fbpx
Wikipedia

Austin transformer

An Austin ring transformer is a special type of isolation transformer with low capacitance and high isolation between the primary and secondary.

Austin ring transformer at the base of a WMCA and WNYC AM transmitting tower in Kearny, New Jersey. The two interlocking rings are the primary and secondary transformer windings. The spherical objects directly below and to the right of the windings are a Spark ball gap, for lightning protection.

Etymology edit

It is named after its inventor, Arthur O. Austin, who graduated from Stanford University in 1903 and who obtained 225 patents in his career.[1]

Background edit

AM radio stations that broadcast in the medium frequency (MF) and low frequency (LF) bands typically use a type of antenna called a base-fed mast radiator. This is a tall radio mast in which the steel mast structure itself is energized and serves as the antenna. The mast is mounted on a ceramic insulator to isolate it from the ground and the feedline from the transmitter is bolted to it. Typically the mast will have a radio frequency AC potential of several thousand volts on it with respect to ground during operation.

Aviation regulations require that radio towers have aircraft warning lights along their length, so the tower will be visible to aircraft at night.[2] The high voltage on the tower poses a problem with powering the lights. The power cable that runs down the tower and connects to the utility line is at the high voltage of the mast. Without protective equipment the current from the mast would flow down the cable to the power line ground, short-circuiting the mast. To prevent this, a protective isolator device is installed in the lighting power cable at the base of the mast which blocks the radio frequency power while allowing the 50/60 hertz AC mains power for the lights through.

Use and mechanism edit

The Austin transformer is a specialized type of isolation transformer made specifically for this use, in which the primary and secondary windings of the transformer are separated by an air gap, wide enough so the high voltage on the antenna cannot jump across.[3][4] It consists of a ring-shaped toroidal iron core with the primary winding wrapped around it, mounted on a bracket from the mast's concrete base, connected to the lighting power source.[5] The secondary winding which provides power to the mast lights is a ring-shaped coil which circles the toroidal core through the center, like two links in a chain, with an air gap between the two. The magnetic field created by the primary winding induces current in the secondary winding without the necessity of a direct connection between them. The wide gap of several centimeters between the coils also ensures that there is minimal interwinding capacitance, to prevent RF voltage being induced in the supply wiring by capacitive coupling.

References edit

  1. ^ Austin insulators history, retrieved 2010 Nov 1
  2. ^ Laport, Edmund (1952). Radio Antenna Engineering. New York: McGraw-Hill Book Co. pp. 143–144. OCLC 758264513.
  3. ^ It is formed of two interlocking rings: one with the transformer core and primary windings, much like a conventional toroidal transformer and the other with the secondary windings. The secondary is wound like in a typical toroidal transformer but with a very large diameter to reduce interwinding capacitance and undesired capacitive coupling of RF energy. The power from primary to secondary is transferred by inductive coupling. It is used for providing power to the aircraft warning lights and other devices on a mast radiator antenna insulated from ground. In the Austin transformer the primary and secondary windings are separated by a large air gap, so that the high voltage and AM RF energy on the mast cannot couple into the low voltage lighting supply wiring, causing safety hazards and electromagnetic compatibility issues. Griffith, B. Whitfield (2000). "Practical operation of the vertical antenna". Radio-electronic transmission fundamentals (2nd ed.). Sci Tech Publishing. p. 367. ISBN 1-884932-13-4.
  4. ^ Mehla, Ishwar Singh (2018). AM Radio Tower Antennas. Chennai, India: Notion Press. Section 4.3.1(a). ISBN 978-1-64429-518-2.
  5. ^ Lockwood, Stephen S.; Cox, Bobby L. New tools to co-locate wireless devices with AM antennas (PDF) (Report). Kintronic Labs, Inc. Retrieved 7 April 2020.

