Chocolate bloom

Chocolate bloom is either of two types of whitish coating that can appear on the surface of chocolate: fat bloom, caused by changes in the fat crystals in the chocolate; and sugar bloom, due to crystals formed by the action of moisture on the sugar. Fat and sugar bloom damage the appearance of chocolate but do not limit its shelf life. Chocolate that has "bloomed" is still safe to eat (as it is a non-perishable food due to its sugar content), but may have an unappetizing appearance and surface texture.^[1] Chocolate bloom can be repaired by melting the chocolate down, stirring it, then pouring it into a mould and allowing it to cool, bringing the sugar or fat back into the solution.

Comparison of blooming (left) and regular chocolate bars

Bloom on chocolate filled with marzipan

Bloom on chocolate filled with marzipan viewed under optical microscope

Fat bloom

Fat bloom is the separation of the cocoa butter from the other components.^[2][3] Generally bloom arises from storage or age. Improper formulation exacerbates the problem. Lower melting point triglycerides in cocoa butter are more mobile than other constituents and migrate to the surface of the chocolate item.^[4][5]

Cocoa butter can be classified into polymorphic forms. Bloomed chocolates contain the most stable VI polymorph of cocoa butter. Bloom occurs through the uncontrolled polymorphic transformation of cocoa butter from a less stable form (form IV or V) to the most stable form (form VI). The technology of good chocolate production depends on ensuring that only the stable form of the cocoa butter ingredient exists in the final product. In poorly tempered chocolate, form IV will transform to V and eventually form VI, resulting in bloom, while in well-tempered chocolate, form V will transform to form VI and bloom may also occur. Elevated and/or fluctuating temperatures promote the transformation rate and thus also promote the rate of bloom formation. However, it is found that the production of form VI from form V does not always lead to bloom; a direct relationship cannot be established between fat bloom and the evolution of the crystalline forms. The onset of transformation from form V to form VI crystals is not the cause of visual bloom; rather, this transition should be considered as an aspect of cocoa butter recrystallization that may result in bloom.^[4]

Sugar bloom

While the most common is fat bloom, sugar bloom also occurs and is not necessarily distinguishable from the fat bloom by appearance. In freshly sugar bloomed samples, it is often easy to feel the surface difference; sugar bloom feels dry and does not melt to the touch, while fat bloom feels slick and melts. One can often see the difference by touching a small droplet of water to the surface. With fat bloom, the droplet simply beads up. With sugar bloom, the droplet quickly flattens and spreads, as the water dissolves the microscopic sugar particles on the surface. Alternatively, gentle warming of the surface (with a hairdryer, for example) will cause the crystals of fat bloom to melt, removing the appearance of bloom, while leaving sugar bloom unchanged.^[6]

Sugar bloom is caused by moisture. Condensation on to the surface of the chocolate or moisture in the chocolate coating causes the sugar to absorb the moisture and dissolve. When the moisture evaporates, the sugar forms larger crystals, leaving a dusty layer. It is caused by:

• Storage of chocolates in damp conditions
• Deposit of "dew" during manufacture from damp, cooler air or allowing chocolates to enter a packing room at a temperature below the dew point of that room
• Use of hygroscopic ingredients (low grade or brown sugars)
• High-temperature storage conditions of chocolate-covered confectionery, where the centers have a high relative humidity and the water vapor given off is trapped in the wrappings

Method to minimize sugar bloom

Sugar bloom can be reduced by maintaining an appropriate storage temperature for chocolate products. A psychrometric chart can be used to determine the temperature above which food must be maintained in order to avoid condensation.^[7]

References

1. Lonchampt, P.; Hartel, Richard W. (2004). "Fat bloom in chocolate and compound coatings". European Journal of Lipid Science and Technology. 106 (4): 241–274. doi:10.1002/ejlt.200400938.
2. Kleinert-Zollinger, Jürg; Beckett, Stephen T. (2006). "Chocolate". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a07_023.pub2. ISBN 978-3527306732.
3. Kinta, Yasuyoshi; Hatta, Tamao (2005). "Morphology of fat bloom in chocolate". Journal of the American Oil Chemists' Society. 82 (9): 685. doi:10.1007/s11746-005-1129-7.
4. McCarthy, J.; David, S.; Daijing, Wei (2003). "Fat Bloom in Chocolate" (PDF). The Manufacturing Confectioner: 89–93.
5. Minifie, Bernard W. (1989). Chocolate, Cocoa and Confectionery. Springer. pp. 646–663. ISBN 9780834213012.
6. Gillco, Team (2019-07-22). "WHAT IS CHOCOLATE BLOOMING?". Gillco Ingredients. Retrieved 2024-02-28.
7. "Is this sugar bloom and how to prevent it?". TheChocolateLife. Retrieved 2024-02-28.

Further reading

 

Wikimedia Commons has media related to Chocolate bloom.

• Beckett, T. Stephen. (2000). The Science of Chocolate, pp. 85–103. London: Royal Society of Chemistry. ISBN 9781788012355. OCLC 1098209624.