fbpx
Wikipedia

Magnetically assisted slip casting

Magnetically assisted slip casting is a manufacturing technique that uses anisotropic stiff nanoparticle platelets in a ceramic, metal or polymer functional matrix to produce[1] layered objects that can mimic natural objects such as nacre. Each layer of platelets is oriented in a different direction, giving the resulting object greater strength. The inventors claimed that the process is 10x faster than commercial 3D printing. The magnetisation and orientation of the ceramic platelets has been patented.[2]

Technique edit

The technique involves pouring a suspension of magnetized ceramic micro-plates. Pores in the plaster mold absorb the liquid from the suspension, solidifying the material from the outside in. The particles are subjected to a strong magnetic field as they solidify that causes them to align in one direction. The field's orientation is changed at regular intervals, moving the plates still in suspension, without disturbing already-solidified plates. By varying the composition of the suspension and the direction of the platelets, a continuous process can produce multiple layers with differing material properties in a single object. The resulting objects can closely imitate their natural models.[2]

Artificial tooth edit

Researchers produced an artificial tooth whose microstructure mimicked that of a real tooth. The outer layers, corresponding to enamel, were hard and structurally complex. The outer layers contained glass nanoparticles and aluminium oxide plates were aligned perpendicular to the surface. After the outer layers hardened, a second suspension was poured. It contained no glass, and the plates were aligned horizontally to the surface of the tooth. These deeper layers were tougher, resembling dentine. The tooth was then cooked at 1,600 degrees to compact and harden the material — a process known as sintering. The last step involved filling remaining pores with a synthetic monomer used in dentistry, which polymerizes after treatment.[2] Hardness and durability approximated that of both the enamel and dentine of a tooth.[3]

See also edit

References edit

  1. ^ Le Ferrand, Hortense; Bouville, Florian; Niebel, Tobias P.; Studart, André R. (2015-09-21). "Magnetically assisted slip casting of bioinspired heterogeneous composites". Nature Materials. 14 (11): 1172–1179. arXiv:1605.07461. Bibcode:2015NatMa..14.1172L. doi:10.1038/nmat4419. ISSN 1476-4660. PMID 26390326. S2CID 37712925.
  2. ^ a b c Micu, Alexandru (September 29, 2015). "Artificial tooth is as good as the real deal". ZME. Retrieved 2015-09-29.
  3. ^ Watry, Greg (September 29, 2015). "Creating Fake Teeth as Strong as the Real Deal". R&D. Retrieved 2015-09-29.

magnetically, assisted, slip, casting, manufacturing, technique, that, uses, anisotropic, stiff, nanoparticle, platelets, ceramic, metal, polymer, functional, matrix, produce, layered, objects, that, mimic, natural, objects, such, nacre, each, layer, platelets. Magnetically assisted slip casting is a manufacturing technique that uses anisotropic stiff nanoparticle platelets in a ceramic metal or polymer functional matrix to produce 1 layered objects that can mimic natural objects such as nacre Each layer of platelets is oriented in a different direction giving the resulting object greater strength The inventors claimed that the process is 10x faster than commercial 3D printing The magnetisation and orientation of the ceramic platelets has been patented 2 Contents 1 Technique 2 Artificial tooth 3 See also 4 ReferencesTechnique editThe technique involves pouring a suspension of magnetized ceramic micro plates Pores in the plaster mold absorb the liquid from the suspension solidifying the material from the outside in The particles are subjected to a strong magnetic field as they solidify that causes them to align in one direction The field s orientation is changed at regular intervals moving the plates still in suspension without disturbing already solidified plates By varying the composition of the suspension and the direction of the platelets a continuous process can produce multiple layers with differing material properties in a single object The resulting objects can closely imitate their natural models 2 Artificial tooth editResearchers produced an artificial tooth whose microstructure mimicked that of a real tooth The outer layers corresponding to enamel were hard and structurally complex The outer layers contained glass nanoparticles and aluminium oxide plates were aligned perpendicular to the surface After the outer layers hardened a second suspension was poured It contained no glass and the plates were aligned horizontally to the surface of the tooth These deeper layers were tougher resembling dentine The tooth was then cooked at 1 600 degrees to compact and harden the material a process known as sintering The last step involved filling remaining pores with a synthetic monomer used in dentistry which polymerizes after treatment 2 Hardness and durability approximated that of both the enamel and dentine of a tooth 3 See also edit3D printing Continuous Liquid Interface ProductionReferences edit Le Ferrand Hortense Bouville Florian Niebel Tobias P Studart Andre R 2015 09 21 Magnetically assisted slip casting of bioinspired heterogeneous composites Nature Materials 14 11 1172 1179 arXiv 1605 07461 Bibcode 2015NatMa 14 1172L doi 10 1038 nmat4419 ISSN 1476 4660 PMID 26390326 S2CID 37712925 a b c Micu Alexandru September 29 2015 Artificial tooth is as good as the real deal ZME Retrieved 2015 09 29 Watry Greg September 29 2015 Creating Fake Teeth as Strong as the Real Deal R amp D Retrieved 2015 09 29 Retrieved from https en wikipedia org w index php title Magnetically assisted slip casting amp oldid 1074302895, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.