External links edit

  • "Picture of an Austin transformer at a broadcast transmitter site". Retrieved 2020-04-12.

austin, transformer, austin, ring, transformer, special, type, isolation, transformer, with, capacitance, high, isolation, between, primary, secondary, austin, ring, transformer, base, wmca, wnyc, transmitting, tower, kearny, jersey, interlocking, rings, prima. An Austin ring transformer is a special type of isolation transformer with low capacitance and high isolation between the primary and secondary Austin ring transformer at the base of a WMCA and WNYC AM transmitting tower in Kearny New Jersey The two interlocking rings are the primary and secondary transformer windings The spherical objects directly below and to the right of the windings are a Spark ball gap for lightning protection Contents 1 Etymology 2 Background 3 Use and mechanism 4 References 5 External linksEtymology editIt is named after its inventor Arthur O Austin who graduated from Stanford University in 1903 and who obtained 225 patents in his career 1 Background editAM radio stations that broadcast in the medium frequency MF and low frequency LF bands typically use a type of antenna called a base fed mast radiator This is a tall radio mast in which the steel mast structure itself is energized and serves as the antenna The mast is mounted on a ceramic insulator to isolate it from the ground and the feedline from the transmitter is bolted to it Typically the mast will have a radio frequency AC potential of several thousand volts on it with respect to ground during operation Aviation regulations require that radio towers have aircraft warning lights along their length so the tower will be visible to aircraft at night 2 The high voltage on the tower poses a problem with powering the lights The power cable that runs down the tower and connects to the utility line is at the high voltage of the mast Without protective equipment the current from the mast would flow down the cable to the power line ground short circuiting the mast To prevent this a protective isolator device is installed in the lighting power cable at the base of the mast which blocks the radio frequency power while allowing the 50 60 hertz AC mains power for the lights through Use and mechanism editThe Austin transformer is a specialized type of isolation transformer made specifically for this use in which the primary and secondary windings of the transformer are separated by an air gap wide enough so the high voltage on the antenna cannot jump across 3 4 It consists of a ring shaped toroidal iron core with the primary winding wrapped around it mounted on a bracket from the mast s concrete base connected to the lighting power source 5 The secondary winding which provides power to the mast lights is a ring shaped coil which circles the toroidal core through the center like two links in a chain with an air gap between the two The magnetic field created by the primary winding induces current in the secondary winding without the necessity of a direct connection between them The wide gap of several centimeters between the coils also ensures that there is minimal interwinding capacitance to prevent RF voltage being induced in the supply wiring by capacitive coupling References edit Austin insulators history retrieved 2010 Nov 1 Laport Edmund 1952 Radio Antenna Engineering New York McGraw Hill Book Co pp 143 144 OCLC 758264513 It is formed of two interlocking rings one with the transformer core and primary windings much like a conventional toroidal transformer and the other with the secondary windings The secondary is wound like in a typical toroidal transformer but with a very large diameter to reduce interwinding capacitance and undesired capacitive coupling of RF energy The power from primary to secondary is transferred by inductive coupling It is used for providing power to the aircraft warning lights and other devices on a mast radiator antenna insulated from ground In the Austin transformer the primary and secondary windings are separated by a large air gap so that the high voltage and AM RF energy on the mast cannot couple into the low voltage lighting supply wiring causing safety hazards and electromagnetic compatibility issues Griffith B Whitfield 2000 Practical operation of the vertical antenna Radio electronic transmission fundamentals 2nd ed Sci Tech Publishing p 367 ISBN 1 884932 13 4 Mehla Ishwar Singh 2018 AM Radio Tower Antennas Chennai India Notion Press Section 4 3 1 a ISBN 978 1 64429 518 2 Lockwood Stephen S Cox Bobby L New tools to co locate wireless devices with AM antennas PDF Report Kintronic Labs Inc Retrieved 7 April 2020 External links edit Picture of an Austin transformer at a broadcast transmitter site Retrieved 2020 04 12 Retrieved from https en wikipedia org w index php title Austin transformer amp oldid 1217357201, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.