ʻUlīʻulī are Hawaiian feathered gourd rattles that are occasionally used as instruments in the traditional Hawaiian dance, hula.[1] This instrument is used in both ʻauana and kahiko hula dances. They are vibrantly colored feather gourd rattles used in kahiko performances to maintain timing and to enhance other sounds like chanting or the pounding of an ipu.
ʻUlīʻulī are made from Calabash gourds filled with sand, aliʻi poe seeds, or pebbles. The handle is made of strips of rattan. The top of the instrument is made of kapa. Assorted feathers are gathered to be applied to the top as a cap.[2]
ConstructionEdit
The ʻulīʻulī are made of various materials and take time to assemble properly. To make the base where the rattling sound is made, a calabash gourd is hollowed out and dried until hardened. Once the gourd is dried, it is filled with aliʻi poe (Canna) seeds. The base filled with the aliʻi poe seeds, is then attached to a stick wrapped with rattan for the handle by making holes at the top of the gourd and looping the strips of rattan through the holes. Kapa material is used for the cap and attached to the top end of the handle. Assorted feathers, commonly red and yellow feathers or hackle feathers, are attached to make the cap covering the top of the instrument. Some ʻulīʻulī are made with kapa material attached to the center of the feather cap. Patterns stamped on the kapa material using ʻohe kāpala, flat carved bamboo sticks. Several plants like achiote, ʻōlenaturmeric, ʻukiʻukiDianella sandwicensis, noniIndian mulberry, kukuicandlenut tree, and ʻākala raspberry can be ground up and mixed with water to make natural ink dyes for stamping designs onto the kapa.[3]
Traditional usesEdit
ʻUlīʻulī are used in traditional Hawaiian hula dances. Hula dancers make rattling sounds with the ʻulīʻulī by shaking or tapping the base against the body. Hula kahiko are performed to honor the gods and entertain the royal court while preserving orally transmitted narratives and genealogies. ʻUlīʻulī are used in kahiko performances to maintain timing and to enhance sounds created simultaneously through chanting and other instruments like the ipu and pūʻili. Hula ʻauana, a more modern style of hula, are performed for a larger, global audience and have broadened meanings to incorporate narratives about love and Hawaiian identity.
Other Hawaiian instrumentsEdit
IpuEdit
Ipu is a percussion instrument made from gourds that is often used to provide a beat for hula dancing.
PūʻiliEdit
Pūʻili are wooden rhythm sticks used in pairs by dancers. Pūʻili are made from bamboo and are about 20 inches in length. Slits are cut in the bamboo lengthwise with strands removed so that the bamboo rattles when moved.
ʻIliʻiliEdit
ʻIliʻili are water-worn lava stones used by dancers in a staccato rhythm during a dance. Depending on the hula performed, dancers hold two stones in each hand, similar to how chopsticks are held, and make clicking noises by striking the stones together.
Drums: pahu and kiluEdit
The pahu, or hula drum, is considered to be a sacred instrument and is the primary instrument used by the kumu hula also known as the instructors. The pahu guides the dancers, dictating the pace of the dance with the rhythm of the drum. Dancers place the drum on the ground or strap it to their thigh and play it during the hula. Another drum used is the small, light-weight knee drum called a kilu, also known as a pūniu, which is made out of a half coconut and covered with animal skin. The drum usually accompanies the pahu. In the past, pahu drums were usually made of breadfruit trees, the use of coconut wood is becoming more prevalent. The drums range from one to four feet in height. In pre-contact Hawaii the covering of the pahu drum was made with shark skin, but now the shark skin has been substituted with cow hide.
ReferencesEdit
^"Instruments | Ka ʻImi Naʻauao O Hawaiʻi Nei Institute". kaimi.org. Retrieved 2018-10-15.
^Jerry, Hopkins (1988). How to make your own Hawaiian musical instruments. Charlot, Martin. Honolulu, HI: Bess Press. ISBN0935848665. OCLC 19665619.
Further readingEdit
"Rattle (ʻUliʻUli), Hawaii, Mid-20th Century." Images from the Beedle Gallery, The University of South Dakota.
"Uli Uli." Met Museum, The Metropolitan Museum of Art, www.metmuseum.org/art/collection/search/501366
Widess, Jim. How to Make Hawaiian Musical Instruments: a Step-by-Step Guide. Mutual Pub., 2002.
"Hula Instruments of the Merrie Monarch Festival." Hawaii Real Estate Market & Trends | Hawaii Life, Hawaiʻi Life, 9 Apr. 2015, www.hawaiilife.com/blog/hula-instruments-merrie-monarch/.
