TracePro is a commercial optical engineering software program for designing and analyzing optical and illumination systems. The program's graphical user interface (GUI) is 3D CAD-based creating a virtual prototyping environment to perform software simulation before manufacture.
Developed by Lambda Research Corporation of Littleton, Massachusetts, USA, under an SBIR grant from NASA, the program has been in continual development since 1994. NASA uses the program in its next-generation integrated design manufacturing approach as detailed in NASA's Spinoff magazine.[1]
Marketsedit
TracePro is used in the aerospace, defense, lighting, display, biomedical and illumination markets. It has been used in many projects for designing and analyzing all types of optical/illumination systems ranging from stray light suppression in telescopes and cameras to biomedical applications[2] to LED modeling[3] and solar collector modeling.[4]
In the aerospace market, TracePro is best known for its stray light analysis capabilities. The program was used to analyze the FIRST Telescope,[5]James Webb Space Telescope, the Mars Rover cameras, Long-Range Reconnaissance Imager (LORRI) [6] and the Terrestrial Planet Finder Coronagraph.[7]
The TracePro approachedit
Users create geometry either by using the native TracePro CAD interface or by importing models directly from SolidWorks, Pro/ENGINEER, Solid Edge, Autodesk Inventor or other CAD product that exports IGES or STEP models. TracePro additionally has an add-in to Solidworks, RayViz. RayViz allows users to apply and save optical properties directly to their SolidWorks model and ray trace surface sources as raysets to visualize light propagation within Solidworks. To ensure data integrity, a single model is used by both TracePro for ray tracing and optical analysis and by SolidWorks for mechanical design and modifying optical material properties. With RayViz, users significantly accelerate the iterative design process. Users using optical design programs such as OSLO, Zemax or Code V can also import these models to create a complete optomechanical design using the built-in multi-document interface. After creating the optical-mechanical model users then create sources using built-in source wizards, import models from the bulb catalogs or import ray files created from measured data, measured by Radiant Imaging's ProSource Radiant Source product. Then rays are traced through the systems to find energy distributions on any surface or track volume flux through any space. Users can also simulate lit appearance of illumination or lighting systems and trace bitmap images through optical systems to check for uniformity, veiling glare, flare, and distortion issues. Thermal effects and stray light issues can also be simulated.
Compatibilityedit
TracePro works with other software products using a Dynamic Data Exchange (DDE) client/server interface. This enables the program to work with products such as MATLAB to create a multi-disciplinary environment.[8] TracePro also uses the Scheme language as a macro language to extend the program's capabilities and provide automated analysis, optimization, and tolerancing capabilities. TracePro models geometry using the Kubotek Kosmos 3D Framework.[9]
Editionsedit
TracePro optical software is available in three commercial editions:
^Edward Freniere, Richard Hassler, Eric Heinz, and Linda Smith, “Design for manufacturability (DFM) in the life sciences: fluorescence spectroscopy product platform realized with TracePro suite of opto-mechanical design software tools”, Proc. SPIE6430, 64301U (2007)
^Chao-hsi Tsao, Edward R. Freniere, and Linda Smith, “Improved predictive Modeling of white LEDs with accurate luminescence simulation and practical inputs using TracePro Opto-Mechanical design software”, Proc. SPIE, Vol. 7231, pp. 723111-723111-12 (2009)
^Meyer, T. J. J.; Hlavaty, J.; Smith, L.; Freniere, E. R.; Markvart, T., “Ray racing techniques applied to the modelling of fluorescent solar collectors”, Proc. SPIE, Vol. 7211, pp. 72110N-72110N-11 (2009)
^Eri J. Cohen, Anthony B. Hull, Javier Escobedo-Torres, Daniel D. Barber, Roger A. Johnston, Donald W. Small, Aluizio Prata, Jr., and Edward R. Freniere, “Optical design of the ultralight-weight FIRST telescope”, Proc. SPIE4015, p. 559 (2000)
^"Long Range Reconnaissance Imager (LORRI) Instrument | NASA". 26 March 2015.
