Williams spray equation

In combustion, the Williams spray equation, also known as the Williams–Boltzmann equation, describes the statistical evolution of sprays contained in another fluid, analogous to the Boltzmann equation for the molecules, named after Forman A. Williams, who derived the equation in 1958.^[1][2]

Mathematical description^[3]

The sprays are assumed to be spherical with radius ${\displaystyle r}$ , even though the assumption is valid for solid particles(liquid droplets) when their shape has no consequence on the combustion. For liquid droplets to be nearly spherical, the spray has to be dilute(total volume occupied by the sprays is much less than the volume of the gas) and the Weber number ${\displaystyle We=2r\rho _{g}|\mathbf {v} -\mathbf {u} |^{2}/\sigma }$ , where ${\displaystyle \rho _{g}}$  is the gas density, ${\displaystyle \mathbf {v} }$  is the spray droplet velocity, ${\displaystyle \mathbf {u} }$  is the gas velocity and ${\displaystyle \sigma }$  is the surface tension of the liquid spray, should be ${\displaystyle We\ll 10}$ .

The equation is described by a number density function ${\displaystyle f_{j}(r,\mathbf {x} ,\mathbf {v} ,T,t)\,dr\,d\mathbf {x} \,d\mathbf {v} \,dT}$ , which represents the probable number of spray particles (droplets) of chemical species ${\displaystyle j}$  (of ${\displaystyle M}$  total species), that one can find with radii between ${\displaystyle r}$  and ${\displaystyle r+dr}$ , located in the spatial range between ${\displaystyle \mathbf {x} }$  and ${\displaystyle \mathbf {x} +d\mathbf {x} }$ , traveling with a velocity in between ${\displaystyle \mathbf {v} }$  and ${\displaystyle \mathbf {v} +d\mathbf {v} }$ , having the temperature in between ${\displaystyle T}$  and ${\displaystyle T+dT}$  at time ${\displaystyle t}$ . Then the spray equation for the evolution of this density function is given by

${\displaystyle {\frac {\partial f_{j}}{\partial t}}+\nabla _{x}\cdot (\mathbf {v} f_{j})+\nabla _{v}\cdot (F_{j}f_{j})=-{\frac {\partial }{\partial r}}(R_{j}f_{j})-{\frac {\partial }{\partial T}}(E_{j}f_{j})+Q_{j}+\Gamma _{j},\quad j=1,2,\ldots ,M.}$ 

where

${\displaystyle F_{j}=\left({\frac {d\mathbf {v} }{dt}}\right)_{j}}$  is the force per unit mass acting on the ${\displaystyle j^{\text{th}}}$  species spray (acceleration applied to the sprays),

${\displaystyle R_{j}=\left({\frac {dr}{dt}}\right)_{j}}$  is the rate of change of the size of the ${\displaystyle j^{\text{th}}}$  species spray,

${\displaystyle E_{j}=\left({\frac {dT}{dt}}\right)_{j}}$  is the rate of change of the temperature of the ${\displaystyle j^{\text{th}}}$  species spray due to heat transfer,^[4]

${\displaystyle Q_{j}}$  is the rate of change of number density function of ${\displaystyle j^{\text{th}}}$  species spray due to nucleation, liquid breakup etc.,

${\displaystyle \Gamma _{j}}$  is the rate of change of number density function of ${\displaystyle j^{\text{th}}}$  species spray due to collision with other spray particles.

A simplified model for liquid propellant rocket

This model for the rocket motor was developed by Probert,^[5] Williams^[1][6] and Tanasawa.^[7][8] It is reasonable to neglect ${\displaystyle Q_{j},\ \Gamma _{j}}$ , for distances not very close to the spray atomizer, where major portion of combustion occurs. Consider a one-dimensional liquid-propellent rocket motor situated at ${\displaystyle x=0}$ , where fuel is sprayed. Neglecting ${\displaystyle E_{j}}$ (density function is defined without the temperature so accordingly dimensions of ${\displaystyle f_{j}}$  changes) and due to the fact that the mean flow is parallel to ${\displaystyle x}$  axis, the steady spray equation reduces to

${\displaystyle {\frac {\partial }{\partial r}}(R_{j}f_{j})+{\frac {\partial }{\partial x}}(u_{j}f_{j})+{\frac {\partial }{\partial u_{j}}}(F_{j}f_{j})=0}$ 

where ${\displaystyle u_{j}}$  is the velocity in ${\displaystyle x}$  direction. Integrating with respect to the velocity results

${\displaystyle {\frac {\partial }{\partial r}}\left(\int R_{j}f_{j}\,du_{j}\right)+{\frac {\partial }{\partial x}}\left(\int u_{j}f_{j}\,du_{j}\right)+[F_{j}f_{j}]_{0}^{\infty }=0}$ 

