IBM 8514

"8514" redirects here. For the number, see 8000 (number).

IBM 8514 is a graphics card manufactured by IBM and introduced with the IBM PS/2 line of personal computers in 1987. It supports a display resolution of 1024 × 768 pixels with 256 colors at 43.5 Hz (interlaced), or 640 × 480 at 60 Hz (non-interlaced).^[1][2] 8514 usually refers to the display controller hardware (such as the 8514/A display adapter).^[2] However, IBM sold the companion CRT monitor (for use with the 8514/A) which carries the same designation, 8514.

IBM 8514

Release date	1987; 36 years ago (1987)
Cards
Entry-level	IBM Image Adapter/A
History
Predecessor	EGA
Successor	XGA

The 8514 uses a standardised programming interface called the "Adapter Interface" or AI. This interface is also used by XGA, IBM Image Adapter/A, and clones of the 8514/A and XGA such as the ATI Technologies Mach 32 and IIT AGX. The interface allows computer software to offload common 2D-drawing operations (line-draw, color-fill, and block copies via a blitter) onto the 8514 hardware. This frees the host CPU for other tasks, and greatly improves the speed of redrawing a graphics visual (such as a pie-chart or CAD-illustration).

The 8514 initially sold for US$1,290 for the adapter and US$270 for the 512KB memory expansion. The 8514/A required a Micro Channel architecture bus at a time when ISA systems were standard.

History

The 8514 was introduced with the IBM PS/2 computers in April 1987. It was an optional upgrade to the Micro Channel architecture based PS/2's Video Graphics Array (VGA), and was delivered within three months of PS/2's introduction.

Although not the first PC video card to support hardware acceleration, IBM's 8514 is often credited^{[by whom?]} as the first PC mass-market fixed-function accelerator. Up until the 8514's introduction, PC graphics acceleration was relegated to expensive workstation-class, graphics coprocessor boards. Coprocessor boards (such as the TARGA Truevision series) were designed around special CPU or digital signal processor chips which were programmable. Fixed-function accelerators, such as the 8514, sacrificed programmability for better cost/performance ratio.^{[citation needed]}

Later compatible 8514 boards were based on the Texas Instruments TMS34010 chip.^{[citation needed]}

Even though the 8514 was not a best-seller, it created a market for fixed-function PC graphics accelerators which grew exponentially in the early 1990s.^{[citation needed]}

The ATI Mach 8 and Mach 32 chips were popular clones, and several companies (notably S3) designed graphics accelerator chips which were not register compatible but were conceptually very similar to the 8514/A.^[3]

The 8514 was superseded by IBM XGA.

The VESA Group introduced a common standardized way to access features like hardware cursors, Bit Block transfers (Bit Blt), off screen sprites, hardware panning, drawing and other functions with VBE/accelerator functions (VBE/AF) in August 1996.

Software support

Software that supported this graphic standard:^[4]

• OS/2
• Windows 2.1
• Windows 3.x
• Windows 95^[5]
• XFree86 2.1.1
• AutoCAD 10
• QuikMenu^[6]
• Any BGI software using IBM8514.BGI

Output capabilities

The 8514 offered:

• 640 × 480 graphics with 256 colors out of 262,144 (18 bit RGB); text mode with 80×34 characters;
• 1024 × 768 graphics with 256 colors out of 262,144 (18 bit RGB); text mode with 85×38 or 146×51 characters;

Latter clone board offered additional resolutions:^{[citation needed]}

• 800 × 600 with 16-bit and 24-bit color depths
• 1280 × 1024 with 16-bit and 24-bit color depths

Clones

 

ATI Mach32 VLB video card

 

Tseng ET4000

In the late 1980s, several companies cloned the 8514/A often for the ISA bus. Notable among those was Western Digital Imaging's PWGA-1 (also known as the WD9500 chip set), the Chips & Technologies 82C480, and ATI's Mach8 and later Mach32 chips. In one way or another, the clones were all better than the original with more speed, enhanced drawing functionality and overall improved video mode selections. Clone support for non-interlaced modes at resolutions like 800×600 and 1280×1024 was typical, and all clones had longer command queues for increased performance.

• ATI Technologies: the Mach8, Mach32,^[1] Graphics Vantage and 8514/Ultra
• Chips and Technologies: F82C480 B EIZO - AA40 and F82C481 Miro Magic Plus
• Matrox: MG-108
• Paradise Systems: Plus-A, Renaissance Rendition II
• Desktop Computing: AGA 1024 (also capable of emulating TIGA standards)^[7]
• NEC: Multisync Graphics Engine
• IIT AGX and Tseng Labs ET4000 are also referenced as being IBM 8514 compatible.^[4][8][9]

See also

• List of IBM products
• List of defunct graphics chips and card companies

References

1. "The 8514/A Graphics Accelerator". OS/2 Museum. 2013-05-09. Retrieved 2014-06-19.
2. "8514A". www.walshcomptech.com. Retrieved 2022-10-26.
3. Córdova; Zelnick (June 11, 1991). "$520 Adapter Marries 8514/A, TIGA Graphics". PC Magazine. p. 58.
4. . Theodor.lauppert.ws. Archived from the original on 2014-07-14. Retrieved 2014-06-19.
5. "Aptiva - Installing the 8514/A display driver in Windows 95". IBM. 1999-02-19 [first published 5 August 1996]. Retrieved 2019-04-12.
6. Corp., NeoSoft (1998). "QuikMenu - Version 3.1 - IMPORTANT INFORMATION". jasonwilliams400com.startlogic.com.
7. Ross, Matthew (May 15, 1990). "New and Improved - Improved AGA 1024". PC Magazine. p. 56.
8. InfoWorld - Google Livros. 1990-07-16. Retrieved 2014-06-19.
9. "VGA Legacy". Archived from the original on 2014-06-29. Retrieved 2014-06-28.

Further reading

• Richter, Jake; Smith, Bud (April 1990). Graphics Programming for the 8514/A: The New PC Graphics Standard. M & T Books. ISBN 1-55851-086-9.
• Sanchez, Julio; Canton, Maria P. (February 26, 2003). The PC Graphics Handbook. CRC. ISBN 0-8493-1678-2.
• Guide to the IBM 8514a
• 8514 Hardware