fbpx
Wikipedia

SCSI mode page

SCSI target devices provide a number of SCSI mode pages. These can be interrogated by a MODE SENSE command and set by a MODE SELECT command. The MODE SENSE commands and the mode page formats include a 6-bit page code field, allowing for 64 possible mode pages. When the number of pages approached this limit, an eight-bit subpage code field was added. A description of many of these page codes is included below. Note that any given SCSI device type will only support a subset of the possible page codes, and some page codes may have different meanings for different devices.

List of SCSI mode page codes edit

[1]

Page/Subpage Code Description
00h/xxh Vendor specific
01h/00h Read-Write Error Recovery
02h/00h Disconnect-Reconnect - allows the initiator to tune SCSI bus performance
03h/00h Format Device (disk devices)
04h/00h Rigid Disk Geometry
05h/00h Flexible Disk
06h/00h Optical Memory
06h/00h RBC Device Parameters
07h/00h Verify Error Recovery
08h/00h Caching
0Ah/00h Control - tagged queuing, extended contingent allegiance, asynchronous event notification, and error logging
0Ah/01h Control Extension - timestamp, asymmetric logical unit access, initial command priority, maximum sense data length
0Bh/00h Medium Types Supported
0Ch/00h Notch and Partition
0Dh/00h CD Device Parameters
0Eh/00h CDROM Audio Control
0Eh/01h Target Device (Automation/Drive Interface)
0Eh/02h DT Device Primary Port parameters (Automation/Drive Interface devices)
0Eh/03h Logical Unit parameters (Automation/Drive Interface devices)
0Eh/04h Target Device Serial Number (Automation/Drive Interface devices)
10h/00h Device Configuration
11h/00h Medium Partition (1)
14h/00h Enclosure Services Management
15h/00h Extended
16h/00h Extended Device-Type Specific
18h/00h Protocol-Specific Logical Unit
19h/00h Protocol-Specific Port
1Ah/00h Power Conditions
1Ah/01h Power Control
1Bh/00h LUN Mapping
1Ch/00h Informational Exceptions Control
1Ch/01h Background Control
1Ch/02h Logical Block Provisioning
1Dh/00h Element Address Assignment (media changer devices)
1Eh/00h Transport Geometry Parameters (media changer devices)
1Fh/00h Device Capabilities (media changer devices)
20h-29h Vendor specific
2Ah/xxh Device-type specific
2Ah/00h CD Capabilities and Mechanical Status
3Fh/xxh return all pages and/or subpages (valid only for a MODE SENSE command)
xxh/FFh return all subpages (valid only for a MODE SENSE command)

References edit

  1. ^ "SCSI Primary Commands - 4 (SPC-4)" (PDF). Retrieved 2021-12-07.

scsi, mode, page, scsi, target, devices, provide, number, these, interrogated, mode, sense, command, mode, select, command, mode, sense, commands, mode, page, formats, include, page, code, field, allowing, possible, mode, pages, when, number, pages, approached. SCSI target devices provide a number of SCSI mode pages These can be interrogated by a MODE SENSE command and set by a MODE SELECT command The MODE SENSE commands and the mode page formats include a 6 bit page code field allowing for 64 possible mode pages When the number of pages approached this limit an eight bit subpage code field was added A description of many of these page codes is included below Note that any given SCSI device type will only support a subset of the possible page codes and some page codes may have different meanings for different devices List of SCSI mode page codes edit 1 Page Subpage Code Description00h xxh Vendor specific01h 00h Read Write Error Recovery02h 00h Disconnect Reconnect allows the initiator to tune SCSI bus performance03h 00h Format Device disk devices 04h 00h Rigid Disk Geometry05h 00h Flexible Disk06h 00h Optical Memory06h 00h RBC Device Parameters07h 00h Verify Error Recovery08h 00h Caching0Ah 00h Control tagged queuing extended contingent allegiance asynchronous event notification and error logging0Ah 01h Control Extension timestamp asymmetric logical unit access initial command priority maximum sense data length0Bh 00h Medium Types Supported0Ch 00h Notch and Partition0Dh 00h CD Device Parameters0Eh 00h CDROM Audio Control0Eh 01h Target Device Automation Drive Interface 0Eh 02h DT Device Primary Port parameters Automation Drive Interface devices 0Eh 03h Logical Unit parameters Automation Drive Interface devices 0Eh 04h Target Device Serial Number Automation Drive Interface devices 10h 00h Device Configuration11h 00h Medium Partition 1 14h 00h Enclosure Services Management15h 00h Extended16h 00h Extended Device Type Specific18h 00h Protocol Specific Logical Unit19h 00h Protocol Specific Port1Ah 00h Power Conditions1Ah 01h Power Control1Bh 00h LUN Mapping1Ch 00h Informational Exceptions Control1Ch 01h Background Control1Ch 02h Logical Block Provisioning1Dh 00h Element Address Assignment media changer devices 1Eh 00h Transport Geometry Parameters media changer devices 1Fh 00h Device Capabilities media changer devices 20h 29h Vendor specific2Ah xxh Device type specific2Ah 00h CD Capabilities and Mechanical Status3Fh xxh return all pages and or subpages valid only for a MODE SENSE command xxh FFh return all subpages valid only for a MODE SENSE command References edit SCSI Primary Commands 4 SPC 4 PDF Retrieved 2021 12 07 Retrieved from https en wikipedia org w index php title SCSI mode page amp oldid 1059020194, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.