Multiple-scale analysis

Not to be confused with Multiresolution analysis.

In mathematics and physics, multiple-scale analysis (also called the method of multiple scales) comprises techniques used to construct uniformly valid approximations to the solutions of perturbation problems, both for small as well as large values of the independent variables. This is done by introducing fast-scale and slow-scale variables for an independent variable, and subsequently treating these variables, fast and slow, as if they are independent. In the solution process of the perturbation problem thereafter, the resulting additional freedom – introduced by the new independent variables – is used to remove (unwanted) secular terms. The latter puts constraints on the approximate solution, which are called solvability conditions.

Mathematics research from about the 1980s proposes that coordinate transforms and invariant manifolds provide a sounder support for multiscale modelling (for example, see center manifold and slow manifold).

Example: undamped Duffing equation

 

Here the differences between ${\textstyle {\mathcal {O}}(\varepsilon )}$  approaches for both regular perturbation theory and multiple-scale analysis can be seen, and how they compare to the exact solution for ${\textstyle \varepsilon ={\frac {1}{4}}}$ 

Differential equation and energy conservation

As an example for the method of multiple-scale analysis, consider the undamped and unforced Duffing equation:^[1]

$${\displaystyle {\frac {d^{2}y}{dt^{2}}}+y+\varepsilon y^{3}=0,}$$

 

$${\displaystyle y(0)=1,\qquad {\frac {dy}{dt}}(0)=0,}$$

 

which is a second-order ordinary differential equation describing a nonlinear oscillator. A solution y(t) is sought for small values of the (positive) nonlinearity parameter 0 < ε ≪ 1. The undamped Duffing equation is known to be a Hamiltonian system:

$${\displaystyle {\frac {dp}{dt}}=-{\frac {\partial H}{\partial q}},\qquad {\frac {dq}{dt}}=+{\frac {\partial H}{\partial p}},\quad {\text{ with }}\quad H={\tfrac {1}{2}}p^{2}+{\tfrac {1}{2}}q^{2}+{\tfrac {1}{4}}\varepsilon q^{4},}$$

 

with q = y(t) and p = dy/dt. Consequently, the Hamiltonian H(p, q) is a conserved quantity, a constant, equal to H = 1/2 + 1/4 ε for the given initial conditions. This implies that both y and dy/dt have to be bounded:

$${\displaystyle \left|y(t)\right|\leq {\sqrt {1+{\tfrac {1}{2}}\varepsilon }}\quad {\text{ and }}\quad \left|{\frac {dy}{dt}}\right|\leq {\sqrt {1+{\tfrac {1}{2}}\varepsilon }}\qquad {\text{ for all }}t.}$$

 

Straightforward perturbation-series solution

A regular perturbation-series approach to the problem proceeds by writing ${\textstyle y(t)=y_{0}(t)+\varepsilon y_{1}(t)+{\mathcal {O}}(\varepsilon ^{2})}$  and substituting this into the undamped Duffing equation. Matching powers of ${\textstyle \varepsilon }$  gives the system of equations

$${\displaystyle {\begin{aligned}{\frac {d^{2}y_{0}}{dt^{2}}}+y_{0}&=0,\\{\frac {d^{2}y_{1}}{dt^{2}}}+y_{1}&=-y_{0}^{3}.\end{aligned}}}$$

 

Solving these subject to the initial conditions yields

$${\displaystyle y(t)=\cos(t)+\varepsilon \left[{\tfrac {1}{32}}\cos(3t)-{\tfrac {1}{32}}\cos(t)-\underbrace {{\tfrac {3}{8}}\,t\,\sin(t)} _{\text{secular}}\right]+{\mathcal {O}}(\varepsilon ^{2}).}$$

 

Note that the last term between the square braces is secular: it grows without bound for large |t|. In particular, for ${\displaystyle t=O(\varepsilon ^{-1})}$  this term is O(1) and has the same order of magnitude as the leading-order term. Because the terms have become disordered, the series is no longer an asymptotic expansion of the solution.

Method of multiple scales

To construct a solution that is valid beyond ${\displaystyle t=O(\epsilon ^{-1})}$ , the method of multiple-scale analysis is used. Introduce the slow scale t₁:

$${\displaystyle t_{1}=\varepsilon t}$$

 

and assume the solution y(t) is a perturbation-series solution dependent both on t and t₁, treated as:

$${\displaystyle y(t)=Y_{0}(t,t_{1})+\varepsilon Y_{1}(t,t_{1})+\cdots .}$$

 

So:

$${\displaystyle {\begin{aligned}{\frac {dy}{dt}}&=\left({\frac {\partial Y_{0}}{\partial t}}+{\frac {dt_{1}}{dt}}{\frac {\partial Y_{0}}{\partial t_{1}}}\right)+\varepsilon \left({\frac {\partial Y_{1}}{\partial t}}+{\frac {dt_{1}}{dt}}{\frac {\partial Y_{1}}{\partial t_{1}}}\right)+\cdots \\&={\frac {\partial Y_{0}}{\partial t}}+\varepsilon \left({\frac {\partial Y_{0}}{\partial t_{1}}}+{\frac {\partial Y_{1}}{\partial t}}\right)+{\mathcal {O}}(\varepsilon ^{2}),\end{aligned}}}$$

 

using dt₁/dt = ε. Similarly:

$${\displaystyle {\frac {d^{2}y}{dt^{2}}}={\frac {\partial ^{2}Y_{0}}{\partial t^{2}}}+\varepsilon \left(2{\frac {\partial ^{2}Y_{0}}{\partial t\,\partial t_{1}}}+{\frac {\partial ^{2}Y_{1}}{\partial t^{2}}}\right)+{\mathcal {O}}(\varepsilon ^{2}).}$$

