The Lyman filament extruder is a device for making 3-D printer filament suitable for use in 3-D printers like the RepRap. It is named after its developer Hugh Lyman and was the winner of the Desktop Factory Competition.[1]
The goal in the competition was to build an open source filament extruder for less than $250 in components that can take ABS or PLA resin pellets, mix them with colorant, and extrude enough 1.75 mm diameter ± 0.05 mm filament that can be wrapped on a 1 kg spool. The machine must use the Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) license.
The use of DIY filament extruders like the Lyman can significantly reduce the cost of printing with 3-D printers.[2] The Lyman filament extruder was designed to handle pellets, but can also be used to make filament from other sources of plastic such as post-consumer waste like other RecycleBots. Producing plastic filament from recycled plastic has a significant positive environmental impact.[3]
Referencesedit
^Harry McCracken (March 4, 2013). "How an 83-Year-Old Inventor Beat the High Cost of 3D Printing". Time.
^Christian Baechler, Matthew DeVuono, and Joshua M. Pearce, “Distributed Recycling of Waste Polymer into RepRap Feedstock” Rapid Prototyping Journal,19(2), pp. 118-125 (2013). open access
^M. Kreiger, G. C. Anzalone, M. L. Mulder, A. Glover and J. M Pearce (2013). Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas. MRS Online Proceedings Library, 1492, mrsf12-1492-g04-06 doi:10.1557/opl.2013.258. open accesslife-cycle analysis
December 18, 2023
lyman, filament, extruder, device, making, printer, filament, suitable, printers, like, reprap, named, after, developer, hugh, lyman, winner, desktop, factory, competition, goal, competition, build, open, source, filament, extruder, less, than, components, tha. The Lyman filament extruder is a device for making 3 D printer filament suitable for use in 3 D printers like the RepRap It is named after its developer Hugh Lyman and was the winner of the Desktop Factory Competition 1 The goal in the competition was to build an open source filament extruder for less than 250 in components that can take ABS or PLA resin pellets mix them with colorant and extrude enough 1 75 mm diameter 0 05 mm filament that can be wrapped on a 1 kg spool The machine must use the Attribution ShareAlike 3 0 Unported CC BY SA 3 0 license The use of DIY filament extruders like the Lyman can significantly reduce the cost of printing with 3 D printers 2 The Lyman filament extruder was designed to handle pellets but can also be used to make filament from other sources of plastic such as post consumer waste like other RecycleBots Producing plastic filament from recycled plastic has a significant positive environmental impact 3 References edit Harry McCracken March 4 2013 How an 83 Year Old Inventor Beat the High Cost of 3D Printing Time Christian Baechler Matthew DeVuono and Joshua M Pearce Distributed Recycling of Waste Polymer into RepRap Feedstock Rapid Prototyping Journal 19 2 pp 118 125 2013 open access M Kreiger G C Anzalone M L Mulder A Glover and J M Pearce 2013 Distributed Recycling of Post Consumer Plastic Waste in Rural Areas MRS Online Proceedings Library 1492 mrsf12 1492 g04 06 doi 10 1557 opl 2013 258 open accesslife cycle analysis Retrieved from https en wikipedia org w index php title Lyman filament extruder amp oldid 1029984260, wikipedia, wiki, book, books, library,
