fbpx
Wikipedia

Changi Airport Skytrain

The Changi Airport Skytrain is an automated people mover (APM) that connects Terminals 1, 2 and 3 at Singapore Changi Airport. Opened in 1990, it was the first driverless and automated system of its kind in South East Asia.[2] The Changi Airport Skytrain operates from 05:00 to 02:30 daily.[3] Traveling on the Skytrain is free and an inter-terminal journey takes approximately four minutes.

Changi Airport Skytrain
Changi Airport SkyTrain Terminal 2 station
Overview
StatusOperational
OwnerChangi Airport Group
LocaleSingapore
Stations7
Service
TypeAutomated guideway transit/People mover
Services5
Operator(s)Changi Airport Group
Depot(s)Terminal 1
Rolling stockMitsubishi Crystal Mover (2006–present)
Adtranz C-100 (1990–2006)
History
Opened22 November 1990; 32 years ago (1990-11-22)
Technical
Line length10.3 km (6.4 mi)
CharacterFully elevated
Track gauge1,850 mm (6 ft 2732 in)
Guide rail span: 3.2 m (10 ft 6 in)
Electrification750 V DC third rail
SignallingKyosan APM fixed block ATC under ATO GoA 4 (UTO), with subsystems of ATP, ATS and CBI[1]
Route map

Terminal 1
Station C
Station D
Station B
Station E
Terminal 3
Terminal 2
Station A
Station F
Station A
South
Legend
PMS North:
Public and transit
PMS South:
Transit only

Since 2006, the trains operating on all Skytrain lines are Crystal Movers manufactured by Mitsubishi Heavy Industries. All stations are equipped with platform screen doors, are air-conditioned and have plasma displays indicating the arrival time of the next train.

With the opening of Changi Airport MRT station on 8 February 2002, the Skytrain is able to connect passengers at Terminal 1 to the MRT station entrances located at Terminals 2 and 3.[3]

History

In November 1990, alongside the opening of Changi Airport's second passenger terminal, the Skytrain began operations to connect the brand new Terminal 2 to the existing Terminal 1. It operated using the Adtranz C-100[4] and the ride lasted approximately 60 seconds.[5]

On 17 March 2006, the rolling stock was replaced with the current Mitsubishi Crystal Mover System. Services were extended to the newly opened Terminal 3 and the South section opened in November 2007 with 5 new stations.[6]

On 24 February 2015, services between Station B and E (Terminal 2 to 3 and vice versa) were suspended to make way for the construction of Jewel Changi Airport. The service was reopened to transit passengers on 12 April 2019, upon the opening of Jewel Changi Airport using a 3-car service. It was then fully reopened for the public and transit passengers in July 2019.[7]

In April 2020, due to the COVID-19 pandemic drastically reducing passenger volumes, services from Station B to E (T2 to T3) and Station A to F (T2 to T3) were suspended for all passengers, as well as Station B to C (T3 to T1) and Station D to E (T1 to T2) services for transit passengers. All Skytrain services were then fully suspended on 1 May 2020.

On 27 July 2020, services from Station B to C (T3 to T1) were resumed for public passengers only.

On 17 November 2022, services from Station B to E (T3 to T2) were resumed for public passengers only.

System

The Skytrain system consists of two independent systems: an airside-only PMS/South, which provides services between Terminals 2 and 3 and between Terminal 3 main building and South Pier, and a PMS/North that provides services between Terminals 1, 2 and 3 on both the landside and airside. The system use a bypass shuttle for services between Terminals 2 and 3 and single-lane shuttles for the rest of the system, with both the landside and airside having their own lanes.[4]

The system consists of seven stations (A-South, A, B, C, D, E and F), each giving the name of the nearest boarding gate for easy recognition for passengers.[4]

The Main Operation Control Center is located inside the maintenance office near A-South Station and the Standby Satellite Control Center is located in the center of the Terminal 3 building. Either of the control centers can be used to control the entire system.[4]

Rolling stock

Adtranz C-100

Initially, the Skytrain rolling stock consisted of Adtranz C-100s, jointly built by Westinghouse and Adtranz (acquired by Bombardier). Although stations were designed to accommodate two-car trains, the C-100 trains operated in single units, without a second carriage per train, and the two innermost platform screen doors of each station were for emergency purposes (the trains stopped at the outer half of each station, with two doors on each half).