The contribution from the last term (spray acceleration term) becomes zero (using Divergence theorem) since ${\displaystyle f_{j}\rightarrow 0}$  when ${\displaystyle u}$  is very large, which is typically the case in rocket motors. The drop size rate ${\displaystyle R_{j}}$  is well modeled using vaporization mechanisms as

${\displaystyle R_{j}=-{\frac {\chi _{j}}{r^{k_{j}}}},\quad \chi _{j}\geq 0,\quad 0\leq k_{j}\leq 1}$ 

where ${\displaystyle \chi _{j}}$  is independent of ${\displaystyle r}$ , but can depend on the surrounding gas. Defining the number of droplets per unit volume per unit radius and average quantities averaged over velocities,

${\displaystyle G_{j}=\int f_{j}\,du_{j},\quad {\bar {R}}_{j}={\frac {\int R_{j}f_{j}\,du_{j}}{G_{j}}},\quad {\bar {u}}_{j}={\frac {\int u_{j}f_{j}\,du_{j}}{G_{j}}}}$ 

the equation becomes

${\displaystyle {\frac {\partial }{\partial r}}({\bar {R}}_{j}G_{j})+{\frac {\partial }{\partial x}}({\bar {u}}_{j}G_{j})=0.}$ 

If further assumed that ${\displaystyle {\bar {u}}_{j}}$  is independent of ${\displaystyle r}$ , and with a transformed coordinate

${\displaystyle \eta _{j}=\left[r^{k_{j}+1}+(k_{j}+1)\int _{0}^{x}{\frac {\chi _{j}}{{\bar {u}}_{j}}}\,dx\right]^{1/(k_{j}+1)}}$ 

If the combustion chamber has varying cross-section area ${\displaystyle A(x)}$ , a known function for ${\displaystyle x>0}$  and with area ${\displaystyle A_{o}}$  at the spraying location, then the solution is given by

${\displaystyle G_{j}(\eta _{j})=G_{j,o}(\eta _{j}){\frac {A_{o}{\bar {u}}_{j,o}}{A{\bar {u}}_{j}}}\left({\frac {r}{\eta _{j}}}\right)^{k_{j}}}$ .

where ${\displaystyle G_{j,0}=G_{j}(r,0),\ {\bar {u}}_{j,0}={\bar {u}}_{j}(x=0)}$  are the number distribution and mean velocity at ${\displaystyle x=0}$  respectively.

See also

• Boltzmann equation
• Spray (liquid drop)
• Liquid-propellant rocket
• Smoluchowski coagulation equation

References

1. Williams, F. A. (1958). "Spray Combustion and Atomization". Physics of Fluids. 1 (6). AIP Publishing: 541. Bibcode:1958PhFl....1..541W. doi:10.1063/1.1724379. ISSN 0031-9171.
2. Williams, F.A. (1961). "Progress in spray-combustion analysis". Symposium (International) on Combustion. 8 (1). Elsevier BV: 50–69. doi:10.1016/s0082-0784(06)80487-x. ISSN 0082-0784.
3. Williams, F. A. (1985). Combustion theory : the fundamental theory of chemically reacting flow systems. Redwood City, Calif: Addison/Wesley Pub. Co. ISBN 978-0-201-40777-8. OCLC 26785266.
4. Emre, O.; Kah, D.; Jay, Stephane; Tran, Q.-H.; Velghe, A.; de Chaisemartin, S.; Fox, R. O.; Laurent, F.; Massot, M. (2015). "Eulerian Moment Methods for Automotive Sprays" (PDF). Atomization and Sprays. 25 (3). Begell House: 189–254. doi:10.1615/atomizspr.2015011204. ISSN 1044-5110.
5. Probert, R.P. (1946). "XV. The influence of spray particle size and distribution in the combustion of oil droplets". The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. 37 (265). Informa UK Limited: 94–105. doi:10.1080/14786444608561330. ISSN 1941-5982.
6. Williams, F. A. "Introduction to Analytical Models of High Frequency Combustion Instability,”." Eighth Symposium (International) on Combustion. Williams and Wilkins. 1962.
7. Tanasawa, Y. "On the Combustion Rate of a Group of Fuel Particles Injected Through a Swirl Nozzle." Technology Reports of Tohoku University 18 (1954): 195–208.
8. TANASAWA, Yasusi; TESIMA, Tuneo (1958). "On the Theory of Combustion Rate of Liquid Fuel Spray". Bulletin of JSME. 1 (1): 36–41. doi:10.1299/jsme1958.1.36. ISSN 1881-1426.