 

Then the zeroth- and first-order problems of the multiple-scales perturbation series for the Duffing equation become:

$${\displaystyle {\begin{aligned}{\frac {\partial ^{2}Y_{0}}{\partial t^{2}}}+Y_{0}&=0,\\{\frac {\partial ^{2}Y_{1}}{\partial t^{2}}}+Y_{1}&=-Y_{0}^{3}-2\,{\frac {\partial ^{2}Y_{0}}{\partial t\,\partial t_{1}}}.\end{aligned}}}$$

 

Solution

The zeroth-order problem has the general solution:

$${\displaystyle Y_{0}(t,t_{1})=A(t_{1})\,e^{+it}+A^{\ast }(t_{1})\,e^{-it},}$$

 

with A(t₁) a complex-valued amplitude to the zeroth-order solution Y₀(t, t₁) and i² = −1. Now, in the first-order problem the forcing in the right hand side of the differential equation is

$${\displaystyle \left[-3\,A^{2}\,A^{\ast }-2\,i\,{\frac {dA}{dt_{1}}}\right]\,e^{+it}-A^{3}\,e^{+3it}+c.c.}$$

 

where c.c. denotes the complex conjugate of the preceding terms. The occurrence of secular terms can be prevented by imposing on the – yet unknown – amplitude A(t₁) the solvability condition

$${\displaystyle -3\,A^{2}\,A^{\ast }-2\,i\,{\frac {dA}{dt_{1}}}=0.}$$

 

The solution to the solvability condition, also satisfying the initial conditions y(0) = 1 and dy/dt(0) = 0, is:

$${\displaystyle A={\tfrac {1}{2}}\,\exp \left({\tfrac {3}{8}}\,i\,t_{1}\right).}$$

 

As a result, the approximate solution by the multiple-scales analysis is

$${\displaystyle y(t)=\cos \left[\left(1+{\tfrac {3}{8}}\,\varepsilon \right)t\right]+{\mathcal {O}}(\varepsilon ),}$$

 

using t₁ = εt and valid for εt = O(1). This agrees with the nonlinear frequency changes found by employing the Lindstedt–Poincaré method.

This new solution is valid until ${\displaystyle t=O(\epsilon ^{-2})}$ . Higher-order solutions – using the method of multiple scales – require the introduction of additional slow scales, i.e., t₂ = ε² t, t₃ = ε³ t, etc. However, this introduces possible ambiguities in the perturbation series solution, which require a careful treatment (see Kevorkian & Cole 1996; Bender & Orszag 1999).^[2]

Coordinate transform to amplitude/phase variables

Alternatively, modern approaches derive these sorts of models using coordinate transforms, like in the method of normal forms,^[3] as described next.

A solution ${\displaystyle y\approx r\cos \theta }$  is sought in new coordinates ${\displaystyle (r,\theta )}$  where the amplitude ${\displaystyle r(t)}$  varies slowly and the phase ${\displaystyle \theta (t)}$  varies at an almost constant rate, namely ${\displaystyle d\theta /dt\approx 1.}$  Straightforward algebra finds the coordinate transform^{[citation needed]}

$${\displaystyle y=r\cos \theta +{\frac {1}{32}}\varepsilon r^{3}\cos 3\theta +{\frac {1}{1024}}\varepsilon ^{2}r^{5}(-21\cos 3\theta +\cos 5\theta )+{\mathcal {O}}(\varepsilon ^{3})}$$

 

transforms Duffing's equation into the pair that the radius is constant ${\displaystyle dr/dt=0}$  and the phase evolves according to

$${\displaystyle {\frac {d\theta }{dt}}=1+{\frac {3}{8}}\varepsilon r^{2}-{\frac {15}{256}}\varepsilon ^{2}r^{4}+{\mathcal {O}}(\varepsilon ^{3}).}$$

 

That is, Duffing's oscillations are of constant amplitude ${\displaystyle r}$  but have different frequencies ${\displaystyle d\theta /dt}$  depending upon the amplitude.^[4]

More difficult examples are better treated using a time-dependent coordinate transform involving complex exponentials (as also invoked in the previous multiple time-scale approach). A web service will perform the analysis for a wide range of examples.^[5]

See also

• Method of matched asymptotic expansions
• WKB approximation
• Method of averaging
• Krylov–Bogoliubov averaging method

Notes

1. This example is treated in: Bender & Orszag (1999) pp. 545–551.
2. Bender & Orszag (1999) p. 551.
3. Lamarque, C.-H.; Touze, C.; Thomas, O. (2012), "An upper bound for validity limits of asymptotic analytical approaches based on normal form theory" (PDF), Nonlinear Dynamics, 70 (3): 1931–1949, doi:10.1007/s11071-012-0584-y, hdl:10985/7473, S2CID 254862552
4. Roberts, A.J., Modelling emergent dynamics in complex systems, retrieved 2013-10-03
5. Roberts, A.J., Construct centre manifolds of ordinary or delay differential equations (autonomous), retrieved 2013-10-03

References

• Kevorkian, J.; Cole, J. D. (1996), Multiple scale and singular perturbation methods, Springer, ISBN 978-0-387-94202-5
• Bender, C.M.; Orszag, S.A. (1999), Advanced mathematical methods for scientists and engineers, Springer, pp. 544–568, ISBN 978-0-387-98931-0
• Nayfeh, A.H. (2004), Perturbation methods, Wiley–VCH Verlag, ISBN 978-0-471-39917-9

External links

• Carson C. Chow (ed.). "Multiple scale analysis". Scholarpedia.