fbpx
Wikipedia

Runway end identifier lights

Runway end identifier lights (REIL[1]) (ICAO identifies these as Runway Threshold Identification Lights) are installed at many airports to provide rapid and positive identification of the approach end of a particular runway. The system consists of a pair of synchronized flashing lights located laterally on each side of the runway threshold. REILs may be either omnidirectional or unidirectional facing the approach area.[2] They are effective for:[2]

  • Identification of a runway surrounded by a preponderance of other lighting
  • Identification of a runway which lacks contrast with surrounding terrain
  • Identification of a runway during reduced visibility
Runway end identifier lights
REIL installed near the runway 19 threshold at Teterboro Airport as seen from an approaching aircraft

The International Civil Aviation Organization (ICAO) recommends that:[3]

  • Runway threshold identification lights should be installed:
    • at the threshold of a non-precision approach runway when additional threshold conspicuity is necessary or where it is not practicable to provide other approach lighting aids; and
    • where a runway threshold is permanently displaced from the runway extremity or temporarily displaced from the normal position and additional threshold conspicuity is necessary.
  • Runway threshold identification lights shall be located symmetrically about the runway centre line, in line with the threshold and approximately 10 meters outside each line of runway edge lights.
  • Runway threshold identification lights should be flashing white lights with a flash frequency between 60 and 120 per minute.
  • The lights shall be visible only in the direction of approach to the runway.

References

  1. ^ "Order JO 7340.1Z: Contractions" (PDF). Federal Aviation Administration. March 15, 2007.
  2. ^ a b FAA Aeronautical Information Manual, Chapter 2 (Aeronautical Lighting and Other Airport Visual Aids), Section 1 (Airport Lighting Aids) 2009-09-04 at the Wayback Machine
  3. ^ (PDF) (3 ed.). July 1999. Archived from the original (PDF) on 2012-07-23. §5.3.8, "Runway threshold identification lights"

External links

    runway, identifier, lights, reil, icao, identifies, these, runway, threshold, identification, lights, installed, many, airports, provide, rapid, positive, identification, approach, particular, runway, system, consists, pair, synchronized, flashing, lights, loc. Runway end identifier lights REIL 1 ICAO identifies these as Runway Threshold Identification Lights are installed at many airports to provide rapid and positive identification of the approach end of a particular runway The system consists of a pair of synchronized flashing lights located laterally on each side of the runway threshold REILs may be either omnidirectional or unidirectional facing the approach area 2 They are effective for 2 Identification of a runway surrounded by a preponderance of other lighting Identification of a runway which lacks contrast with surrounding terrain Identification of a runway during reduced visibilityRunway end identifier lights source source source source source source source source source source source source source source REIL installed near the runway 19 threshold at Teterboro Airport as seen from an approaching aircraft The International Civil Aviation Organization ICAO recommends that 3 Runway threshold identification lights should be installed at the threshold of a non precision approach runway when additional threshold conspicuity is necessary or where it is not practicable to provide other approach lighting aids and where a runway threshold is permanently displaced from the runway extremity or temporarily displaced from the normal position and additional threshold conspicuity is necessary Runway threshold identification lights shall be located symmetrically about the runway centre line in line with the threshold and approximately 10 meters outside each line of runway edge lights Runway threshold identification lights should be flashing white lights with a flash frequency between 60 and 120 per minute The lights shall be visible only in the direction of approach to the runway References Edit Order JO 7340 1Z Contractions PDF Federal Aviation Administration March 15 2007 a b FAA Aeronautical Information Manual Chapter 2 Aeronautical Lighting and Other Airport Visual Aids Section 1 Airport Lighting Aids Archived 2009 09 04 at the Wayback Machine Aerodrome Design and Operations PDF 3 ed July 1999 Archived from the original PDF on 2012 07 23 5 3 8 Runway threshold identification lights External links EditFAA Aeronautical Information Manual Retrieved from https en wikipedia org w index php title Runway end identifier lights amp oldid 1140420383, wikipedia, wiki, book, books, library,

    article

    , read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.