^(PDF). Archived from the original (PDF) on 2009-05-13. Retrieved 2009-05-04.{{cite web}}: CS1 maint: archived copy as title (link)
tracepro, commercial, optical, engineering, software, program, designing, analyzing, optical, illumination, systems, program, graphical, user, interface, based, creating, virtual, prototyping, environment, perform, software, simulation, before, manufacture, co. TracePro is a commercial optical engineering software program for designing and analyzing optical and illumination systems The program s graphical user interface GUI is 3D CAD based creating a virtual prototyping environment to perform software simulation before manufacture Contents 1 History 2 Markets 3 The TracePro approach 4 Compatibility 5 Editions 6 See also 6 1 References 7 External linksHistory editDeveloped by Lambda Research Corporation of Littleton Massachusetts USA under an SBIR grant from NASA the program has been in continual development since 1994 NASA uses the program in its next generation integrated design manufacturing approach as detailed in NASA s Spinoff magazine 1 Markets editTracePro is used in the aerospace defense lighting display biomedical and illumination markets It has been used in many projects for designing and analyzing all types of optical illumination systems ranging from stray light suppression in telescopes and cameras to biomedical applications 2 to LED modeling 3 and solar collector modeling 4 In the aerospace market TracePro is best known for its stray light analysis capabilities The program was used to analyze the FIRST Telescope 5 James Webb Space Telescope the Mars Rover cameras Long Range Reconnaissance Imager LORRI 6 and the Terrestrial Planet Finder Coronagraph 7 The TracePro approach editUsers create geometry either by using the native TracePro CAD interface or by importing models directly from SolidWorks Pro ENGINEER Solid Edge Autodesk Inventor or other CAD product that exports IGES or STEP models TracePro additionally has an add in to Solidworks RayViz RayViz allows users to apply and save optical properties directly to their SolidWorks model and ray trace surface sources as raysets to visualize light propagation within Solidworks To ensure data integrity a single model is used by both TracePro for ray tracing and optical analysis and by SolidWorks for mechanical design and modifying optical material properties With RayViz users significantly accelerate the iterative design process Users using optical design programs such as OSLO Zemax or Code V can also import these models to create a complete optomechanical design using the built in multi document interface After creating the optical mechanical model users then create sources using built in source wizards import models from the bulb catalogs or import ray files created from measured data measured by Radiant Imaging s ProSource Radiant Source product Then rays are traced through the systems to find energy distributions on any surface or track volume flux through any space Users can also simulate lit appearance of illumination or lighting systems and trace bitmap images through optical systems to check for uniformity veiling glare flare and distortion issues Thermal effects and stray light issues can also be simulated Compatibility editTracePro works with other software products using a Dynamic Data Exchange DDE client server interface This enables the program to work with products such as MATLAB to create a multi disciplinary environment 8 TracePro also uses the Scheme language as a macro language to extend the program s capabilities and provide automated analysis optimization and tolerancing capabilities TracePro models geometry using the Kubotek Kosmos 3D Framework 9 Editions editTracePro optical software is available in three commercial editions TracePro LC TracePro Standard TracePro ExpertSee also editSolidWorks and SolidWorks Corporation have a formal partnership with Lambda Research Organization Optics Software for Layout and Optimization TracePro imports OSLO design files and is a compatible product from Lambda Research Corporation Optical engineering Optical lens design Ray tracing physics References edit Stray Light Analysis NASA Spinoff Edward Freniere Richard Hassler Eric Heinz and Linda Smith Design for manufacturability DFM in the life sciences fluorescence spectroscopy product platform realized with TracePro suite of opto mechanical design software tools Proc SPIE 6430 64301U 2007 Chao hsi Tsao Edward R Freniere and Linda Smith Improved predictive Modeling of white LEDs with accurate luminescence simulation and practical inputs using TracePro Opto Mechanical design software Proc SPIE Vol 7231 pp 723111 723111 12 2009 Meyer T J J Hlavaty J Smith L Freniere E R Markvart T Ray racing techniques applied to the modelling of fluorescent solar collectors Proc SPIE Vol 7211 pp 72110N 72110N 11 2009 Eri J Cohen Anthony B Hull Javier Escobedo Torres Daniel D Barber Roger A Johnston Donald W Small Aluizio Prata Jr and Edward R Freniere Optical design of the ultralight weight FIRST telescope Proc SPIE 4015 p 559 2000 Long Range Reconnaissance Imager LORRI Instrument NASA 26 March 2015 Archived copy PDF Archived from the original PDF on 2009 05 13 Retrieved 2009 05 04 a href Template Cite web html title Template Cite web cite web a CS1 maint archived copy as title link https www lambdares com wp content uploads support tracepro tracepro tools Working 20with 20MATLAB 20and 20TracePro pdf bare URL PDF Geometric Software Components KubotekKosmos com External links editLambda Research website Retrieved from https en wikipedia org w index php title TracePro amp oldid 1157133548, wikipedia, wiki, book, books, library,
