Cheetah MMPV
The Cheetah MMPV (Medium Mine Protected Vehicle) was a prototype built by the Force Protection, Inc., division of General Dynamics. It was intended as part of Force Protection's armoured military vehicle line-up, which includes the MRAP-class of Buffalo and Cougar vehicles and the Ocelot light protected patrol vehicle (LPPV).
| Cheetah | |
|---|---|
| Type | Infantry mobility vehicle |
| Place of origin | United States |
| Production history | |
| Designer | FPI |
| Manufacturer | Force Protection, Inc. |
| Produced | 2007-2008 |
| No. built | 13 prototypes[1] |
| Specifications | |
| Mass | 17000lbs (empty) with base armor |
| Length | 18 ft (5.4 m) |
| Width | 7 ft 7 in (2.3 m) |
| Height | 7 ft 5 in (2.26 m) |
| Crew | 1 (gunner) +4 |
| Armor | STANAG 1 at 17000lbs to STANAG 3 at 23000lbs |
Main armament | remote weapon station |
| Engine | Cummins ISB series Cummins QSB series |
| Payload capacity | 5000 lbs |
| Transmission | Allison 2500 SP automatic[2] |
| Suspension | 4×4 wheeled |
| Ground clearance | 18" |
| Fuel capacity | 55 gal |
Operational range | 500 mi |
| Maximum speed | 75 mph (122 km/h), 89mph burst |
Its design was based on the South African RG-31 Charger class of light-armored vehicle, intended as a reconnaissance, forward command and control, and urban operations vehicle for homeland security missions.
No contracts were procured for the Cheetah MMPV, and production ended in 2008 after 13 prototypes had been manufactured.
Specifications edit
- Transfer case: Marmon-Herrington 2 Speed with 4X4 or optional ADM
- Wheels: Hutchinson aluminum two-piece CTIS ready
- Tires: Michelin XZL run flat tires 365/80R20
- Electrical System: 24 V
- Approach angle: 45°
- Departure angle: 45°
- Turning radius: 27’
- Gradient: 60%
- Side Slope: 30%
- Fording Depth: 48"
- Center of Gravity: 35"
Production history edit
The Cheetah never went into full production.
In early 2007, Force Protection stated that full production could begin in July 2007,[3] but did not proceed after the May 2007 announcement that the US Marine Corps had ordered 1200 of the rival International MaxxPro vehicles.[4] At the same time Force Protection received an order for 14 of the larger MRAP Category III Buffalo.[5]
Cheetah was submitted to the Joint Light Tactical Vehicle (JLTV) competition but was officially rejected from the program in August 2008.[6] The JLTV program settled on the Oshkosh L-ATV in August 2015.
See also edit
Sources edit
- Cheetah MMPV Technical Data Sheet and Pictures to Army Recognition
- ^ (PDF). Archived from the original (PDF) on 6 October 2008. Retrieved 12 June 2008.
{{cite web}}: CS1 maint: archived copy as title (link) - ^ (PDF). Archived from the original (PDF) on 31 December 2006. Retrieved 1 May 2007.
{{cite web}}: CS1 maint: archived copy as title (link) - ^ "Blogging AUSA". 7 March 2007. Retrieved 30 August 2016.
- ^ . Archived from the original on 4 June 2007. Retrieved 4 June 2007.
- ^ $12M for 14 Buffalo MRAP-III Vehicles
- ^ "SEC Info".