{3}}}{\vec {r}}}$ 
• Uniformly charged conducting sphere of radius ${\displaystyle R}$ , surface charge density ${\displaystyle \sigma }$  and total charge ${\displaystyle Q}$  has electric field at a distance ${\displaystyle x}$  from it as ${\displaystyle {\frac {KQ}{x^{2}}}{\hat {x}}}$  while the electric field inside is ${\displaystyle 0}$ 
• Electric field infinitely close to a conducting surface in electrostatic equilibrium having charge density ${\displaystyle \sigma }$  at that point is ${\displaystyle {\frac {\sigma }{\epsilon _{0}}}{\hat {x}}}$ 
• Uniformly charged ring having total charge ${\displaystyle Q}$  has electric field at a distance ${\displaystyle x}$  along its axis as ${\displaystyle {\frac {KQx}{(R^{2}+x^{2})^{3/2}}}{\hat {x}}}$ '
• Uniformly charged disc of radius ${\displaystyle R}$  and charge density ${\displaystyle \sigma }$  has electric field at a distance ${\displaystyle x}$  along its axis from it as ${\displaystyle {\frac {\sigma }{2\epsilon _{0}}}\left[1-\left({\frac {R^{2}}{x^{2}}}-1\right)^{-1/2}\right]{\hat {x}}}$ 
• Electric field due to dipole of dipole moment ${\displaystyle {\vec {p}}}$  at a distance ${\displaystyle x}$  from their center along equatorial plane is given as ${\displaystyle -{\frac {K{\vec {p}}}{x^{3}}}}$  and the same along the axial line is approximated to ${\displaystyle {\frac {2K{\vec {p}}}{x^{3}}}}$  for ${\displaystyle x}$  much bigger than the distance between dipoles. Further generalization is given by multipole expansion.

See also

• Classical electromagnetism
• Relativistic electromagnetism
• Electricity
• History of electromagnetic theory
• Optical field
• Magnetism
• Teltron tube
• Teledeltos, a conductive paper that may be used as a simple analog computer for modelling fields