Mitsubishi Heavy Industries Crystal Mover

Mitsubishi Heavy Industries Crystal Mover
 
Skytrain car entering terminal 3
 
Interior of the Skytrain Crystal Mover on PMS/North; trains on PMS/South feature orange seats
In service17 March 2006; 16 years ago (2006-03-17) – present
ManufacturerMitsubishi Heavy Industries
Built atMihara, Hiroshima
Family nameCrystal Mover
ReplacedAdtranz C-100
Constructed2002 – 2006
2016 – 2019 (Expansion)
Entered service2006
Number built22 vehicles
Number in service22 vehicles
FormationSingle vehicles that can be coupled to form 2- or 3-car trains
Fleet numbers01 – 22
Capacity8 seated, 107 standing
Operator(s)Changi Airport Group
Depot(s)Terminal 1
Line(s) servedAll Skytrain services
Specifications
Car body constructionWelded aluminium
Car length11.84 m (38.8 ft)
Width2.8 m (9.2 ft)
Height2.0 m (6.6 ft)
Doors4 per car
Maximum speed60 km/h (37 mph) (design)
50 km/h (31 mph) (service)
Weight15,000 kg (33,000 lb) per car
Traction systemMitsubishi IGBTVVVF inverter vector control
Traction motors2 × 80 kW (110 hp) 3-phase AC induction motor
Power output160 kW (210 hp)
Acceleration1 m/s2 (3.3 ft/s2)
Deceleration1 m/s2 (3.3 ft/s2) (service)
1.3 m/s2 (4.3 ft/s2) (emergency)
Electric system(s)750 V DC third rail
AAR wheel arrangementA-A
Braking system(s)Electric command pneumatic brake with regenerative brake with stand-by brake and parking brake (with variable load control and wheel slide prevention control)
Safety system(s)Kyosan APM fixed block ATC under ATO GoA 4 (UTO), with subsystems of ATP, ATS and CBI[1]
Coupling systemDellner
Track gauge1,850 mm (6 ft 2732 in)
Guide rail span: 3.2 m (10 ft 6 in)

In 2002, work began on a new S$135 million Mitsubishi Crystal Mover-based system to accommodate the planned opening of Changi Airport Terminal 3 and the projected increase in demand as the airport expanded.[8] During the upgrade, the existing C-100 system continued operations on one of the tracks while the other was upgraded from December 2004 to 16 March 2006, after which the latter resumed operations while the former was closed for upgrading.[4] Full operations finally began in November 2007 when the lines serving Terminal 3 opened.[7]

Overview

Mitsubishi delivered 16 Crystal Mover vehicles to Singapore Changi Airport, ten of which are allocated to PMS/North and six to PMS/South. Five different designs with innovative external face images derived from the original Crystal Mover design were proposed to Changi Airport, with the final vehicle design being awarded the Good Design Award in 2006.[4]

The Crystal Mover was also designed for flexible response to a variety of operations, from a one car operation to multiple coupled-car operations, depending upon the system requirements; this is seen in the use of dual-car operations for PMS/North landside and PMS/South, single-car operations for PMS/North airside and triple-car operations for T2-T3 services on PMS/North.[4]

Exterior-wise, the Crystal Mover vehicles are painted in a base livery of silver and grey, blending in with the color scheme of the airport terminal buildings. However, many units are decorated with colorful promotional liveries. Trains come in two interior color schemes: blue for PMS/North trains, and orange for PMS/South trains.[7]

All Crystal Mover vehicles have four wide-opening doors, two on each side. The interior features longitudinal seating at both ends of the car for a total of 8 seats, with a spacious standing area in the middle of the car for baggage and trolleys. At the ends of every car, an equipment housing offers a flat platform for additional seating. Trains were also fitted with two LED text displays located near the ceiling which display travel information, and two media screens displaying Airport promotional material.[7]

Train formation

The configuration of a Crystal Mover in revenue service is just the one car. With both the motors and the third rail current collectors, the train cars can be coupled up to 2 or 3 cars during service.

Signalling and operations

In the Changi Airport Skytrain, the signaling system and the automatic operation system utilise a train detection system based on the check-in/check-out principle, an ATC and an overrun protection system (ORP) by on-board ATP. When a train enters the ORP signal aspect section, the on-board ATP device creates the ORP control pattern in a manner which protects the fixed-point stop control pattern by the on-board ATO. If the train speed overshoots the ORP control pattern, the emergency brake is activated, safely bringing the train to an emergency stop.[4]

The system also uses a by-pass operation between Terminals 2 and 3, where trains are placed under synchronous control so that they depart and arrive at each corresponding station at the same time. Specifically, the station departing times are synchronized by the count of the station dwell time which is automatically adjusted based on the stoppage state at the station. Also, the train speed is adjusted by ATO which recognizes signals which are sent from the way-side control devices to the on-board control device at the time of departure from a station so that the crossing times in the bypass section are optimized and their arrival times are synchronized.[4]

Redevelopment works

In 2015, one portion of the Changi Airport Skytrain system connecting Station B and E was suspended due to construction works for Jewel Changi Airport. Passengers in the public area had to use the mezzanine level bridge along Changi Airport MRT station, and the Skytrain operating between Station A and F in the airside.[6] Landside operations for services between stations A and F only resumed in July 2019.