ʻuliʻuli, ʻulīʻulī, hawaiian, feathered, gourd, rattles, that, occasionally, used, instruments, traditional, hawaiian, dance, hula, this, instrument, used, both, ʻauana, kahiko, hula, dances, they, vibrantly, colored, feather, gourd, rattles, used, kahiko, per. ʻUliʻuli are Hawaiian feathered gourd rattles that are occasionally used as instruments in the traditional Hawaiian dance hula 1 This instrument is used in both ʻauana and kahiko hula dances They are vibrantly colored feather gourd rattles used in kahiko performances to maintain timing and to enhance other sounds like chanting or the pounding of an ipu Contents 1 Materials 2 Construction 3 Traditional uses 4 Other Hawaiian instruments 4 1 Ipu 4 2 Puʻili 4 3 ʻIliʻili 4 4 Drums pahu and kilu 5 References 6 Further readingMaterials EditʻUliʻuli are made from Calabash gourds filled with sand aliʻi poe seeds or pebbles The handle is made of strips of rattan The top of the instrument is made of kapa Assorted feathers are gathered to be applied to the top as a cap 2 Construction EditThe ʻuliʻuli are made of various materials and take time to assemble properly To make the base where the rattling sound is made a calabash gourd is hollowed out and dried until hardened Once the gourd is dried it is filled with aliʻi poe Canna seeds The base filled with the aliʻi poe seeds is then attached to a stick wrapped with rattan for the handle by making holes at the top of the gourd and looping the strips of rattan through the holes Kapa material is used for the cap and attached to the top end of the handle Assorted feathers commonly red and yellow feathers or hackle feathers are attached to make the cap covering the top of the instrument Some ʻuliʻuli are made with kapa material attached to the center of the feather cap Patterns stamped on the kapa material using ʻohe kapala flat carved bamboo sticks Several plants like achiote ʻōlena turmeric ʻukiʻuki Dianella sandwicensis noni Indian mulberry kukui candlenut tree and ʻakala raspberry can be ground up and mixed with water to make natural ink dyes for stamping designs onto the kapa 3 Traditional uses EditʻUliʻuli are used in traditional Hawaiian hula dances Hula dancers make rattling sounds with the ʻuliʻuli by shaking or tapping the base against the body Hula kahiko are performed to honor the gods and entertain the royal court while preserving orally transmitted narratives and genealogies ʻUliʻuli are used in kahiko performances to maintain timing and to enhance sounds created simultaneously through chanting and other instruments like the ipu and puʻili Hula ʻauana a more modern style of hula are performed for a larger global audience and have broadened meanings to incorporate narratives about love and Hawaiian identity Other Hawaiian instruments EditIpu Edit Ipu is a percussion instrument made from gourds that is often used to provide a beat for hula dancing Puʻili Edit Puʻili are wooden rhythm sticks used in pairs by dancers Puʻili are made from bamboo and are about 20 inches in length Slits are cut in the bamboo lengthwise with strands removed so that the bamboo rattles when moved ʻIliʻili Edit ʻIliʻili are water worn lava stones used by dancers in a staccato rhythm during a dance Depending on the hula performed dancers hold two stones in each hand similar to how chopsticks are held and make clicking noises by striking the stones together Drums pahu and kilu Edit The pahu or hula drum is considered to be a sacred instrument and is the primary instrument used by the kumu hula also known as the instructors The pahu guides the dancers dictating the pace of the dance with the rhythm of the drum Dancers place the drum on the ground or strap it to their thigh and play it during the hula Another drum used is the small light weight knee drum called a kilu also known as a puniu which is made out of a half coconut and covered with animal skin The drum usually accompanies the pahu In the past pahu drums were usually made of breadfruit trees the use of coconut wood is becoming more prevalent The drums range from one to four feet in height In pre contact Hawaii the covering of the pahu drum was made with shark skin but now the shark skin has been substituted with cow hide References Edit Instruments Ka ʻImi Naʻauao O Hawaiʻi Nei Institute kaimi org Retrieved 2018 10 15 ʻUliʻUli metmuseum org Retrieved 2018 10 15 Jerry Hopkins 1988 How to make your own Hawaiian musical instruments Charlot Martin Honolulu HI Bess Press ISBN 0935848665 OCLC 19665619 Further reading Edit Rattle ʻUliʻUli Hawaii Mid 20th Century Images from the Beedle Gallery The University of South Dakota Uli Uli Met Museum The Metropolitan Museum of Art www metmuseum org art collection search 501366 Widess Jim How to Make Hawaiian Musical Instruments a Step by Step Guide Mutual Pub 2002 Hula Instruments of the Merrie Monarch Festival Hawaii Real Estate Market amp Trends Hawaii Life Hawaiʻi Life 9 Apr 2015 www hawaiilife com blog hula instruments merrie monarch McKenzi Emily Object ʻUli ʻUli Gourd Rattle Ethnology Snomnh 14 Mar 2014 ethnology wordpress com 2014 03 14 object uli uli gourd rattle Implements and Instruments Database Hula Preservation Society Hula Preservation Society www hulapreservation org implement asp ID 1 Retrieved from https en wikipedia org w index php title ʻUliʻuli amp oldid 1136105457, wikipedia, wiki, book, books, library,