References

1. Roche, John (2016). "Introducing electric fields". Physics Education. 51 (5): 055005. Bibcode:2016PhyEd..51e5005R. doi:10.1088/0031-9120/51/5/055005. S2CID 125014664.
2. Browne, p 225: "... around every charge there is an aura that fills all space. This aura is the electric field due to the charge. The electric field is a vector field... and has a magnitude and direction."
3. Purcell, Edward M.; Morin, David J. (2013). Electricity and Magnetism (3rd ed.). New York: Cambridge University Press. pp. 16–20. ISBN 978-1-107-01402-2.
4. Feynman, Richard (1970). The Feynman Lectures on Physics Vol II. Addison Wesley Longman. pp. 1–3, 1–4. ISBN 978-0-201-02115-8.
5. Purcell, Edward M.; Morin, David J. (2013). Electricity and Magnetism (3rd ed.). New York: Cambridge University Press. pp. 15–16. ISBN 978-1-107-01402-2.
6. Serway, Raymond A.; Vuille, Chris (2014). College Physics (10th ed.). Cengage Learning. pp. 532–533. ISBN 978-1305142824.
7. Le Système international d’unités [The International System of Units] (PDF) (in French and English) (9th ed.), International Bureau of Weights and Measures, 2019, ISBN 978-92-822-2272-0, p. 23
8. Sears, Francis; et al. (1982), University Physics (6th ed.), Addison Wesley, ISBN 0-201-07199-1
9. Umashankar, Korada (1989), Introduction to Engineering Electromagnetic Fields, World Scientific, pp. 77–79, ISBN 9971-5-0921-0
10. Morely & Hughes (1970), Principles of Electricity (5th ed.), p. 73, ISBN 0-582-42629-4
11. Tou, Stephen (2011). Visualization of Fields and Applications in Engineering. John Wiley and Sons. p. 64. ISBN 9780470978467.
12. Griffiths, David J. (1999). Introduction to electrodynamics (3rd ed.). Upper Saddle River, NJ: Prentice Hall. ISBN 0-13-805326-X. OCLC 40251748.
13. Purcell, p 25: "Gauss's Law: the flux of the electric field E through any closed surface ... equals 1/e times the total charge enclosed by the surface."
14. Purcell, p 356: "Faraday's Law of Induction."
15. Purcell, p7: "... the interaction between electric charges at rest is described by Coulomb's Law: two stationary electric charges repel or attract each other with a force proportional to the product of the magnitude of the charges and inversely proportional to the square of the distance between them.
16. Purcell, Edward (2011). Electricity and Magnetism (2nd ed.). Cambridge University Press. pp. 8–9. ISBN 978-1139503556.
17. gwrowe (8 October 2011). (PDF). physicspages.com. Archived from the original (PDF) on 22 March 2019. Retrieved 2 November 2020.
18. Huray, Paul G. (2009). Maxwell's Equations. Wiley-IEEE. p. 205. ISBN 978-0-470-54276-7.
19. Purcell, pp. 5-7.
20. Salam, Abdus (16 December 1976). "Quarks and leptons come out to play". New Scientist. 72: 652.
21. Griffiths, D.J. Introduction to Electrodynamics (3 ed.). Pearson Education. ISBN 9788177582932.
22. Grant, I.S.; Phillips, W.R. (2008). Electromagnetism (2 ed.). John Wiley & Sons. ISBN 978-0-471-92712-9.
23. Bennet, G.A.G.; Arnold, Edward (1974). Electricity and Modern Physics (2 ed.). ISBN 0-7131-2459-8.
24. Landau, Lev Davidovich; Lifshitz, Evgeny M. (1963). "68 the propagation of waves in an inhomogeneous medium". Electrodynamics of Continuous Media. Course of Theoretical Physics. Vol. 8. Pergamon. p. 285. ISBN 978-0-7581-6499-5. In Maxwell's equations… ε is a function of the co-ordinates.
25. Purcell, Edward M.; Morin, David J. (2013-01-21). Electricity and Magnetism. Higher Education from Cambridge University Press. pp. 241–251. doi:10.1017/cbo9781139012973. ISBN 9781139012973. Retrieved 2022-07-04.
26. Rosser, W. G. V. (1968). Classical Electromagnetism via Relativity. pp. 29–42. doi:10.1007/978-1-4899-6559-2. ISBN 978-1-4899-6258-4.
27. Heaviside, Oliver. Electromagnetic waves, the propagation of potential, and the electromagnetic effects of a moving charge.
28. Naber, Gregory L. (2012). The Geometry of Minkowski spacetime: an introduction to the mathematics of the special theory of relativity. Springer. pp. 4–5. ISBN 978-1-4419-7837-0. OCLC 804823303.
29. Purcell, Edward M.; David J. Morin (2013). Electricity and Magnetism (Third ed.). Cambridge. pp. 251–255. ISBN 978-1-139-01297-3. OCLC 1105718330.
30. Griffiths, David J. (2017). Introduction to electrodynamics (4th ed.). United Kingdom: Cambridge University Press. p. 454. ISBN 978-1-108-42041-9. OCLC 1021068059.
31. Jackson, John David (1999). Classical electrodynamics (3rd ed.). New York: Wiley. pp. 664–665. ISBN 0-471-30932-X. OCLC 38073290.

• Purcell, Edward; Morin, David (2013). Electricity and Magnetism (3rd ed.). Cambridge University Press, New York. ISBN 978-1-107-01402-2.
• Browne, Michael (2011). Physics for Engineering and Science (2nd ed.). McGraw-Hill, Schaum, New York. ISBN 978-0-07-161399-6.

External links

 

Wikimedia Commons has media related to Electric field.

• Electric field in "Electricity and Magnetism", R Nave – Hyperphysics, Georgia State University
• Frank Wolfs's lectures at University of Rochester, chapters 23 and 24
• Fields – a chapter from an online textbook