Expansion

To increase the system capacity of the Skytrain, six new train cars have been purchased which subsequently entered service in 2019. The existing shuttle between Terminals 2 and 3 was upgraded to a three-car system, whereas the shuttle between Terminal 3 and 3 South was upgraded to a two-car system.[9]

Terminal 4, opened in 2017, is not served by the Skytrain. However, the future Terminal 5 will also have an underground automated people mover system.[10]

References

  1. ^ a b . Archived from the original on 16 June 2020. Retrieved 16 June 2020.
  2. ^ . CPG Corporation. Archived from the original on 29 September 2007.
  3. ^ a b "Transfer Between Terminals". www.changiairport.com.
  4. ^ a b c d e f g h i "Automated People Mover "Crystal Mover" for Singapore Changi International Airport" (PDF). Mitsubishi Heavy Industries.
  5. ^ Erlanger, Steven; Times, Special To the New York (7 December 1990). "Singapore Journal; For Hub of the East, a Mere Airport Wouldn't Do". The New York Times. ISSN 0362-4331. Retrieved 23 September 2021.
  6. ^ a b . Archived from the original on 1 April 2015. Retrieved 6 April 2015.
  7. ^ a b c d "Changi Airport Skytrain". Land Transport Guru. 29 February 2016.
  8. ^ . Changi Airport. Archived from the original on 3 January 2007.
  9. ^ "Skytrain at Changi Airport to get systems upgrade, more cabins". 3 May 2016. Retrieved 3 May 2016.
  10. ^ "Decades of groundwork for T5 to take flight". The Straits Times. 3 December 2017. Retrieved 8 April 2019.

