fbpx
Wikipedia

Metric Commission

The Metric Commission (French: Commission du système métrique), formally the Preparatory Commission for the Conversion to the Metric System, was a Canadian government agency established by the federal government in 1971 to facilitate Canada's conversion to the metric system from the imperial system of weights and measures and to educate the public on the metric system.

Metric Commission logo, used on many metric products in Canada during the 1970s and 1980s

The Commission was formed following the release of "The White Paper on Metric Conversion", a January 1971 federal government document which noted most nations had adopted the metric system and anticipated that the United States would do likewise.[1]

The commission's logo was designed by Gottschalk+Ash Toronto, designed by Stuart Ash,[2] and licensed for use on any metric products (such as rulers). It is based on the logo of the 1967 Canadian Centennial by the same firm.[3]

A number of Progressive Conservative Members of Parliament had vocally opposed the metric system during the previous Liberal government of Pierre Trudeau. Dennis Braithwaite of the Toronto Star criticized metrification in the media.[4]

The agency was abolished on March 31, 1985,[5] early in the mandate of a new Progressive Conservative government that came to office in the 1984 federal election. This followed the abolition of the United States Metric Board by President Ronald Reagan in 1982. The Metric Commission was replaced by a small metric office within Industry Canada. By October of that year, the metric office became the Measurement Information Division of Industry Canada, and staff numbers were significantly decreased. In April 1988, the Measurement Information Division was shut down. The Metric Commission Order remains in force under the Industry Canada Act and reports to the Minister of Consumer and Corporate Affairs.[6]

See also

References

  1. ^ "The metric housewife". Matinee. CBC Radio. 4 February 1970. Retrieved 2007-11-11.
  2. ^ Munari, Nicola-Matteo (19 June 2016). "Stuart Ash". Designculture. Retrieved 7 August 2018.
  3. ^ "Looking Forward: Looking Back". Entro Communications. 29 June 2017. Retrieved 7 August 2018.
  4. ^ "The great Canadian metric debate". 90 Minutes Live. CBC Television. 27 September 1977. Retrieved 2007-11-11.
  5. ^ . Canada Public Service Agency. 2 February 2006. Archived from the original on 6 July 2011. Retrieved 2007-11-11.
  6. ^ Legislative Services Branch, Justice Canada (1971). "Metric Commission Order (C.R.C., c. 972)". Justice Laws. Retrieved 7 August 2018.

metric, commission, french, commission, système, métrique, formally, preparatory, commission, conversion, metric, system, canadian, government, agency, established, federal, government, 1971, facilitate, canada, conversion, metric, system, from, imperial, syst. The Metric Commission French Commission du systeme metrique formally the Preparatory Commission for the Conversion to the Metric System was a Canadian government agency established by the federal government in 1971 to facilitate Canada s conversion to the metric system from the imperial system of weights and measures and to educate the public on the metric system Metric Commission logo used on many metric products in Canada during the 1970s and 1980s The Commission was formed following the release of The White Paper on Metric Conversion a January 1971 federal government document which noted most nations had adopted the metric system and anticipated that the United States would do likewise 1 The commission s logo was designed by Gottschalk Ash Toronto designed by Stuart Ash 2 and licensed for use on any metric products such as rulers It is based on the logo of the 1967 Canadian Centennial by the same firm 3 A number of Progressive Conservative Members of Parliament had vocally opposed the metric system during the previous Liberal government of Pierre Trudeau Dennis Braithwaite of the Toronto Star criticized metrification in the media 4 The agency was abolished on March 31 1985 5 early in the mandate of a new Progressive Conservative government that came to office in the 1984 federal election This followed the abolition of the United States Metric Board by President Ronald Reagan in 1982 The Metric Commission was replaced by a small metric office within Industry Canada By October of that year the metric office became the Measurement Information Division of Industry Canada and staff numbers were significantly decreased In April 1988 the Measurement Information Division was shut down The Metric Commission Order remains in force under the Industry Canada Act and reports to the Minister of Consumer and Corporate Affairs 6 See also EditImperial and US customary measurement systems Metrication in Canada Metrication in the United StatesReferences Edit The metric housewife Matinee CBC Radio 4 February 1970 Retrieved 2007 11 11 Munari Nicola Matteo 19 June 2016 Stuart Ash Designculture Retrieved 7 August 2018 Looking Forward Looking Back Entro Communications 29 June 2017 Retrieved 7 August 2018 The great Canadian metric debate 90 Minutes Live CBC Television 27 September 1977 Retrieved 2007 11 11 Population Affiliation Report Metric Commission Canada Public Service Agency 2 February 2006 Archived from the original on 6 July 2011 Retrieved 2007 11 11 Legislative Services Branch Justice Canada 1971 Metric Commission Order C R C c 972 Justice Laws Retrieved 7 August 2018 Retrieved from https en wikipedia org w index php title Metric Commission amp oldid 1091183433, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.