After World War II, Hungary, like many of the war-torn European countries, suffered a severe shortage of motive power, with much of the MÁV stock either damaged, destroyed, or confiscated by German forces to replace their damaged equipment. The US Government offered Hungary a $150 million commodity loan and a part of this was used to purchase 510 pieces of the USATC S160 Class steam locomotives, for $10,000 each. The negotiations started in 1946, with the first engines arriving in May 1947. The origins of the Hungarian S160s were as follows:
In their delivery state 425 locomotives were set up as coal burners while 85 engines were oil burners, the engines could easily be converted from one fuel to the other as needed.
The locomotives were classified due to their four driven axles and an axle load higher than 14.3 metric tons as MÁV Class 411. The Hungarian series numbering followed neither the manufacturer's name or number, nor the production date, but the arrival date in Hungary. The poorest quality 28 engines got no MÁV numbers, these were preserved as component sources for later repairs. MÁV immediately performed tests to find out load characteristics, loading and braking tables were created. By January 1948, 405 locomotives were already prepared for service.
Modifications
Unlike many other European users of the S160 locomotives MÁV considered these engines as a medium-term solution and decided to change many details on them. These changes were performed during a longer period, up to the 1960s. The most important and well visible changes were the following ones:
Lifting the cab roof height by 30 cm by welding a horizontal steel strip into cab side and front. This was necessary as the Class S160 engines were designed to negotiate the low British clearances and were very low-pitched for usual personnel.
Replacing the square front windows and the left side front door by standard oval windows.
Adding a protection cover for the turret on the longboiler top in front of the cab.
Moving the air pump from the smokebox front to the smokebox left side.
Increasing the stack height
Replacing the steam engine brake with an air brake
Adding train heating hose and coupling
Lifting the tender coal bunker bottom height
Replacing the American whistle with a MÁV standard one
Class 411 locomotives hauled mainly medium size freight trains, as well as occasional passenger trains. They were considered as reliable and handsome engines with considerable reserves.
Withdrawal
411,358 at Hegyeshalom station
Their withdrawal started in 1965 and continued by scrapping 15-30 locomotives every year. In 1980 only 6 pieces remained; they were withdrawn in the following three years. According to preservation lists,[1] three Class 411 machines are preserved in Hungary:
The 411,144 was originally intended to be preserved with the Hungarian National Collection, but was mistakenly sent to be scrapped. Fortunately, the 411,144 was purchased in 1992 by Martin Haines for the Milton-Keynes Locomotion & Navigation (GB), and is now preserved at the Churnet Valley Railway, along with another S160 from China. 411,388 was sold to the East Lancashire Railway in the same year, and is currently undergoing an overhaul at the Nottingham Transport Heritage Centre. The center also has received the remains of 411,380 and 411,337, which will be used as parts sources for 411,388. The boiler of 411.005 remains in Hungary.[2]
References
^Kirchner Attila; Soltész József; Tóth Sándor; Villányi György. (in Hungarian). Archived from the original on February 6, 2009. Retrieved January 2, 2008.
mÁv, class, this, article, needs, additional, citations, verification, please, help, improve, this, article, adding, citations, reliable, sources, unsourced, material, challenged, removed, find, sources, news, newspapers, books, scholar, jstor, october, 2015, . This article needs additional citations for verification Please help improve this article by adding citations to reliable sources Unsourced material may be challenged and removed Find sources MAV Class 411 news newspapers books scholar JSTOR October 2015 Learn how and when to remove this template message The MAV Class 411 was a class of steam locomotives used by Hungarian railways MAV Class 411Preserved MAV Class 411 number 411 118 in 2003Type and originPower typeSteamBuilderALCOBaldwinLimaBuild date1946 Total produced510SpecificationsConfiguration Whyte2 8 0Fuel typecoal or oilCareerNicknamesTrumansFirst run1947Withdrawn1965 1980Preserved411 118 411 144 411 264 411 358 411 388 411 380 and 411 337 as parts sources others of base S160 classDispositionMost scrapped 5 preserved 2 retained as parts sources Contents 1 History 2 Modifications 3 Withdrawal 4 References 5 External linksHistory EditAfter World War II Hungary like many of the war torn European countries suffered a severe shortage of motive power with much of the MAV stock either damaged destroyed or confiscated by German forces to replace their damaged equipment The US Government offered Hungary a 150 million commodity loan and a part of this was used to purchase 510 pieces of the USATC S160 Class steam locomotives for 10 000 each The negotiations started in 1946 with the first engines arriving in May 1947 The origins of the Hungarian S160s were as follows ALCO 159 pc Baldwin 148 pc Lima 203 pc In their delivery state 425 locomotives were set up as coal burners while 85 engines were oil burners the engines could easily be converted from one fuel to the other as needed The locomotives were classified due to their four driven axles and an axle load higher than 14 3 metric tons as MAV Class 411 The Hungarian series numbering followed neither the manufacturer s name or number nor the production date but the arrival date in Hungary The poorest quality 28 engines got no MAV numbers these were preserved as component sources for later repairs MAV immediately performed tests to find out load characteristics loading and braking tables were created By January 1948 405 locomotives were already prepared for service Modifications EditUnlike many other European users of the S160 locomotives MAV considered these engines as a medium term solution and decided to change many details on them These changes were performed during a longer period up to the 1960s The most important and well visible changes were the following ones Lifting the cab roof height by 30 cm by welding a horizontal steel strip into cab side and front This was necessary as the Class S160 engines were designed to negotiate the low British clearances and were very low pitched for usual personnel Replacing the square front windows and the left side front door by standard oval windows Adding a protection cover for the turret on the longboiler top in front of the cab Moving the air pump from the smokebox front to the smokebox left side Increasing the stack height Replacing the steam engine brake with an air brake Adding train heating hose and coupling Lifting the tender coal bunker bottom height Replacing the American whistle with a MAV standard oneClass 411 locomotives hauled mainly medium size freight trains as well as occasional passenger trains They were considered as reliable and handsome engines with considerable reserves Withdrawal Edit 411 358 at Hegyeshalom station Their withdrawal started in 1965 and continued by scrapping 15 30 locomotives every year In 1980 only 6 pieces remained they were withdrawn in the following three years According to preservation lists 1 three Class 411 machines are preserved in Hungary 411 118 Hungarian Railway Museum Budapest operational 411 264 Hatvan RR station plinthed 411 358 Hegyeshalom station plinthedThe 411 144 was originally intended to be preserved with the Hungarian National Collection but was mistakenly sent to be scrapped Fortunately the 411 144 was purchased in 1992 by Martin Haines for the Milton Keynes Locomotion amp Navigation GB and is now preserved at the Churnet Valley Railway along with another S160 from China 411 388 was sold to the East Lancashire Railway in the same year and is currently undergoing an overhaul at the Nottingham Transport Heritage Centre The center also has received the remains of 411 380 and 411 337 which will be used as parts sources for 411 388 The boiler of 411 005 remains in Hungary 2 References Edit Kirchner Attila Soltesz Jozsef Toth Sandor Villanyi Gyorgy Magyarorszagon megorzott mozdonyok in Hungarian Archived from the original on February 6 2009 Retrieved January 2 2008 Steam Locomotive Information External links Edit Wikimedia Commons has media related to MAV 411 Hungarian Railway Museum Retrieved from https en wikipedia org w index php title MAV Class 411 amp oldid 1099708912, wikipedia, wiki, book, books, library,