External links

  • Changi Airport Skytrain, Land Transport Guru

changi, airport, skytrain, automated, people, mover, that, connects, terminals, singapore, changi, airport, opened, 1990, first, driverless, automated, system, kind, south, east, asia, operates, from, daily, traveling, skytrain, free, inter, terminal, journey,. The Changi Airport Skytrain is an automated people mover APM that connects Terminals 1 2 and 3 at Singapore Changi Airport Opened in 1990 it was the first driverless and automated system of its kind in South East Asia 2 The Changi Airport Skytrain operates from 05 00 to 02 30 daily 3 Traveling on the Skytrain is free and an inter terminal journey takes approximately four minutes Changi Airport SkytrainChangi Airport SkyTrain Terminal 2 stationOverviewStatusOperationalOwnerChangi Airport GroupLocaleSingaporeStations7ServiceTypeAutomated guideway transit People moverServices5Operator s Changi Airport GroupDepot s Terminal 1Rolling stockMitsubishi Crystal Mover 2006 present Adtranz C 100 1990 2006 HistoryOpened22 November 1990 32 years ago 1990 11 22 TechnicalLine length10 3 km 6 4 mi CharacterFully elevatedTrack gauge1 850 mm 6 ft 27 32 in Guide rail span 3 2 m 10 ft 6 in Electrification750 V DC third railSignallingKyosan APM fixed block ATC under ATO GoA 4 UTO with subsystems of ATP ATS and CBI 1 Route mapTerminal 1Station C Station DStation B Station EEast West Lineto Tanah MerahTerminal 3 Terminal 2Station A Station FStation ASouthLegendPMS North Public and transitPMS South Transit onlyThis diagram viewtalkeditSince 2006 the trains operating on all Skytrain lines are Crystal Movers manufactured by Mitsubishi Heavy Industries All stations are equipped with platform screen doors are air conditioned and have plasma displays indicating the arrival time of the next train With the opening of Changi Airport MRT station on 8 February 2002 the Skytrain is able to connect passengers at Terminal 1 to the MRT station entrances located at Terminals 2 and 3 3 Contents 1 History 2 System 3 Rolling stock 3 1 Adtranz C 100 3 2 Mitsubishi Heavy Industries Crystal Mover 3 2 1 Overview 4 Train formation 5 Signalling and operations 6 Redevelopment works 7 Expansion 8 References 9 External linksHistory EditIn November 1990 alongside the opening of Changi Airport s second passenger terminal the Skytrain began operations to connect the brand new Terminal 2 to the existing Terminal 1 It operated using the Adtranz C 100 4 and the ride lasted approximately 60 seconds 5 On 17 March 2006 the rolling stock was replaced with the current Mitsubishi Crystal Mover System Services were extended to the newly opened Terminal 3 and the South section opened in November 2007 with 5 new stations 6 On 24 February 2015 services between Station B and E Terminal 2 to 3 and vice versa were suspended to make way for the construction of Jewel Changi Airport The service was reopened to transit passengers on 12 April 2019 upon the opening of Jewel Changi Airport using a 3 car service It was then fully reopened for the public and transit passengers in July 2019 7 In April 2020 due to the COVID 19 pandemic drastically reducing passenger volumes services from Station B to E T2 to T3 and Station A to F T2 to T3 were suspended for all passengers as well as Station B to C T3 to T1 and Station D to E T1 to T2 services for transit passengers All Skytrain services were then fully suspended on 1 May 2020 On 27 July 2020 services from Station B to C T3 to T1 were resumed for public passengers only On 17 November 2022 services from Station B to E T3 to T2 were resumed for public passengers only System EditThe Skytrain system consists of two independent systems an airside only PMS South which provides services between Terminals 2 and 3 and between Terminal 3 main building and South Pier and a PMS North that provides services between Terminals 1 2 and 3 on both the landside and airside The system use a bypass shuttle for services between Terminals 2 and 3 and single lane shuttles for the rest of the system with both the landside and airside having their own lanes 4 The system consists of seven stations A South A B C D E and F each giving the name of the nearest boarding gate for easy recognition for passengers 4 The Main Operation Control Center is located inside the maintenance office near A South Station and the Standby Satellite Control Center is located in the center of the Terminal 3 building Either of the control centers can be used to control the entire system 4 Rolling stock EditAdtranz C 100 Edit Initially the Skytrain rolling stock consisted of Adtranz C 100s jointly built by Westinghouse and Adtranz acquired by Bombardier Although stations were designed to accommodate two car trains the C 100 trains operated in single units without a second carriage per train and the two innermost platform screen doors of each station were for emergency purposes the trains stopped at the outer half of each station with two doors on each half An Adtranz C 100 car as seen inside the landside station of Terminal 1 Interior of a C 100 car on the Skytrain as seen in the 90s The original platform screen doors used before the upgrading project on the Skytrain in 2006Mitsubishi Heavy Industries Crystal Mover Edit Mitsubishi Heavy Industries Crystal Mover Skytrain car entering terminal 3 Interior of the Skytrain Crystal Mover on PMS North trains on PMS South feature orange seatsIn service17 March 2006 16 years ago 2006 03 17 presentManufacturerMitsubishi Heavy IndustriesBuilt atMihara HiroshimaFamily nameCrystal MoverReplacedAdtranz C 100Constructed2002 20062016 2019 Expansion Entered service2006Number built22 vehiclesNumber in service22 vehiclesFormationSingle vehicles that can be coupled to form 2 or 3 car trainsFleet numbers01 22Capacity8 seated 107 standingOperator s Changi Airport GroupDepot s Terminal 1Line s servedAll Skytrain servicesSpecificationsCar body constructionWelded aluminiumCar length11 84 m 38 8 ft Width2 8 m 9 2 ft Height2 0 m 6 6 ft Doors4 per carMaximum speed60 km h 37 mph design 50 km h 31 mph service Weight15 000 kg 33 000 lb per carTraction systemMitsubishi IGBT VVVF inverter vector controlTraction motors2 80 kW 110 hp 3 phase AC induction motorPower output160 kW 210 hp Acceleration1 m s2 3 3 ft s2 Deceleration1 m s2 3 3 ft s2 service 1 3 m s2 4 3 ft