A class 5 switch provides telephone service to end customers locally in the exchange area, and thus it is concerned with "subscriber type" activities: generation of dial-tone and other "comfort noises"; handling of network services such as advice of duration and charge etc. Specifically, a class-5 switch provides dial tone, local switching and access to the rest of the network. Class-4 switches do not provide subscriber lines, their role is to route calls between other switches.
Typically a class-5 switch serves an area of a city, an individual town, or several villages and could serve from several hundred to 100,000 subscribers.
Since the replacement of electromechanical exchanges by modern digital ones, the function of a class-5 switch in rural areas is often performed by a remote switch or Remote Digital Terminal installed at the original switch site to handle local switching or concentration, respectively. The class-5 switching infrastructure is then physically located in a larger population center. Urban areas with extensive underground plant tend to keep the classic class-5 office architecture.
Hardware
Before the office classification system for Direct Distance Dialing (DDD) was established, the principal designs in use for class 5 in the US were crossbar systems, Panel switches, and Strowger-type step-by-step systems. The DDD program involved installations of large numbers of new 5XB crossbar switches in the 1950s and 1960s. In addition, 1ESS switches and their variants appeared in the 1960s. Most of these systems were removed in the late 20th century, primarily replaced in North America by DMS-10, DMS-100 and 5ESS switches in the Bell operating territories and the GTD-5 EAX in the GTE operating areas. Principal European products include Ericsson AXE telephone exchange, Siemens EWSD and Alcatel-Lucent S12 and E10.
In the 21st century, US and European service providers continued to upgrade their networks, replacing older DMS-10, DMS-100, 5ESS, GTD-5 and EWSD switches with Voice over IP technology.
class, telephone, switch, this, article, includes, list, references, related, reading, external, links, sources, remain, unclear, because, lacks, inline, citations, please, help, improve, this, article, introducing, more, precise, citations, august, 2008, lear. This article includes a list of references related reading or external links but its sources remain unclear because it lacks inline citations Please help to improve this article by introducing more precise citations August 2008 Learn how and when to remove this template message A class 5 telephone switch is a telephone exchange in the public switched telephone network PSTN that directly serves subscribers and manages subscriber calling features Class 5 services include basic dial tone calling features and additional digital and data services to subscribers connected to a local loop Function EditA class 5 switch provides telephone service to end customers locally in the exchange area and thus it is concerned with subscriber type activities generation of dial tone and other comfort noises handling of network services such as advice of duration and charge etc Specifically a class 5 switch provides dial tone local switching and access to the rest of the network Class 4 switches do not provide subscriber lines their role is to route calls between other switches Typically a class 5 switch serves an area of a city an individual town or several villages and could serve from several hundred to 100 000 subscribers Since the replacement of electromechanical exchanges by modern digital ones the function of a class 5 switch in rural areas is often performed by a remote switch or Remote Digital Terminal installed at the original switch site to handle local switching or concentration respectively The class 5 switching infrastructure is then physically located in a larger population center Urban areas with extensive underground plant tend to keep the classic class 5 office architecture Hardware EditBefore the office classification system for Direct Distance Dialing DDD was established the principal designs in use for class 5 in the US were crossbar systems Panel switches and Strowger type step by step systems The DDD program involved installations of large numbers of new 5XB crossbar switches in the 1950s and 1960s In addition 1ESS switches and their variants appeared in the 1960s Most of these systems were removed in the late 20th century primarily replaced in North America by DMS 10 DMS 100 and 5ESS switches in the Bell operating territories and the GTD 5 EAX in the GTE operating areas Principal European products include Ericsson AXE telephone exchange Siemens EWSD and Alcatel Lucent S12 and E10 In the 21st century US and European service providers continued to upgrade their networks replacing older DMS 10 DMS 100 5ESS GTD 5 and EWSD switches with Voice over IP technology See also EditCommunity dial office PSTN network topology Softswitch Retrieved from https en wikipedia org w index php title Class 5 telephone switch amp oldid 1131268006, wikipedia, wiki, book, books, library,