s2 emergency Electric system s 750 V DC third railAAR wheel arrangementA ABraking system s Electric command pneumatic brake with regenerative brake with stand by brake and parking brake with variable load control and wheel slide prevention control Safety system s Kyosan APM fixed block ATC under ATO GoA 4 UTO with subsystems of ATP ATS and CBI 1 Coupling systemDellnerTrack gauge1 850 mm 6 ft 27 32 in Guide rail span 3 2 m 10 ft 6 in In 2002 work began on a new S 135 million Mitsubishi Crystal Mover based system to accommodate the planned opening of Changi Airport Terminal 3 and the projected increase in demand as the airport expanded 8 During the upgrade the existing C 100 system continued operations on one of the tracks while the other was upgraded from December 2004 to 16 March 2006 after which the latter resumed operations while the former was closed for upgrading 4 Full operations finally began in November 2007 when the lines serving Terminal 3 opened 7 Overview Edit Mitsubishi delivered 16 Crystal Mover vehicles to Singapore Changi Airport ten of which are allocated to PMS North and six to PMS South Five different designs with innovative external face images derived from the original Crystal Mover design were proposed to Changi Airport with the final vehicle design being awarded the Good Design Award in 2006 4 The Crystal Mover was also designed for flexible response to a variety of operations from a one car operation to multiple coupled car operations depending upon the system requirements this is seen in the use of dual car operations for PMS North landside and PMS South single car operations for PMS North airside and triple car operations for T2 T3 services on PMS North 4 Exterior wise the Crystal Mover vehicles are painted in a base livery of silver and grey blending in with the color scheme of the airport terminal buildings However many units are decorated with colorful promotional liveries Trains come in two interior color schemes blue for PMS North trains and orange for PMS South trains 7 All Crystal Mover vehicles have four wide opening doors two on each side The interior features longitudinal seating at both ends of the car for a total of 8 seats with a spacious standing area in the middle of the car for baggage and trolleys At the ends of every car an equipment housing offers a flat platform for additional seating Trains were also fitted with two LED text displays located near the ceiling which display travel information and two media screens displaying Airport promotional material 7 Train formation EditThe configuration of a Crystal Mover in revenue service is just the one car With both the motors and the third rail current collectors the train cars can be coupled up to 2 or 3 cars during service Signalling and operations EditIn the Changi Airport Skytrain the signaling system and the automatic operation system utilise a train detection system based on the check in check out principle an ATC and an overrun protection system ORP by on board ATP When a train enters the ORP signal aspect section the on board ATP device creates the ORP control pattern in a manner which protects the fixed point stop control pattern by the on board ATO If the train speed overshoots the ORP control pattern the emergency brake is activated safely bringing the train to an emergency stop 4 The system also uses a by pass operation between Terminals 2 and 3 where trains are placed under synchronous control so that they depart and arrive at each corresponding station at the same time Specifically the station departing times are synchronized by the count of the station dwell time which is automatically adjusted based on the stoppage state at the station Also the train speed is adjusted by ATO which recognizes signals which are sent from the way side control devices to the on board control device at the time of departure from a station so that the crossing times in the bypass section are optimized and their arrival times are synchronized 4 Redevelopment works EditIn 2015 one portion of the Changi Airport Skytrain system connecting Station B and E was suspended due to construction works for Jewel Changi Airport Passengers in the public area had to use the mezzanine level bridge along Changi Airport MRT station and the Skytrain operating between Station A and F in the airside 6 Landside operations for services between stations A and F only resumed in July 2019 Expansion EditTo increase the system capacity of the Skytrain six new train cars have been purchased which subsequently entered service in 2019 The existing shuttle between Terminals 2 and 3 was upgraded to a three car system whereas the shuttle between Terminal 3 and 3 South was upgraded to a two car system 9 Terminal 4 opened in 2017 is not served by the Skytrain However the future Terminal 5 will also have an underground automated people mover system 10 References Edit a b Kyosan Corporate Report 2018 Archived from the original on 16 June 2020 Retrieved 16 June 2020 Singapore Changi Airport I II III CPG Corporation Archived from the original on 29 September 2007 a b Transfer Between Terminals www changiairport com a b c d e f g h i Automated People Mover Crystal Mover for Singapore Changi International Airport PDF Mitsubishi Heavy Industries Erlanger Steven Times Special To the New York 7 December 1990 Singapore Journal For Hub of the East a Mere Airport Wouldn t Do The New York Times ISSN 0362 4331 Retrieved 23 September 2021 a b Getting between Terminal 2 amp Terminal 3 Archived from the original on 1 April 2015 Retrieved 6 April 2015 a b c d Changi Airport Skytrain Land Transport Guru 29 February 2016 Milestones of Changi Airport Changi Airport Archived from the original on 3 January 2007 Skytrain at Changi Airport to get systems upgrade more cabins 3 May 2016 Retrieved 3 May 2016 Decades of groundwork for T5 to take flight The Straits Times 3 December 2017 Retrieved 8 April 2019 External links Edit Wikimedia Commons has media related to Changi Airport Skytrain Changi Airport Skytrain Land Transport Guru Retrieved from https en wikipedia org w index php title Changi Airport Skytrain amp oldid 1126102575, wikipedia, wiki, book, books, library,

article

, read, download, free, free download, mp3, video, mp4, 3gp, jpg, jpeg, gif, png, picture, music, song, movie, book, game, games.